Filters
Collection
293 Results
-
HMAS Brisbane : Gun Plot Room : Stable Element Mk 16 Mod 11
Technology
Maker: Sperry Gyroscope Co
The SE is a floor-mounted component. The Stable Element (SE) is a rectangular metal unit with an angled top and a large access door at the front. On the angled top panel is a variety of controls and i...REL32980.001
-
HMAS Brisbane : Gun Plot Room : Starter Motor
Technology
Maker: Raytheon Company
The starter motor is a rectangular metal case with a hinged front panel retained by two screws at the top corners. On the cover are mounted a plated handle, two nomenclature plates and a DANGER 440 VO...REL32980.049
-
HMAS Brisbane : Gun Plot Room : State Indicator Units
Technology
Maker: Unknown
The mounting bracket consists of a frame welded from L shaped beams. It consists of a rectangular base piece, two pairs of side members to a single cross-piece. An L shaped alloy panel is welded to th...REL32980.017
-
HMAS Brisbane : Gun Plot Room : Stool
Technology
Maker: Unknown
The stool consists of a square padded top cushion with a brown vinyl cover and a lower section made of square steel tube and consisting of four legs and four cross-bracing members. There is a metal cl...REL32980.078
-
HMAS Brisbane : Gun Plot Room : Stool
Technology
Maker: Unknown
The stool has four black metal legs, strengthened by four pieces of metal which have been welded to the legs about one third of the way up the stool. On the top of the stool is a brown, padded, vinyl ...REL32980.079
-
HMAS Brisbane : Gun Plot Room : T' bracket
Technology
Maker: Unknown
The bracket consists of two sections of alloy L channel, welded into a T shape and painted white on the external surfaces. The short arm of the T has two bolt holes, while the long arm has one.REL32980.064
-
HMAS Brisbane : Gun Plot Room : Telephone (Dynalec) Type G, complete unit.
Technology
Maker: Dynalec Corporation
The telephone unit consists of a rectangular alloy box, with an angled face, made of stainless steel sheet. On the face is attached a telephone hand piece and mounting, a telephone dial mechanism, ind...REL32980.028
-
HMAS Brisbane : Gun Plot Room : Torch Stowage
Technology
Maker: Unknown
Torch stowage fitting consisting of a short section of tube ' partially cut away, and a welded rectangular bracket with two (2) mounting bolts. The unit is painted red. Used to stow Navy type torchREL32980.061
-
HMAS Brisbane : Gun Plot Room : Torch Stowage
Technology
Maker: Unknown
Torch stowage fitting consisting of a short section of tube ' partially cut away, and a welded rectangular bracket with two (2) mounting bolts. The unit is painted red. Used to stow Navy type torchREL32980.060
-
HMAS Brisbane : Gun Plot Room : Transformer
Technology
Maker: Unknown
The transformer is located in the Gun Plot Room mounted on either the wall or the ceiling (plans do not specify exact location). It consists of two, grey, rectangular boxes which are being held togeth...REL32980.015
-
HMAS Brisbane : Gun Plot Room : Upper Escape Hatch
Technology
Maker: Unknown
The top hatch is not held but an equivalent example was obtained from the Flag Deck. It is similar in construction but the hatch hinge fittings are attached to the deck beside the hatch mounting ring....REL32980.011
-
HMAS Brisbane : Gun Plot Room : watertight door dogging tool
Technology
Maker: Unknown
Steel tube, 30.4 cm (one foot) in length and 2.5 cm (one inch) in diameter. Painted red.REL32980.030
-
HMAS Brisbane : Gun Plot Room : 9-way Junction Block, marked A,B,C
Technology
Maker: Unknown
The unit is a 9-way junction block and consists of a triangular block with three holes for mounting screws. Moulded onto this is a cylindrical section with a removable lid. The lid is pierced for nine...REL32980.026
-
HMAS Brisbane : Gun Plot Room : 9-Way Junction Block, marked A,B,C
Technology
Maker: Unknown
The unit is a 9-way junction block and consists of a triangular block with three holes for mounting screws. Moulded onto this is a cylindrical section with a removable lid. The lid is pierced for nine...REL32980.027
-
HMAS Brisbane : Gun Plot Room : White steel bracket
Technology
Maker: Unknown
The bracket consists of three main sections of L section channel, comprising two angled legs and a cross piece. At the base of each leg are two bolt holes. At each junction of the leg and cross piece ...REL32980.101
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33013
-
HMAS Brisbane : Hand-held Microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33010
-
HMAS Brisbane : Hand-held Microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33002
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33012
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33014
-
HMAS Brisbane : Hand-held microphone mouthpiece
Technology
Maker: Unknown
The hand-held microphone mouthpiece is made of black bakelite, is shaped like an upside-down tear and has a circular silver mouthpiece/speaker. Above the mouthpiece is a black push-button that allows ...REL33011
-
HMAS Brisbane : Hardware for GMLS
Technology
Maker: Unknown
Bolts from the HMAS Brisbane, approx. 50 items. All bolts are approx. half an inch, hex headed bolts.REL33062
-
HMAS Brisbane : Headset and microphone
Technology
Maker: Unknown
The headset consists of a metal framed adjustable headset with a pair of white padded ear-phones. The ear-pieces have no company name pressed into them. The top of the headset is has no covering or pa...REL33023
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33008
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33003
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Rascal Acoustics
