Filters
Filters (4 applied)
Clear All- has sound : no (remove)
- has video : no (remove)
- related units : RAN Destroyers (remove)
- type : Technology (remove)
-
Conflict (2)
-
location (1)
-
maker (67)
- Unknown (152)
- Dynalec Corporation (16)
- Stromberg Carlson (9)
- L. C Doane Co. (6)
- Weksler Instruments (6)
- Henschel Corporation (4)
- Hose-McCann Telephone Co. Inc. (4)
- Modern Metal MFG (4)
- Sig-Trans Inc. (4)
- Sperry Univac (4)
- Tabet Manufacturing Company, Inc. (4)
- Barry Controls (3)
- Electric Tachometer Corp (3)
- Jensen Manufacturing Co. (3)
- Moeller Instrument Co. (3)
- Sperry (3)
- Sperry Gyroscope Co (3)
- Turnbull Enterprises Inc (3)
- University Loudspeakers (3)
- University Sound (3)
- 3D Instruments Inc (2)
- Barry Controls Incorporated (2)
- Bendix Corporation Friez Instrument Division (2)
- Betts & Betts (2)
- Comsaco Inc. (2)
- Defoe Shipbuilding Co (2)
- Dynell Electronics Corp (2)
- Electronic Research Associates, INC (2)
- Federal Sign and Signal Corporation (2)
- Francis and Sons (2)
- Hughes Aircraft Company (2)
- Palmer (2)
- Raytheon Company (2)
- Rob Ian Company (2)
- Similux (2)
- Sperry Piedmont Co (2)
- Stanlite Electronics Pty Ltd (2)
- United States Instrument Corp (2)
- Ashcroft (1)
- Baldwin-Lima-Hamilton Corp. (1)
- Bendix (Pioneer Instrument Div) & Sprague Spec. Co (1)
- Chemical Industry Co. Ltd. (1)
- Clampo Products (1)
- DESCO (1)
- FMC Ordnance Division (1)
- Felsenthal Instruments Company (1)
- Francis Searchlights (1)
- General Electric (1)
- JTC (1)
- Joslyn Sunbank Company LLC (1)
- Marine Electric Corporation (1)
- Marine Instrument Co. (1)
- Moeller (1)
- Moore Products Co. (1)
- Overbeke-Kain Co. (1)
- Princo Instruments Inc. (1)
- Radio Engineering Products (1)
- Rascal Acoustics (1)
- Rois Manufacturing Company (1)
- S.H Couch Co Inc (1)
- Staedtler (1)
- Telectro Systems Corp (1)
- The Hygrographic Department of the Admiralty (1)
- The W. H Reisner MFG Co. (1)
- Tombow Pencil Company Limited (1)
- W&G (1)
- Wing Corporation (1)
Show More
Collection
293 Results
-
HMAS Brisbane : Engine Room : Rudder Angle Indicator
Technology
Maker: Sig-Trans Inc.
The rudder angle indicator has a rectangular cover with 5 screw holes and an inset circular acrylic disc in the middle. Above the disc is a black plaque reading RUDDER ANGLE IND. Below the disc is a n...REL32981.021
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Siren Type 1C/S2S
Technology
Maker: Federal Sign and Signal Corporation
The siren consists of a cylindrical cast alloy case and circular front cover with cut-outs. The circular cover also has `Federal Sign and Signal Corp ' Blue Island Illinois' engraved on the metal. The...REL32981.032
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001
-
HMAS Brisbane : Engine Room : Switch unit
Technology
Maker: Palmer Unknown
The brass switch consists of a pressed metal case with a single attachment bracket welded to the back and drilled for two bolt holes. There are two cable fittings in the side of the case. The face is ...REL32981.031
-
HMAS Brisbane : Engine Room : Tartar Missile Launch Magazine Plate
Technology
Maker: Unknown
The tarter missile launch plate is a rectangular alloy plate with printed instructions for procedures that should be followed in case of Harpoon Fuel Leakage. It also contains instructions for recomme...REL32981.008
-
HMAS Brisbane : Fencing and Cabling missile launch cap
Technology
Maker: Unknown
The fencing and cabling is made up of four 1420mm long and three 1115mm long grey metal poles. The poles are 50mm in diameter. Each pole is secured to a metal bracket at its base which is then bolted ...REL33076
-
HMAS Brisbane : Fire Extinguisher holder
Technology
Maker: Unknown
The fire extinguisher holder is rectangular at the back with angles sides and base. It is made of metal and painted red. It has a black belt with buckle connected to the left hand side, which is used ...REL32993
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33070
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33069
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33068
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MS17181-14...REL33071
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MS17181-14...REL33067
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co. L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads MIL-F-16377...REL33066
-
HMAS Brisbane : Foot switch
Technology
Maker: Unknown
Foot switch, made of metal, painted grey. The switchl is rectangular at the back and rounded at the front. The top section of the foot switchl is grooved for better grip. A power cable protrudes from ...REL32990
-
HMAS Brisbane : Foot switch
Technology
Maker: Dynell Electronics Corp
Foot switch, made of metal, painted grey. The switch is rectangular at the back and rounded at the front. The top section of the foot switch is grooved for better grip. A nomenclature plate on the rig...REL32991
-
HMAS Brisbane : Frame
Technology
Maker: Unknown
This frame is intended to be used with the Gun Plot Room door, but was collected from elsewhere in the ship. The door frame consists of a heavy L channel which is welded to the wall section. On the ch...REL32980.100
-
HMAS Brisbane : Gun Cleaning Brush (section of)
Technology
Maker: Unknown
The gun cleaning brush consists of a heavy alloy rod with a 10cm wide band of radial bristles. The centre of the rod is pierced and is fitted at each end with a section of threaded metal rod, projecti...REL32986
-
HMAS Brisbane : Gun Plot Room : Air Duct inspection cover and adjacent tally plate and bracket.
