Filters
Filters (5 applied)
Clear All- has sound : no (remove)
- has video : no (remove)
- maker : Unknown (remove)
- related units : Royal Australian Navy (remove)
- type : Technology (remove)
-
Conflict (7)
-
related places (7)
Collection
159 Results
-
HMAS Brisbane : Gun Plot Room : Plumbing valve cover
Technology
Maker: Unknown
The cover is made of sheet alloy and is painted grey. It has two sides ' a front and a right hand side. On the front is attached a square section of Perspex, under which is paper sheets with the words...REL32980.097
-
HMAS Brisbane : Gun Plot Room : Power Supply Assembly PP-7385/SPG-53
Technology
Maker: Unknown
The low voltage Power Supply Assembly PP-7385/SPG-53 is a rectangular steel cabinet with two full-length doors hinged at the sides to provide access to six drawer-type pull-out chassis inside. The Pow...REL32980.003
-
HMAS Brisbane : Gun Plot Room : Radar Set Control OJ-401/SPG-53F
Technology
Maker: Unknown
The radar set control console consists of an upper and lower rectangular case separated by a retractable shelf. The upper section contains five (5) consoles of equipment. Each console is hinged at the...REL32980.004
-
HMAS Brisbane : Gun Plot Room : Reg/Non Reg switch
Technology
Maker: Unknown
The Reg/Non Reg unit is rectangular cast alloy case, painted grey. At the front is a stamped metal lid, secured by eight bolts. Mounted on the lid is a brass indicator plate that reads `REG' and `NON ...REL32980.044
-
HMAS Brisbane : Gun Plot Room : Salvo Signal-CKT 2VB
Technology
Maker: Unknown
The salvo signal-CKT 2VB unit is a pressed brass case with a circular cover, retained by four screws. The cover has a square brass plate and a centrally mounted switch handle, which can be moved to ei...REL32980.063
-
HMAS Brisbane : Gun Plot Room : Seat base
Technology
Maker: Unknown
Square steel plate with four locating holes. On the top of the plate is a raised circular fitting with a flange on the top edge to which the base of the chair is secured. The base is rusty and corrode...REL32980.094
-
HMAS Brisbane : Gun Plot Room : Selector box
Technology
Maker: Unknown
The selector box is rectangular, has a pressed metal body and lid, secured by four screws. The unit has been painted dark blue. Mounted on the front of the cover is a rotating selector dial with a bra...REL32980.065
-
HMAS Brisbane : Gun Plot Room : State Indicator Units
Technology
Maker: Unknown
The mounting bracket consists of a frame welded from L shaped beams. It consists of a rectangular base piece, two pairs of side members to a single cross-piece. An L shaped alloy panel is welded to th...REL32980.017
-
HMAS Brisbane : Gun Plot Room : Stool
Technology
Maker: Unknown
The stool consists of a square padded top cushion with a brown vinyl cover and a lower section made of square steel tube and consisting of four legs and four cross-bracing members. There is a metal cl...REL32980.078
-
HMAS Brisbane : Gun Plot Room : Stool
Technology
Maker: Unknown
The stool has four black metal legs, strengthened by four pieces of metal which have been welded to the legs about one third of the way up the stool. On the top of the stool is a brown, padded, vinyl ...REL32980.079
-
HMAS Brisbane : Gun Plot Room : T' bracket
Technology
Maker: Unknown
The bracket consists of two sections of alloy L channel, welded into a T shape and painted white on the external surfaces. The short arm of the T has two bolt holes, while the long arm has one.REL32980.064
-
HMAS Brisbane : Gun Plot Room : Torch Stowage
Technology
Maker: Unknown
Torch stowage fitting consisting of a short section of tube ' partially cut away, and a welded rectangular bracket with two (2) mounting bolts. The unit is painted red. Used to stow Navy type torchREL32980.061
-
HMAS Brisbane : Gun Plot Room : Torch Stowage
Technology
Maker: Unknown
Torch stowage fitting consisting of a short section of tube ' partially cut away, and a welded rectangular bracket with two (2) mounting bolts. The unit is painted red. Used to stow Navy type torchREL32980.060
-
HMAS Brisbane : Gun Plot Room : Transformer
Technology
Maker: Unknown
The transformer is located in the Gun Plot Room mounted on either the wall or the ceiling (plans do not specify exact location). It consists of two, grey, rectangular boxes which are being held togeth...REL32980.015
-
HMAS Brisbane : Gun Plot Room : Upper Escape Hatch
Technology
Maker: Unknown
The top hatch is not held but an equivalent example was obtained from the Flag Deck. It is similar in construction but the hatch hinge fittings are attached to the deck beside the hatch mounting ring....REL32980.011
-
HMAS Brisbane : Gun Plot Room : watertight door dogging tool
Technology
Maker: Unknown
Steel tube, 30.4 cm (one foot) in length and 2.5 cm (one inch) in diameter. Painted red.REL32980.030
-
HMAS Brisbane : Gun Plot Room : 9-way Junction Block, marked A,B,C
Technology
Maker: Unknown
The unit is a 9-way junction block and consists of a triangular block with three holes for mounting screws. Moulded onto this is a cylindrical section with a removable lid. The lid is pierced for nine...REL32980.026
-
HMAS Brisbane : Gun Plot Room : 9-Way Junction Block, marked A,B,C
Technology
Maker: Unknown
The unit is a 9-way junction block and consists of a triangular block with three holes for mounting screws. Moulded onto this is a cylindrical section with a removable lid. The lid is pierced for nine...REL32980.027
-
HMAS Brisbane : Gun Plot Room : White steel bracket
Technology
Maker: Unknown
The bracket consists of three main sections of L section channel, comprising two angled legs and a cross piece. At the base of each leg are two bolt holes. At each junction of the leg and cross piece ...REL32980.101
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33013
-
