Filters
Collection
1368 Results
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Air filtration system.
Technology
Maker: Moore Products Co.
The air filtration system consists of three individual units joined together by copper pipes. The first unit is an air filter regulator, type 91F60/RH. Part of the label is obscured by a metal bracket...REL32981.034
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Alarm Panel and Horn
Technology
Maker: Federal Sign and Signal Corporation Wing Corporation
Alarm Panel and horn. The panel consists of is a grey rectangular metal case. At the back are two welded brackets drilled with three bolt holes. At the bottom are two cable fittings, the cover is reta...REL32981.036
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Dummy Log Speed Transmitter
Technology
Maker: Electric Tachometer Corp
The Dummy Log Speed Transmitter Type I consists of a rectangular cast case with a rectangular cover secured by four screws. At the rear of the unit is one cable fitting. In the upper part of the cover...REL32981.029
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body, and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-3000 PSIG. There is a red indicat...REL32981.020
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Moeller Instrument Co.
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-30. There is a red indicator ar...REL32981.013
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and an ochre front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-200 PSIG. There is a red line at...REL32981.016
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body and an orange front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-2000 PSIG. There is a red indica...REL32981.011
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-300 PSIG. There is a single black i...REL32981.019
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Ashcroft
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a red line at 12...REL32981.018
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-1000. There is a red line at 600, ...REL32981.015
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a single black in...REL32981.012
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-100. There is a red arrow at 74,...REL32981.014
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a white front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-600 PSIG. There is a red arrow at ...REL32981.017
-
HMAS Brisbane : Engine Room : Engine Order Indicator gauge
Technology
Maker: Sig-Trans Inc.
The engine order indicator gauge has a rectangular cover with six screw holes and an inset circular acrylic disc in the middle. Below the disc is a nomenclature plate that reads: Engine Order Equipmen...REL32981.022
-
HMAS Brisbane : Engine Room : Engine Order Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The engine order equipment indicator-transmitter consists of a cast alloy rectangular case, with a rectangular cover, secured by four screws. In the upper part of the cover is an acrylic disc, above a...REL32981.027
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body with a grey rim. The face is white and is protected by an acrylic Perspex disc, calibrated from 0-1000 PSIG. There is a red indicator line at 500. Nome...REL32981.007
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator Gauge
Technology
Maker: Unknown
The propeller revolution indicator gauge has a square cast alloy cover, with an inset circular acrylic disc in the middle. The cast alloy body of the unit is attached to the Engine Room gauge board. T...REL32981.024
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Electric Tachometer Corp
The propeller revolution indicator-transmitter consists of a rectangular case alloy case with rounded corners. There are cable access holes on the top and bottom of the unit. A cast alloy cover is att...REL32981.039
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The propeller revolution indicator/transmitter consists of a cast alloy body, painted grey. The front cover is a rectangular alloy sheet, secured by eight screws. On the cover of the unit are three in...REL32981.023
-
HMAS Brisbane : Engine Room : Rudder Angle Indicator
Technology
Maker: Sig-Trans Inc.
The rudder angle indicator has a rectangular cover with 5 screw holes and an inset circular acrylic disc in the middle. Above the disc is a black plaque reading RUDDER ANGLE IND. Below the disc is a n...REL32981.021
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Siren Type 1C/S2S
Technology
Maker: Federal Sign and Signal Corporation
The siren consists of a cylindrical cast alloy case and circular front cover with cut-outs. The circular cover also has `Federal Sign and Signal Corp ' Blue Island Illinois' engraved on the metal. The...REL32981.032
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001
-
HMAS Brisbane : Engine Room : Switch unit
Technology
Maker: Palmer Unknown
The brass switch consists of a pressed metal case with a single attachment bracket welded to the back and drilled for two bolt holes. There are two cable fittings in the side of the case. The face is ...REL32981.031
-
HMAS Brisbane : Engine Room : Tartar Missile Launch Magazine Plate
Technology
Maker: Unknown
The tarter missile launch plate is a rectangular alloy plate with printed instructions for procedures that should be followed in case of Harpoon Fuel Leakage. It also contains instructions for recomme...REL32981.008
-
HMAS Brisbane : Fencing and Cabling missile launch cap