The headset is in several pieces. The earpieces are black, one of them has the company name Rascal Acoustics England pressed into it. The other earpiece has a microphone connected to the back of it vi...REL33009
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33015
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Stromberg Carlson
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33005
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33004
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33017
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33007
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Stromberg Carlson
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33016
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33006
-
HMAS Brisbane : Headset/intercom unit with cables attached
Technology
Maker: Dynalec Corporation
The headset and intercom unit consists of two sections ' a metal framed adjustable headset with a pair of padded ear-phones and a chest set consisting of microphone attached to an angled bracket and p...REL33001
-
HMAS Brisbane : Headset unit with cables attached
Technology
Maker: JTC
The headset is a metal framed adjustable unit with a pair of movable, padded grey plastic ear-phones. The top of the head-set is covered in black padded plastic. The ear-pieces have a sticker with com...REL32999
-
HMAS Brisbane : HMAS Brisbane Safety File
Technology
Maker: Unknown
The HMAS Brisbane safety file is an A4 size book, with a blue cardboard front and back cover and black binding on the left side. On the cover of the book is the HMAS Brisbane motif and written `HMAS B...REL33028
-
HMAS Brisbane : Introducer, digital data
Technology
Maker: Sperry Univac
The Introducer is a square metal unit, painted grey. The front of the unit is angled and then flattens out to a flat `desk' section. Instruments on the sloped panel are under a grey pull-down panel, a...REL33083
-
HMAS Brisbane : Launching System, Module, Mark 90, Mod 1 Console
Technology
Maker: Sperry Univac
The launching system console consists of a rectangular, fabricated metal unit, painted grey. The front section is angled and then straightens into a flat metal `desk' section. The instruments on the s...REL33082
-
HMAS Brisbane : Loudspeaker
Technology
Maker: Jensen Manufacturing Co.
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker is housed in the front panel which is attached by four screws. The unit has a metal base (painted white) while the fron...REL32989
-
HMAS Brisbane : Loudspeaker Horn
Technology
Maker: Unknown
The loudspeaker horn consists of a spun brass bowl. Attached to the back is a shallow alloy dish, with three bolt holes. There are no markings or nomenclature plates on the speaker.REL33043
-
HMAS Brisbane : Marine Navigational Chart.
Technology
Maker: Felsenthal Instruments Company
The marine navigational chart consists of several elements ' A clear sheet of plastic, to which is attached a circular True Index wheel, a comparative yards/speed chart and a plastic circular mile/min...REL33035
-
HMAS Brisbane : Marking graph pencils (x2)
Technology
Maker: Tombow Pencil Company Limited
Two packets of Yellow Tombow Marking Graph Pencils. There are 12 pencils in each packet. The boxes are orange and brown, with a hole in the packaging so that the colour of the pencils can be seen. The...REL33031
-
HMAS Brisbane : Microphone Jack Box
Technology
Maker: Dynalec Corporation
The Microphone Jack Box (base only) consists of a stamped brass body, with two welded brackets at the back, with three bolt holes. The front panel is missing. The base is circular in shape, and has a ...REL33063
-
HMAS Brisbane : Microphone Jack Box
Technology
Maker: Dynalec Corporation
The Microphone Jack Box consists of a multi-sided brass casing with two welded brackets on the back with three bolt holes. On the front is a cover attached by four screws. Mounted on the cover are two...REL33045
-
HMAS Brisbane : Microphone Jack Box (body only)
Technology
Maker: Unknown
The Microphone Jack Box (body only) consists of a circular stamped brass body, with two welded brackets at the back, with three bolt holes. The front panel is missing. Inside the unit are 8 sets of 2 ...REL33064
-
HMAS Brisbane : One Man Control
Technology
Maker: FMC Ordnance Division
The One Man Control is a rectangular metal unit, with an angled front. There is a black handle/trigger on the right and left sides of the unit. A nomenclature plate at the back of the unit reads: `Dep...REL33072
-
HMAS Brisbane : Plan Position Indicator Display Console
Technology
Maker: Hughes Aircraft Company
The plan position indicator display console consists of a rectangular metal unit, painted grey, with a table projecting from the front, an angles section above the desk with the controls and cathode r...REL33081
-
HMAS Brisbane : Pressure Gauge
Technology
Maker: Princo Instruments Inc.
The gauge is mounted on a flat panel of metal, which has been painted in splotches of blue, black, white and grey. In the middle of the panel is a rectangular, vertically mounted indicator gauge. The ...REL33075
-
HMAS Brisbane : Propeller : Base cover section 2 of 2
Technology
Maker: Unknown
The propeller base cover is a curved piece of metal, with 14 screw holes, 7 at the top and bottom. The cover is used in conjunction with REL32984.001, REL32984.002, REL32984.003 and REL32984.005.REL32984.004
-
HMAS Brisbane : Propeller : Base cover section 1 of 2
Technology
Maker: Unknown
The propeller base cover is a curved piece of metal, with 14 screw holes, 7 at the top and 7 at the base. The cover is used in conjunction with REL32984.001, REL32984.002, REL32984.004 and REL32984.00...REL32984.003