Filters
Filters (2 applied)
Clear All-
type (2)
-
has sound (1)
-
has video (1)
-
Conflict (4)
-
related places (4)
Collection
158 Results
-
Captain's chair: HMAS Brisbane bridge
Technology
Maker: Unknown
The chair has a metal base and frame, the seat is upholstered in leather and consists of seat cushion and adjustable back and head- rest. The seat is a Holden Special Vehicle type, with the Holden HSV...REL32979.009
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
Aerial mast base. This base is used in conjunction with the nine Aerial Mast components (REL33079) The base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fit...REL33078
-
HMAS Brisbane : Aerial mast components
Technology
Maker: Unknown
Nine (9) sections of aerial mast component, of different width and length. These components are used in conjunction with the four Aerial Mast bases (REL33078) Some of the sections (5) are covered with...REL33079
-
HMAS Brisbane : Anchor
Technology
Maker: Unknown
The anchor consists of two sections, the first is a cast steel shank with square cross section. At the uppermost part is a single steel pivot channel for connection to the anchor chain. At the base of...REL33094
-
HMAS Brisbane : Bell
Technology
Maker: Unknown
The bell consists of a triangular cast body with a plated finish. The bell is partially cut away at the top, and there is a square hole cut from the upper half of the unit. At the top of the bell are ...REL32998
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Unknown
The bell unit consists of a pressed metal body, although the cover is missing. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. Printed on one of the br...REL33065
-
HMAS Brisbane : Box
Technology
Maker: Unknown
Metal box fabricated from riveted sheet alloy, with a single hinged door hinged on the right hand side with a latch on the left side. The interior of the box is divided into four equal compartments. T...REL32997
-
HMAS Brisbane : Box of sample cables
Technology
Maker: Unknown
Sample of cables of varying lengths, thickness and use.REL33091
-
HMAS Brisbane : Cell Location plate
Technology
Maker: Unknown
The plate is rectangular, made of polished stainless steel and has five holes around the edges for bolting it to the relevant equipment. Engraved on the plate is CELL LOCATION, and then Cell No.1 ' Ce...REL33073
-
HMAS Brisbane : Charge/Voltage indicator
Technology
Maker: Unknown
The charge/voltage indicator consists of a piece of flat rectangular metal, painted grey, with a clear plastic tube on the right hand side, held in place by two brackets. Written on the tube is `Maxim...REL32992
-
HMAS Brisbane : Chinagraph pencils (x9)
Technology
Maker: Staedtler Unknown
Nine packets of Chinagraph pencils. There are 10 pencils in each packet. The packets are green (x2), brown (x2), red (x2), white (x2), blue (x1).REL33030
-
HMAS Brisbane : Combat Data Centre : Ceiling fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - two white and one infrared, protected by a moulded white plastic cover. There are four mounting points attached to the back of the unit. ...REL32982.006
-
HMAS Brisbane : Combat Data Centre : Chair base
Technology
Maker: Unknown
The base is fabricated from alloy sheet, is square in shape and is reinforced below with welded L channel. In the middle of the top surface is a raised circular section into which the base pole of the...REL32982.002
-
HMAS Brisbane : Combat Data Centre : Dark Blue nylon/plastic material.
Technology
Maker: Unknown
Section of dark blue nylon/plastic material used to cover seats etc. There are several meters of material, which was given to the AWM as a spare. (PROP MATERIAL)REL32982.041
-
HMAS Brisbane : Combat Data Centre : Fluorescent light
Technology
Maker: Unknown
The fluorescent light has a rectangular metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the middle a...REL32982.003
-
HMAS Brisbane : Combat Data Centre : Intercommunication station with cables.
Technology
Maker: Unknown
The intercommunication station consists of a rectangular cast metal case, painted grey, with a cast lid, secured by four screws. On the top of the unit are two exit points for cables (unused). On the ...REL32982.030
-
HMAS Brisbane : Combat Data Centre : Lamp fitting
Technology
Maker: Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, two oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the base is a ...REL32982.028
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top of t...REL32982.021
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Unknown
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, two oval mounting brackets are riveted to the back of each. At the lower rear edge is a plated metal f...REL32982.027
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.024
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.025
-
HMAS Brisbane : Combat Data Centre : Red Warning Light
Technology
Maker: Unknown
The red warning light consists of a cylindrical pressed metal body, with a mounting bracket secured to the back. The bracket is rectangular and has two holes. The circular front of the unit is made of...REL32982.011
-
HMAS Brisbane : Combat Data Centre : Remote Chain Selector Unit
Technology
Maker: Unknown
The Remote Chain Selector Unit is a rectangular metal case, with two L shaped metal brackets attached to the rear left and right edges. Each bracket has two bolt holes. On the top of the unit is a rec...REL32982.013
-
HMAS Brisbane : Combat Data Centre : Socket box
Technology
Maker: Unknown
The socket box consists of a rectangular cast metal case, painted grey. On the front is a cast cover panel secured by four screws. On the front of the panel is an embossed inscription which reads: `So...REL32982.031
-
HMAS Brisbane : Combat Data Centre : Sound Power Circuit Control Box
Technology
Maker: Unknown
The Sound Power Circuit Control Box is a square metal case, painted silver. On the back of the unit are two mounting holes, at the base are two cable clamps - approx 50cm of cable projects. The front ...REL32982.012
-
HMAS Brisbane : Combat Data Centre : Telephone handset bracket
Technology
Maker: Unknown
The telephone handset bracket is made of two sections, the front is a pressed metal rectangular dish with rounded ends, partially cut away to allow the phone to be inserted. The rear section is anothe...REL32982.008
-
HMAS Brisbane : Door
Technology
Maker: Unknown
The door consists of two pressed metal panels secured to a welded frame. In the lower half of the door is a hinged access panel secured by two sliding bolts at the top. The door is painted light blue ...REL33090
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator Gauge
Technology
Maker: Unknown
The propeller revolution indicator gauge has a square cast alloy cover, with an inset circular acrylic disc in the middle. The cast alloy body of the unit is attached to the Engine Room gauge board. T...REL32981.024
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001
-
HMAS Brisbane : Engine Room : Switch unit
Technology
Maker: Palmer Unknown
The brass switch consists of a pressed metal case with a single attachment bracket welded to the back and drilled for two bolt holes. There are two cable fittings in the side of the case. The face is ...REL32981.031
-
HMAS Brisbane : Engine Room : Tartar Missile Launch Magazine Plate
Technology
Maker: Unknown
The tarter missile launch plate is a rectangular alloy plate with printed instructions for procedures that should be followed in case of Harpoon Fuel Leakage. It also contains instructions for recomme...REL32981.008
-
HMAS Brisbane : Fencing and Cabling missile launch cap
Technology
Maker: Unknown
The fencing and cabling is made up of four 1420mm long and three 1115mm long grey metal poles. The poles are 50mm in diameter. Each pole is secured to a metal bracket at its base which is then bolted ...REL33076