Filters
Collection
35 Results
-
Brass Shell Case from Japanese 75 mm Mortar (Gallipoli)
Technology
Fired brass shell casing from a breech loaded Japanese trench mortar used by Australian forces at Gallipoli in 1915. The fired primer is still attached to the brass shell casing.RELAWM15077.001
-
7.6 cm leichte Minenwerfer 1916 n/a in Flachbahn-Lafette
Technology
Maker: Unknown
Model 1916 trench mortar mounted on a turntable that is attached to a metal baseplate. The mortar can rotated through 360 degrees. The barrel is rifled and is fitted with hydraulic recoil recuperator...REL/04285
-
7.6 cm leichte Minenwerfer 1916 n/A Trench Mortar
Technology
The Model 1916 75.88 mm Trench Mortar n/A (neue Art) was used by the Germany Army during the First World War from 1916 onwards. The trench mortar is made from ordnance steel and features a breech load...RELAWM05070
-
7.6 cm leichte Minenwerfer 1916 n/a Trench Mortar Clinometer and charge range scale
Technology
Maker: Unknown
Trench Mortar Clinometer and charge range scale with three main components: - a steel range adjusting arm marked with inscribed hatches and range distances. Slightly corroded. - A steel clamp wh...RELAWM11608
-
7.6 cm leichter Minenwerfer 1914 a/A Trench Mortar
Technology
Maker: Unknown
Early model 76 millimeter trench mortar. The mortar consists of a short rifled barrel with three recoil cylinders attached to the outside of the barrel. The baseplate is rectangular in shape and has t...RELAWM05069
-
7.6 cm Minenwerfer (Trench Mortar) Shell
Technology
Maker: Unknown
Empty German light trench mortar shell.RELAWM07696
-
17 cm mittlerer Minenwerfer n/a (trench mortar) : Captain G F Lowther, 18 Battalion, AIF
Technology
German 17 cm mittlerer Minenwerfer neuer art (medium trench mortar, new model). The weapon is a rifled muzzle-loading mortar, with six rifling grooves. The barrel length of 4.5 calibres identifies it...RELAWM05013.001
-
Damaged Stokes 3 inch mortar barrel : 6 Australian Light Trench Mortar Battery, AIF
Technology
3 inch Stokes mortar barrel. The barrel is made from ordnance steel and has been split into six longitudinal distorted lengths where the mortar shell prematurely detonated. The barrel is painted black...RELAWM00768
-
Firing lanyard for Model 1916 Grenade Launcher (Granatenwerfer 16)
Technology
Maker: Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
Twine firing lanyard approximetely 5010 mm in length and 3-4mm thick. Attached to one end is a steel clip and swivel ring approximately 100 mm. At the other end is a wooden toggle made of turned wood ...RELAWM10972.002
-
Garland trench mortar bomb : The Nek, Gallipoli
Technology
Maker: Unknown
Remains of a Garland mortar grenade. It consists of the cast iron case of the grenade, similar in shape to a mushroom. The metal is corroded and retains some of the soil in which it was found.RELAWM07819
-
Grenade Howitzer Mark 1 (Garland Mortar)
Technology
Maker: Unknown
Smooth bore trench mortar with fixed barrel set at approximately 45 degrees. The barrel is made from steel which is attached to a brass breech piece with powder recess, bolted onto a wooden block that...RELAWM00373
-
Grenade Howitzer Mark 1 (Garland Trench Mortar) : Lone Pine, Gallipoli
Technology
Steel barrel 590mm in length. with internal diameter of 65mm. Fastened to a clamp on the mid-point of the barrel is a steel stirrup, fabricated out of 6mm steel bar. This stirrup would have engaged ...RELAWM07849
-
3 inch Stokes Mortar Barrel
Technology
Maker: Unknown
3 inch Stokes Mortar barrel made from ordnance steel. The barrel is smoothbore and has a fixed firing pin in the base.RELAWM05056.001
-
3 inch Stokes Mortar Baseplate
Technology
Maker: Unknown
3 inch Stokes Mortar baseplate made from ordnance steel.RELAWM05056.002
-
3 inch Stokes Mortar Bipod
Technology
Maker: Unknown
3 inch Stokes mortar bipod made from ordnance steel. The bipod is foldable and features leg stays. The sight support bracket, cradle and elevating and traversing bracket are missing. The bipod is pain...RELAWM05056.003
-
3 inch Stokes Trench Mortar Bomb
Technology
3 inch Stokes mortar inert high explosive projectile. The mortar projectile is a steel tube shaped canister with a detonator and firing cartridge holder at the rear end and a fuze mechanism at the fro...RELAWM01909
-
Japanese mortar charge case from Gallipoli
Technology
Maker: Unknown
Mortar charge case used in a Japanese trench mortar. The mortar was manned by personnel of the Royal Garrison Artillery at Anzac.RELAWM00368
-
Kabelwerfer 49/780 (Spigot Mortar)
Technology
Spigot mortar made from steel tubing and pressed metal and attached to a rectangular wooden base. The mortar has an elevation scale on the left side and a locking lever on the base of the barrel to lo...RELAWM10983
-
Left wheel from 17 cm mittlerer Minenwerfer n/a (trench mortar) : Captain G F Lowther, 18 Battalion, AIF
Technology
Left wheel removed from German 17 cm mittlerer Minenwerfer neuer art (medium trench mortar, new model).RELAWM05013.002
-
Minenwerfer (Trench Mortar) Elevation Scale
Technology
Elevating scale from a German trench mortar.REL/00625