Technology
Maker: Unknown
The air duct inspection cover is a disc shaped assembly, fabricated from sheet alloy, with stamped sections welded as required and a central steel attachment point. The associated bracket/latch is a s...REL32980.021
-
HMAS Brisbane : Gun Plot Room : Air Filter
Technology
Maker: Unknown
The air filter is rectangular sheet metal case. The lid is made of L shaped channel and wire mesh and is retained by four screws. On the rear of the case is a circular hole with four screw holes and a...REL32980.048
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges, located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped end...REL32980.095
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped ends...REL32980.096
-
HMAS Brisbane : Gun Plot Room : Aluminium floor plate
Technology
Maker: Unknown
Rectangular alloy plate with a cut-out section on one corner. The panel has two irregular holes cut together with two drilled holes. This is believed to be a sample of floor panelling from the GPR. Th...REL32980.086
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 1 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.006
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 2 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.007
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.088
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.089
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.090
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.091
-
HMAS Brisbane : Gun Plot Room : Box of brackets
Technology
Maker: Unknown
A rectangular, red plastic box filled with small brackets and screws, which have been painted white. The box has masking tape over the top upon which is hand-written `Cease Fire Salvo Signal Board'.REL32980.062
-
HMAS Brisbane : Gun Plot Room : Bracket
Technology
Maker: Unknown
The bracket is attached to the wall of the GPR, adjacent to the hull of the ship (opposite door). It consists of two rectangular steel plates welded at the rear to a Z shaped U section channel frame. ...REL32980.102
-
HMAS Brisbane : Gun Plot Room : Cable with plaited plastic covering.
Technology
Maker: Joslyn Sunbank Company LLC
The cable is covered with a finely woven acrylic cover, terminating in two large multi-pinned plugs. On one end of the cable is a large metal 31 pin socket. There is an adjustable metal rim around th...REL32980.077
-
HMAS Brisbane : Gun Plot Room : Cease Fire-CKT 2U
Technology
Maker: Unknown
The Cease Fire Circuit is a pressed brass case, circular in shape and has been painted dark blue. The top of the unit has a square brass panel attached. In the middle of the panel is a brass switch th...REL32980.066
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.081
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.082
-
HMAS Brisbane : Gun Plot Room : Computer Set Control Mk 167 Mod 3
Technology
Maker: Sperry Gyroscope Co
The Computer Set Control is a rectangular metal cabinet. Attached to the front is a set of three angled consoles mounted on a metal frame. The base of the middle console protrudes to make up a table. ...REL32980.005
-
HMAS Brisbane : Gun Plot Room : Control Panel Mk 146 Md 1
Technology
Maker: General Electric
The Control Panel Mk 146 Md 1 is located on the back wall of the gun plot room. It is a rectangular metal cabinet that has been painted grey. On the rear face of the cabinet are eight shock mountings ...REL32980.012
-
HMAS Brisbane : Gun Plot Room : Cover
Technology
Maker: Unknown
The cover is rectangular, made from a folded sheet of alloy, painted grey. It consists of a top and two sides. Each side has four holes for bolting them to the correct piece of equipment. On the top o...REL32980.093
-
HMAS Brisbane : Gun Plot Room : Cover panel
Technology
Maker: Unknown
The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in various l...REL32980.087
-
HMAS Brisbane : Gun Plot Room : Data Processing Set AN/UYK-20(V)
Technology
Maker: Sperry Sperry Univac
The front of the Data Processing Set (DPS) is a square metal unit with a right hinged door at the front, which is called the control monitor. A small control panel containing several switches and indi...REL32980.002
-
HMAS Brisbane : Gun Plot Room : Door
Technology
Maker: Overbeke-Kain Co.
The door from the gun plot room is a rectangular metal door with rounded corners. The front face is a pressed metal sheet. The top right hand corner has a diagonal section painted painted red, and the...REL32980.099
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Hose-McCann Telephone Co. Inc.
The electrical box has a pressed brass body with a square front plate. The plate is brass and provides mounting for two single-pin female electrical supply sockets, which have black plastic leashed (a...REL32980.038
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box consists of a pressed circular brass body, with circular front plate, both painted dark blue. The front plate has a centrally mounted female electrical socket with leashed cover. At...REL32980.068
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Hose-McCann Telephone Co. Inc.
The electrical box has a pressed brass body (painted dark blue) with a square front plate. The front plate is made of brass and provides mounting for two single-pin female electrical sockets. Both soc...REL32980.040
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32980.070
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a rectangular metal case with rounded corners, with a pressed metal convex lid. The entire box has been painted white. Around the edges of the box are 10 bolts. There are two, s...REL32980.076
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box is attached directly to the wall of the gun plot room. The box is a rectangular grey box, with a removable lid with three cable access points. There are four air-vents ' 2 on the ri...REL32980.013
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32994
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box consists of a pressed circular brass body, with circular front plate, both painted dark blue. The front plate has a centrally mounted female electrical socket with leashed cover. At...REL32995
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box has a pressed brass body with a square front plate. The front plate is made brass and provides mounting for two single-pin female electrical sockets, both of which have a black leas...REL32980.039