Filters
Collection
14 Results
-
Australian Practice Rifle : Captain L C Seton, 29 Battalion, Volunteer Defence Corps
Technology
Australian practice rifle made with bush timber and has an iron butt. The butt is stamped 25. It is complete with bayonet, stamped XXV, and scabbard, capable of being unfixed and was made from part of...RELAWM24506
-
Dummy Lewis Machine Gun : 17 Battalion, Volunteer Defence Corps, Yerong Creek, NSW
Technology
Maker: Unknown
Dummy light machine gun manufactured from local materials by members of the Victorian Volunteer Defence Corps (VDC). The handle and breech of the gun are carved from wood to which has been nailed a fo...RELAWM20293.001
-
Hiroki Type 35 Sub Calibre Aiming Rifle
Technology
Hiroki Type 35 Sub Calibre Aiming Rifle. The barrel has a brass water cooled jacket with inlet and outlet ports on the top and bottom. The bolt action is single shot with an electrically fired trigger...RELAWM35459
-
3.7 inch Anti Aircraft Gun Wooden Practice Round
Technology
Maker: Maribyrnong Munitions Factory
3.7 inch Anti Aircraft gun, bottle necked, wood and brass practice cartridge. The cartridge features a brass rim, two brass sleeves at the junction of the cartridge shoulder and projectile. The nose c...REL33760
-
.303 inch Drill Mk 7 Cartridge : Royal Australian Navy
Technology
Cartridge, S.A., Drill, .303-Inch, D Mark VII. N. N indicates for Naval use. This Australian produced example was introduced for training purposes circa 1932.REL/07492
-
3 inch Mortar Barrel
Technology
Maker: Illingsworth, John Henry Francis
3 inch mortar barrel is made from ordnance steel and is painted olive drab. Markings on barrel - Sgt J. Illingsworth.RELAWM24501.001
-
3 inch Mortar Barrel Clamp & Traversing Mechanism
Technology
Maker: Illingsworth, John Henry Francis
The mortar barrel clamp and traversing mechanism is made from steel and is painted olive drab. No markings.RELAWM24501.004
-
3 inch Mortar Baseplate
Technology
Maker: Illingsworth, John Henry Francis
The mortar baseplate is made from steel and is painted olive drab. It has been reinforced with welded steel bars. Steel anchor spikes are welded to the bottom of the plate. No markings.RELAWM24501.003
-
3 inch Mortar Bipod
Technology
Maker: Illingsworth, John Henry Francis
The mortar bipod is made from ordnance steel and is painted olive drab. It can be folded for transportation. It has provisions for windage and elevation. The mortar barrel clamp is attached to the bip...RELAWM24501.002
-
Lee-Enfield No 4 Mk I* Sectioned Rifle
Technology
Lee-Enfield No 4 Mk I* Sectioned Rifle. Shortened barrel and no front stock wood. It is cut away on both sides and highlighted in red paint to expose the working mechanism. Marked on the action No4 Mk...REL/16305
-
Mark III Swift Training Rifle
Technology
Mark III Swift Training Rifle. Markings- attached on LHS of stock beneath receiver is a metal tag inscribed "THE SWIFT TRAINING RIFLE S.R. MK III 14414". The rifle case has half - scale sectioned draw...REL/16957
-
VDC 3 inch Mortar Barrel
Technology
Maker: Williams, Rayburn Keith
Volunteer Defence Corps 3 inch mortar barrel made from industrial steel. The barrel is based on a three inch mortar pattern barrel and is designed for practice and instructional training. The barrel h...RELAWM20432.001
-
VDC 3 inch Mortar Baseplate
Technology
Maker: Williams, Rayburn Keith
3 inch mortar baseplate made from steel plate. The baseplate has been reinforced with steel bars which have been welded across the surface. Anchor spikes have been welded to the bottom of the plate. T...RELAWM20432.002
-
VDC Mortar Bipod
Technology
Maker: Williams, Rayburn Keith
3 inch mortar bipod made from steel tubing. The bipod has provisions for windage and elevation adjustments. A clamp is attached to accommodate the barrel. The bipod is foldable for logistics. The bip...RELAWM20432.003