Filters
Collection
15 Results
-
7.7 cm Feld Kanone shell case
Technology
Steel shell case, designed to be fired from a German FK 16 or FK 96/n/a light field artillery piece. Headstamped: 529 1916 Length 229mmRELAWM01880.003
-
7.7 cm Feld Kanone Shell case
Technology
Maker: Allgemeine Elektrizitats Gesellschaft
Steel shell case, designed to be fired from a German FK 16 or FK 96/n/a light field artillery piece. Headstamped: AEG 1917 1217 Length 229mmRELAWM01880.004
-
7.7 cm Feld Kanone shell case
Technology
Steel shell case, designed to be fired from a German FK 16 or FK 96/n/a light field artillery piece. Headstamped: 66 1918 HL31 Length 229mmRELAWM01880.002
-
38 cm SK L/45 Heavy Naval Gun Cartridge Case - Germany
Technology
38 cm SK L/45 Heavy Naval gun brass cartridge case The case is 780 mm long, and is 450 mm across the base. The base has a 13 mm wide rim that protrudes 13 mm around the case. The case mouth has an o...RELAWM01828
-
Fragment of 12 inch High Explosive shell : Battleship Hill, Gallipoli
Technology
Maker: Unknown
Part of the base of a High Explosive naval shell case, including the primer.RELAWM00379
-
Gas Bomb
Technology
Gas bomb manufactured from mild steel. The casing is shattered and burst along one side of the case wall. There are no markings.RELAWM00750
-
German 38 cm (15 inch) shell fragment, Proyart
Technology
Lower section of a German 15 inch (38 centimetre) shell, including the twin driving bands. The artillery piece which fired this was probably a 38 cm SK L/45 cm, similar to the example captured by Aus...RELAWM00855
-
9.2 inch High-Explosive Howitzer Shell, sectioned
Technology
Maker: Unknown
This sectioned shell has a 75mm thick copper driving band at bottom. Although scratched in part and revealing the brass underneath, traces of the original mustard yellow paint are still visible. Stamp...RELAWM07139
-
Muzzle cover for 18cm gas projector : German Army
Technology
Maker: Unknown
Circular shaped and concave piece of compressed fibre. A pair of rectangular shaped cuts have been made through the object each measuring 8mm x 3mm. These cuts are 67mm apart. Between these two cut...REL/00834
-
Nosecap of naval shrapnel shell : Gallipoli
Technology
Maker: Unknown
Nosecap from a naval shrapnel shell. The nosecap is made of steel with a brass end, over which there would have been a pointed tip. The exterior has the remains of red and black paint and there is a b...RELAWM00377.001
-
Nosecap of naval shrapnel shell : Gallipoli
Technology
Maker: Unknown
Nosecap from a naval shrapnel shell. The nosecap is made of steel with a brass end, over which there would have been a pointed tip. The extrerior has the remains of black paint. The interior is natura...RELAWM00377.002
-
Projectiles and shrapnel balls : Battleship Hill, Gallipoli
Technology
Collection of four .303 inch calibre projectiles and nine lead shrapnel balls. Six of the balls balls are 12.5 mm in diameter, two are 15 mm in diameter and one is 18 mm in diameter. All are misshapen...RELAWM07828.002
-
Sectioned 9.2 inch Shrapnel Howitzer shell
Technology
Maker: Unknown
Sectioned 9.2 inch Shrapnel Howitzer shell. At top are two 23mm thick lines in light brown paint. Also stamped in white paint is "9.2". There is a 45mm thick copper driving band at the bottom. The sh...RELAWM07149
-
Turkish projectile : Cape Helles, Gallipoli
Technology
Maker: Unknown
Turkish cast iron artillery projectile with a rounded nose and four ridges along the side. The projectile is 75 mm diameter. The head of the shell is truncated, bored out to approx 22 mm diameter, an...RELAWM00313
-
Turkish shell nose fuze : Gallipoli
Technology
Maker: Unknown
The front section of a nose fuze used to detonate a Turkish artillery projectile. The conical shaped fuze component is 81 mm long and consists of the brass nose section set above four brass rings. The...RELAWM00430