Filters
Filters (3 applied)
Clear All-
type (2)
-
has sound (1)
-
has video (1)
-
Conflict (4)
-
related places (4)
Collection
152 Results
-
HMAS Brisbane : Frame
Technology
Maker: Unknown
This frame is intended to be used with the Gun Plot Room door, but was collected from elsewhere in the ship. The door frame consists of a heavy L channel which is welded to the wall section. On the ch...REL32980.100
-
HMAS Brisbane : Gun Cleaning Brush (section of)
Technology
Maker: Unknown
The gun cleaning brush consists of a heavy alloy rod with a 10cm wide band of radial bristles. The centre of the rod is pierced and is fitted at each end with a section of threaded metal rod, projecti...REL32986
-
HMAS Brisbane : Gun Plot Room : Air Duct inspection cover and adjacent tally plate and bracket.
Technology
Maker: Unknown
The air duct inspection cover is a disc shaped assembly, fabricated from sheet alloy, with stamped sections welded as required and a central steel attachment point. The associated bracket/latch is a s...REL32980.021
-
HMAS Brisbane : Gun Plot Room : Air Filter
Technology
Maker: Unknown
The air filter is rectangular sheet metal case. The lid is made of L shaped channel and wire mesh and is retained by four screws. On the rear of the case is a circular hole with four screw holes and a...REL32980.048
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges, located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped end...REL32980.095
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped ends...REL32980.096
-
HMAS Brisbane : Gun Plot Room : Aluminium floor plate
Technology
Maker: Unknown
Rectangular alloy plate with a cut-out section on one corner. The panel has two irregular holes cut together with two drilled holes. This is believed to be a sample of floor panelling from the GPR. Th...REL32980.086
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 1 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.006
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 2 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.007
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.088
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.089
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.090
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.091
-
HMAS Brisbane : Gun Plot Room : Box of brackets
Technology
Maker: Unknown
A rectangular, red plastic box filled with small brackets and screws, which have been painted white. The box has masking tape over the top upon which is hand-written `Cease Fire Salvo Signal Board'.REL32980.062
-
HMAS Brisbane : Gun Plot Room : Bracket
Technology
Maker: Unknown
The bracket is attached to the wall of the GPR, adjacent to the hull of the ship (opposite door). It consists of two rectangular steel plates welded at the rear to a Z shaped U section channel frame. ...REL32980.102
-
HMAS Brisbane : Gun Plot Room : Cease Fire-CKT 2U
Technology
Maker: Unknown
The Cease Fire Circuit is a pressed brass case, circular in shape and has been painted dark blue. The top of the unit has a square brass panel attached. In the middle of the panel is a brass switch th...REL32980.066
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.081
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.082
-
HMAS Brisbane : Gun Plot Room : Cover
Technology
Maker: Unknown
The cover is rectangular, made from a folded sheet of alloy, painted grey. It consists of a top and two sides. Each side has four holes for bolting them to the correct piece of equipment. On the top o...REL32980.093
-
HMAS Brisbane : Gun Plot Room : Cover panel
Technology
Maker: Unknown
The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in various l...REL32980.087
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32980.070
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a rectangular metal case with rounded corners, with a pressed metal convex lid. The entire box has been painted white. Around the edges of the box are 10 bolts. There are two, s...REL32980.076
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box is attached directly to the wall of the gun plot room. The box is a rectangular grey box, with a removable lid with three cable access points. There are four air-vents ' 2 on the ri...REL32980.013
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32994
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box consists of a pressed circular brass body, with circular front plate, both painted dark blue. The front plate has a centrally mounted female electrical socket with leashed cover. At...REL32995
-
HMAS Brisbane : Gun Plot Room : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32980.046
-
HMAS Brisbane : Gun Plot Room : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32980.047
-
HMAS Brisbane : Gun Plot Room : Fasteners for ceiling lights and junction boxes.
