Filters
Filters (3 applied)
Clear All- type : Technology (remove)
- related places : Europe: United Kingdom, England (remove)
- maker : Unknown (remove)
-
has sound (1)
-
has video (1)
-
related units (8)
Collection
20 Results
-
Condenser : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
The 2 uF condenser is a rectangular shaped capacitor which is made from aluminium. It has two prongs extending out from one end to allow wires to be wound onto them so it can create a charge.REL35400
-
Extraction tool : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Extraction tool possibly used in deactivating mines and bombs. The extraction tool consists of a brass cylinder which is attached to a wider piece of brass tubing at the front end. Fitted around the p...REL35393
-
German (British(?)) mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
British mine part. The two piece brass unit has an externally and internally threaded collar screwed onto the lower main body. The body is threaded approximately half way up its length. The threaded e...REL35392.001
-
German magnetic mine type M3 firing unit : Lieutenant Hugh Randall Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
A German magnetic sea mine type M3 firing unit. The unit is a cylindrical main body with a central shaft extending out of either end. "1B - 171" over a circle with the number "76" within have been pa...REL35392.009
-
German mine mechanical Impact fuze : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
German mine mechanical Impact fuze Vz Z 34 A (clockwork, self destructing) as used in C and D type parachute mines (Luftmine). This fuze is designed to activate 22 seconds after impact should the mine...REL35398
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part taken from a German mine. This piece is cylindrical with five hollow arms extending from the top. Small brass sockets are located within the arms. Written in raised detail between the arm...REL35392.006
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part taken from a German mine. This piece is cylindrical with a domed top. Near the base of the dome has been etched the numbers '25425-15'. The outside of the object has a grooved middle, sim...REL35392.008
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part thought to be taken from a German mine. This piece is in a shape similar to a syringe. The lower end has a small 'needle' attached to a cylindrical barrel body and the upper end has a plu...REL35392.003
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part thought to be taken from a German mine. This piece is in a shape similar to a syringe. The lower end has a small 'needle' attached to a cylindrical barrel body and the upper end has a plu...REL35392.002
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part taken from a German mine. This piece appears to be either a fuze or a timing mechanism. The body of this piece is cylindrical. The bottom end has a small brass fan. The top end of the pie...REL35392.005
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part thought to be taken from a German mine. This piece is in a shape similar to a syringe. The lower end has a small 'needle' attached to a cylindrical barrel body and the upper end has a plu...REL35392.004
-
German mine part : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Unknown part taken from a German mine. This piece is likely to have been a cover for another piece of the mine. It is shaped like a lid to a saucepan and has a small handle on top. There are 12 holes ...REL35392.007
-
Hydrostatic clock : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Hydrostatic clock taken from a German Type C acoustic parachute mine. A cast aluminium cover with internal threads covers a trigger mechanism for the device. Inside the device a copper core is connect...REL35399
-
Magnetic mine gyroscopic gimbal mount : Lieutenant H R Syme, Royal Australian Naval Volunteer Reserve
Technology
Maker: Unknown
Type 'D' German magnetic parachute mine gyroscopic gimbal mount. The external part of the mount is made from aluminium and has several attachment points for fitting to the Type 'D' mine's outer casing...REL35397
-
Pattern 07 Bayonet frog
Technology
Maker: Unknown
Pattern 1907 leather bayonet frog. The frog is made from cowhide and is coloured dark brown. the frog is assembled using four metal studs and double canvas stitching. There is a leather belt and steel...REL35144
-
Scabbard Mark II. for Sword Bayonet, Pattern 1907, Mark I.
Technology
Maker: Unknown
The brown leather scabbard with stitching down the back has a steel frog stud locket and chape.REL29069.002
-
Ship's lifeboat from HMT Devanha which was used during the landings at Gallipoli
Technology
Maker: Unknown
The number 5 timber lifeboat from the P&O ship SS Devanha. The lifeboat is of clinker construction and has single bow and stern posts connected to a heavy exposed keel. The posts are made up of sever...RELAWM04994
-
Sword Bayonet, Pattern 1907, Mark I. : recovered from Bullecourt
Technology
Maker: Unknown
Generally intact, but heavily corroded Pattern 07 bayonet with a straight cross guard and clearance hole in the pommel. Only a small fragment of wood from the grips remains on the left side.REL/13838
-
Sword Bayonet, Pattern 1907, Mark. I : recovered from Gaba Tepe, Gallipoli
Technology
Maker: Unknown
Remains of a Pattern 07 bayonet. The hilt has plain wooden grips held to the tang with two screw bolts. There is a small hole on one side of the grips. The bayonet is missing its cross guard, muzzle r...RELAWM00327
-
Sword Bayonet, Pattern 1903 : Warrant Officer Class 1 E W Sharpe, 5th Pioneer Battalion, AIF
Technology
Maker: Unknown
Pattern 07 bayonet with single edged blade, fullered on both sides. Ring and mortise slot with locking bolt secures the bayonet to the rifle nosecap. The wooden grips are secured by two screws while t...RELAWM06199