Technology

Maker: Nagoya Army Ordnance Factory

Arisaka Type 30 Bayonet. The hilt has a hooked quillon crossguard with a muzzle ring, wooden grips rivetted to the tang and a pommel that has a T section mortise slot and a push button bolt latch. The...

RELAWM24977.001

Technology

Maker: Nagoya Army Ordnance Factory

Arisaka Type 30 Scabbard. Construction is all steel, tapering at the tip to a small finial with a rectangular frog loop on a band near the throat. The metal parts on the scabbard are blued.

RELAWM24977.002

Technology

Australian practice rifle made with bush timber and has an iron butt. The butt is stamped 25. It is complete with bayonet, stamped XXV, and scabbard, capable of being unfixed and was made from part of...

RELAWM24506

Technology

Maker: Small Arms Factory, Lithgow

Pattern 07 bayonet. The hilt has a short quillon muzzle ring crossguard, two piece wooden grips held to the tang by two screw bolts. The birds head shape pommel, with an oil drain hole, has a T secti...

REL/02800.002

Technology

Pattern 07 Bayonet & Scabbard. The blade is stamped MA 07 with 8 43 and the pommel D/99262. Wood grips marked SLAZ 52 are secured by two steel screw bolts. The steel mounted brown leather scabbard is ...

REL/05009.007

Technology

Maker: Orange Small Arms Factory

Pattern 1907 bayonet, scabbard and frog. The ricasso is stamped with, 'MA 1907 1' and '9 42' and on the other side with 'OA' as well as the broad arrow and proof markings. The grips are of wood and ar...

REL37383

Technology

Maker: Turnock, James William

Boot knife made from a Bayonet. The blade has a small crown over a 'Z' stamped under the crossguard. The original crossguard has been replaced with a steel crossguard that is wider than the original. ...

REL39085

Technology

Maker: Ceskoslovenska Zbrojovka (ZB)

Czech Model Vz 24 1924 bayonet and scabbard. This bayonet has nickel plated metal work and wooden grips held to the tang with two screw bolts. The pommel has a mortise slot and locking bolt which secu...

REL35754

Technology

Experimental Owen Sub Machine Gun Bayonet. Wooden two piece grips painted scrub green with a tubular backstrap to fit over the machine gun muzzle. The unmarked blade has a sharpened front edge and a t...

REL31074.001

Technology

Maker: Unknown

M84/98 German bayonet, 3rd Model. The hilt has wooden grips held to the tang with two screw bolts. The pommel has a mortise slot and locking bolt which secures it to the rifle nosecap.The crossguard h...

REL38441

Technology

Maker: Carl Eickhorn & Co

German hirschfanger (short sword or sword bayonet) and scabbard. The hirschfanger has a stag horn hilt with brass acorn finials, brass clam shell guard, flat round rivet button and brass grip cap. The...

REL38442

Technology

Italian Model 1891 Carcano bayonet and scabbard. The hilt is a cruciform design with a straight quillon and has a muzzle ring of 12.5 mm. The plain wooden grips are attached to the tang with two rivet...

RELAWM32409

Technology

Maker: Unknown

Lebel Model 1886 bayonet and scabbard. The bayonet has a spear point, cruciform blade that is attached to a white alloy handle. The down swept hook quillon crossguard with a muzzle ring is riveted to ...

REL34473

Technology

MAS 36 bolt action rifle complete with an integral cruciform bayonet and has the unusual configuration of having a forward facing bolt handle. The flat sided machined receiver is marked with MAS Mle ...

REL/19291

Technology

Maker: Mauser-Werke AG

Mauser Model 98 Rifle Bayonet. All blued steel with a blade that has a spear point and a single fuller to each side. The grips are plain wood held to the tang by two screw bolts. It has a Nazi proof s...

REL/19354.002

Technology

Model 1891 Carcano bayonet and scabbard. The hilt has a straight crossguard, stamped CN 1132, with a muzzle ring diameter of 12.5 mm and plain wooden grips held to the tang by two screw bolts. The pom...

REL/19284

Technology

Maker: Alexander Coppel & Co

M84/98 German bayonet early pattern 3rd Model. The hilt has wooden grips held to the tang with two screw bolts. The pommel has a mortise slot and locking bolt which secures it to the rifle nosecap. Th...

REL35753

Technology

The Owen Submachine Gun Bayonet was manufactured to fit the Owen Submachine Gun. The blade is single edge, single fullered on both sides with the entire blade having a blued finish. The hilt incorpora...

REL30052

Technology

Bayonet for Owen Machine Gun. Fixed by a 17 mm muzzle ring and mortise slot with locking bolt which fix over the muzzle and sword bar. The scabbard is a leather shortened Pattern 1907 with sheet steel...

REL/02955.002

Technology

Pattern 07 bayonet. Ricasso stamped with MA over 1907 6 '29 LITHGOW. Overall blued finish with plain wooden grips held to the tang with two screw bolts. The pommel is stamped B 20474.

REL/19642.001