Technology
Maker: Unknown
A selection of fasteners, bolts, screws and washers for fitting the Gun Plot Room ceiling lights and junction boxes. All are together in a yellow envelope in a clear plastic bag.REL32980.020
-
HMAS Brisbane : Gun Plot Room : Fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - two white and one infrared, protected by a moulded white plastic cover. The unit is attached to a ceiling mounting bracket by four bolts....REL32980.098
-
HMAS Brisbane : Gun Plot Room : Fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - 2 two white and one infrared, protected by a moulded white plastic cover. The unit is attached to a ceiling mounting bracket by four bolt...REL32980.014
-
HMAS Brisbane : Gun Plot Room : Gun Fire Control Switchboard : Front Cabinet : Pair One
Technology
Maker: Unknown
The Gun Fire Control Switchboard consists of four rectangular cabinets, arranged in two pairs. This is the front cabinet from pair one, and consists of a heavily constructed rectangular metal cabinet,...REL32980.008
-
HMAS Brisbane : Gun Plot Room : Gun Firing Trigger Handle and cable (For Mount 51)
Technology
Maker: Unknown
The gun firing trigger one of two( REL32980.067 and REL32980.069) has a cylindrical black bakelite body with a brass oval plate and trigger at the top and an electrical cable mounted at the bottom. Th...REL32980.067
-
HMAS Brisbane : Gun Plot Room : Gun Firing Trigger Handle and cable (for Mount 52)
Technology
Maker: Unknown
The gun firing trigger is the second of two ( REL32980.067 and REL32980.069) has a cylindrical black bakelite body with a brass oval plate and trigger at the top and an electrical cable mounted at the...REL32980.069
-
HMAS Brisbane : Gun Plot Room : Hand Lantern Junction Box
Technology
Maker: Unknown
The hand lantern junction box is a pressed metal unit with a circular front, secured by screws. On the back of the unit are welded three (3) brackets. There are also seven holes around the body sides ...REL32980.041
-
HMAS Brisbane : Gun Plot Room : Junction block adjustment tool
Technology
Maker: Unknown
Junction block adjustment tool. The tool consists of a moulded bakelite handle, a circular steel shaft with a machine squared key section. This tool is used with 9-S-5302-L junction block (REL32980.02...REL32980.034
-
HMAS Brisbane : Gun Plot Room : Junction block adjustment tool
Technology
Maker: Unknown
Junction block adjustment tool. The tool consists of a moulded bakelite handle, a circular steel shaft with a machine squared key section. This tool is used with 9-S-5302-L junction block. (REL32980.0...REL32980.032
-
HMAS Brisbane : Gun Plot Room : Junction block adjustment tool
Technology
Maker: Unknown
Junction block adjustment tool. The tool consists of a moulded bakelite handle, a circular steel shaft with a machine squared key section. This tool is used with 9-S-5302-L junction block (REL32980.02...REL32980.031
-
HMAS Brisbane : Gun Plot Room : Junction block adjustment tool
Technology
Maker: Unknown
Junction block adjustment tool. The tool consists of a moulded bakelite handle, a circular steel shaft with a machine squared key section. This tool is used with 9-S-5302-L junction block (REL32980.02...REL32980.033
-
HMAS Brisbane : Gun Plot Room : Junction Box
Technology
Maker: Unknown
The junction box is a square pressed sheet metal assembly. On the four sides of the box there is a cable clamp and cable access hole. There are two bolt holes on the rear face of the unit - bolts mi...REL32980.029
-
HMAS Brisbane : Gun Plot Room : Lower Escape Hatch
Technology
Maker: Unknown
An emergency escape trunk extends from the upper to the lower decks of the ship and passes through the GPR. Fittings within the room include top hatch, lower hatch and communicating ladder. The lower ...REL32980.010
-
HMAS Brisbane : Gun Plot Room : Miscellaneous I.D and instructional plates and telephone directory sheet.
Technology
Maker: Unknown
Selection of metal (10), brass (3) and plastic (2) I.D and instructional plates (15 in total) from various positions and pieces of equipment in the gun plot room. The plates range in size but all are ...REL32980.019
-
HMAS Brisbane : Gun Plot Room : Mounting board with fitting and fixtures
Technology
Maker: Unknown
The mounting board is a rectangular sheet of alloy, painted white, secured to the wall by ten bolts, and on which various fixtures are attached. In the top left hand corner is a grey metal box that ho...REL32980.016
-
HMAS Brisbane : Gun Plot Room : Pipe section and Flange
Technology
Maker: Unknown
The pipe section consists of a pipe with four welded reinforcing ribs. At one end of the pipe is a right-angled elbow terminating in a circular flange plate with eight bolt holes (no bolts). The other...REL32980.075
-
HMAS Brisbane : Gun Plot Room : Plumbing valve cover
Technology
Maker: Unknown
The cover is made of sheet alloy and is painted grey. It has two sides ' a front and a right hand side. On the front is attached a square section of Perspex, under which is paper sheets with the words...REL32980.097
-
HMAS Brisbane : Gun Plot Room : Power Supply Assembly PP-7385/SPG-53
Technology
Maker: Unknown
The low voltage Power Supply Assembly PP-7385/SPG-53 is a rectangular steel cabinet with two full-length doors hinged at the sides to provide access to six drawer-type pull-out chassis inside. The Pow...REL32980.003
-
HMAS Brisbane : Gun Plot Room : Radar Set Control OJ-401/SPG-53F
Technology
Maker: Unknown
The radar set control console consists of an upper and lower rectangular case separated by a retractable shelf. The upper section contains five (5) consoles of equipment. Each console is hinged at the...REL32980.004
-
HMAS Brisbane : Gun Plot Room : Reg/Non Reg switch
Technology
Maker: Unknown
The Reg/Non Reg unit is rectangular cast alloy case, painted grey. At the front is a stamped metal lid, secured by eight bolts. Mounted on the lid is a brass indicator plate that reads `REG' and `NON ...REL32980.044
-
HMAS Brisbane : Gun Plot Room : Salvo Signal-CKT 2VB
Technology
Maker: Unknown
The salvo signal-CKT 2VB unit is a pressed brass case with a circular cover, retained by four screws. The cover has a square brass plate and a centrally mounted switch handle, which can be moved to ei...REL32980.063
-
HMAS Brisbane : Gun Plot Room : Seat base
Technology
Maker: Unknown
Square steel plate with four locating holes. On the top of the plate is a raised circular fitting with a flange on the top edge to which the base of the chair is secured. The base is rusty and corrode...REL32980.094
-
HMAS Brisbane : Gun Plot Room : Selector box
Technology
Maker: Unknown
The selector box is rectangular, has a pressed metal body and lid, secured by four screws. The unit has been painted dark blue. Mounted on the front of the cover is a rotating selector dial with a bra...REL32980.065