HMAS Brisbane : Hand-held Microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33010
-
HMAS Brisbane : Hand-held Microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33002
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33012
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33014
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33011
-
HMAS Brisbane : Hardware for GMLS
Technology
Maker: Unknown
Bolts from the HMAS Brisbane, approx. 50 items. All bolts are approx. half an inch, hex headed bolts.REL33062
-
HMAS Brisbane : Headset and microphone
Technology
Maker: Unknown
The headset consists of a metal framed adjustable headset with a pair of white padded ear-phones. The ear-pieces have no company name pressed into them. The top of the headset is has no covering or pa...REL33023
-
HMAS Brisbane : HMAS Brisbane Safety File
Technology
Maker: Unknown
The HMAS Brisbane safety file is an A4 size book, with a blue cardboard front and back cover and black binding on the left side. On the cover of the book is the HMAS Brisbane motif and written `HMAS B...REL33028
-
HMAS Brisbane : Loudspeaker Horn
Technology
Maker: Unknown
The loudspeaker horn consists of a spun brass bowl. Attached to the back is a shallow alloy dish, with three bolt holes. There are no markings or nomenclature plates on the speaker.REL33043
-
HMAS Brisbane : Microphone Jack Box (body only)
Technology
Maker: Unknown
The Microphone Jack Box (body only) consists of a circular stamped brass body, with two welded brackets at the back, with three bolt holes. The front panel is missing. Inside the unit are 8 sets of 2 ...REL33064
-
HMAS Brisbane : Propeller : Base cover section 2 of 2
Technology
Maker: Unknown
The propeller base cover is a curved piece of metal, with 14 screw holes, 7 at the top and bottom. The cover is used in conjunction with REL32984.001, REL32984.002, REL32984.003 and REL32984.005.REL32984.004
-
HMAS Brisbane : Propeller : Base cover section 1 of 2
Technology
Maker: Unknown
The propeller base cover is a curved piece of metal, with 14 screw holes, 7 at the top and 7 at the base. The cover is used in conjunction with REL32984.001, REL32984.002, REL32984.004 and REL32984.00...REL32984.003
-
HMAS Brisbane : Propeller : Propeller Fairing
Technology
Maker: Unknown
The propeller fairing is cone-shaped, cast in metal. There are twelve pockets around the base of the fairing which provide access to twelve bolts (only six fitted) that attach the fairing to the main ...REL32984.002
-
HMAS Brisbane : Propeller : Propeller nut
Technology
Maker: Unknown
Cylindrical metal nut used to connect the propeller to the fairing. The nut is heavily rusted. This nut retains the propeller on the propeller shaft. There are seven 55mm wide slots arranged around th...REL32984.005
-
HMAS Brisbane : Push button box (no cover)
Technology
Maker: Unknown
The back of the single push-button switch console is circular in shape, and made of brass. There is a single bracket attached to the back of the switch with STRESS RELIEVED printed on it.REL33058
-
HMAS Brisbane : RAAF Aircrew Checklist Book
Technology
Maker: Unknown
The RAAF Aircrew Checklist Book is A5 in size, and has a blue vinyl cover and back. The words `RAAF Aircrew Checklist' are written in gold on the front cover, as well as A276 Rev.77 Stock No. 7510'66-...REL33029
-
HMAS Brisbane : Rope
Technology
Maker: Unknown
Three-strand natural fibre rope with loop on end.REL33020
-
HMAS Brisbane : Rope
Technology
Maker: Unknown
Section of brown rope from the HMAS Brisbane with a karabiner attached to the end. The rope is made of synthetic fibres.REL33019
-
HMAS Brisbane : Seat
Technology
Maker: Unknown
The seat consists of a shaped seat pan, with grey cloth padding. This is attached to a U shaped bracket, which connects to a rectangular back plate via two pivot points and a locking arm. On the back ...REL33085
-
HMAS Brisbane : Seat Bracket
Technology
Maker: Unknown
Heavy plate bracket, rectangular in shape with two rectangular sections machined from one end. It is used in associated with the Observer's Seat (REL33085). Mounted on the plate at this end is an adju...REL33086
-
HMAS Brisbane : Set of black metal brackets
Technology
Maker: Unknown
The two brackets are made from a metal L section with a folded tab at each end. The tabs are drilled with for a mounting bolt (bolt fitted). The brackets appear to be a `stay' bracket for a piece of e...REL32988
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33053
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33052
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the cover and body have been pain...REL33051
-
HMAS Brisbane : Spare Target Designation Transmitter (TDT) bellows.
Technology
Maker: Unknown
The spare TDT boot is made of grey rubber and is a concertina structure. It sits between the upper and lower sections of the TDT and maintains waterproof capability. The diameter of the TDT is 15cm.REL32987
-
HMAS Brisbane : Step
Technology
Maker: Unknown
The step consists of a single rectangular steel plate with folded edges and s non-slip paint surface. It is attached to a wedge shaped welded bracket. This in turn bolts to a heavy rod with a right an...REL33087
-
HMAS Brisbane : Steps
Technology
Maker: Unknown
Set of three steps, consisting of two U shaped side channels and three pre-fabricated cast alloy tread, each fitted with four non-slip strips. Each tread is secured by two bolts, at the top of each si...REL33084
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33042
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33041
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided brass body, with three brackets welded to the back, each with a single bolt hole. There are two electrical outlets on the side of the body. The cover is square and...REL33047