Technology
Maker: Unknown
The fencing and cabling is made up of four 1420mm long and three 1115mm long grey metal poles. The poles are 50mm in diameter. Each pole is secured to a metal bracket at its base which is then bolted ...REL33076
-
HMAS Brisbane : Fire Extinguisher holder
Technology
Maker: Unknown
The fire extinguisher holder is rectangular at the back with angles sides and base. It is made of metal and painted red. It has a black belt with buckle connected to the left hand side, which is used ...REL32993
-
HMAS Brisbane : Flag Locker
Technology
Maker: Unknown
The flag locker consists of a rectangular alloy casing, made of riveted sheets attached to a welded alloy L channel frame. The top edge of the case is angled with the height of the unit rising toward ...REL33210
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'A for Alpha'
Technology
Maker: Harry West Flags
Standard forked flag used on the HMAS Brisbane. The background (field) is divided into two sections. The first third of the flag (from the hoist) is white, the remaining two thirds is blue. The flag r...REL33210.081
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'B for Bravo'
Technology
Maker: Harry West Flags
Standard forked flag used on the HMAS Brisbane. The background (field) is completely red. The flag represents the letter ‘B’ for Bravo, and also has the meaning ‘I am taking in or discharging explosiv...REL33210.083
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'Y for Yankee'
Technology
Maker: Pennant House
Standard rectangular flag used on the HMAS Brisbane. The background (field) consists of right to left diagonal stripes, that alternate between yellow and red. The flag represents the letter ‘Y’ for Ya...REL33210.126
-
HMAS Brisbane : Flag Locker : Alphabetical flag 'Z for Zulu'
Technology
Maker: Unknown
Standard rectangular flag used on the HMAS Brisbane. The background (field) is divided into four equal triangles. Clockwise, the colours are yellow, blue, red and black. The flag represents the letter...REL33210.128
-
HMAS Brisbane : Flag Locker : Flag 'Squadron'
Technology
Maker: ACRYLIC DOUBLET
Standard rectangular flag used on the HMAS Brisbane. The background (field) is divided into four equal squares. Clockwise they are yellow, red, white and blue. The flag represents 'Squadron'. Writte...REL33210.066
-
HMAS Brisbane : Flag Locker : 'Flotilla' Pennant
Technology
Maker: Harry West Flags
Standard forked pennant used on the HMAS Brisbane. The background (field) is blue with a large white stripe running horizontally across the middle of the flag. The flag represents 'Flotilla'. Attache...REL33210.078
-
HMAS Brisbane : Flag Locker : Numeral 1 Pennant
Technology
Standard triangular pennant flag used on the HMAS Brisbane. The flag has a white field (background) with red circle (charge) 30cm from the hoist. The flag represents the number 1. Written on the flag ...REL33210.001
-
HMAS Brisbane : Flag Locker : Numeral 8 Pennant
Technology
Maker: Harry West Flags
Standard triangular pennant flag used on the HMAS Brisbane. The background (field) is white, with a large red cross (charge) spanning the length of the flag. The flag represents the number 8. A tag a...REL33210.016
-
HMAS Brisbane : Flag Locker : Pennant 'Negative'
Technology
Maker: Harry West Flags
Standard triangular pennant used on the HMAS Brisbane. The background (field) is blue and yellow arranged in a chequered-pattern. The flag represents 'negative'. Attached to the hoist is a tag that r...REL33210.048
-
HMAS Brisbane : Flag Locker : 'Station' Pennant
Technology
Standard triangular pennant used on the HMAS Brisbane. The background (field) consists of a white triangle backing on to the hoist, with red edging on its remaining two sides. The flag represents 'St...REL33210.074
-
HMAS Brisbane : Flag Locker : 'Sub-Div' Pennant
Technology
Maker: Pennant House
Standard triangular pennant used on the HMAS Brisbane. The background (field) is entirely blue. The flag represents 'Sub-Div'. Attached to the hoist is a tag that reads: PENNANT HOUSE 197 Lake Stree...REL33210.079
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33070
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33069
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MIL-F-1637...REL33068
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MS17181-14...REL33071
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads: MS17181-14...REL33067
-
HMAS Brisbane : Fluorescent light
Technology
Maker: L. C Doane Co. L. C Doane Co.
Rectangular metal casing containing three fluorescent lights - two white and one red, protected by a molded white plastic cover. On the back of the light is a nomenclature plate that reads MIL-F-16377...REL33066
-
HMAS Brisbane : Foot switch
Technology
Maker: Unknown
Foot switch, made of metal, painted grey. The switchl is rectangular at the back and rounded at the front. The top section of the foot switchl is grooved for better grip. A power cable protrudes from ...REL32990
-
HMAS Brisbane : Foot switch
Technology
Maker: Dynell Electronics Corp
Foot switch, made of metal, painted grey. The switch is rectangular at the back and rounded at the front. The top section of the foot switch is grooved for better grip. A nomenclature plate on the rig...REL32991
-
HMAS Brisbane : Frame
Technology
Maker: Unknown
This frame is intended to be used with the Gun Plot Room door, but was collected from elsewhere in the ship. The door frame consists of a heavy L channel which is welded to the wall section. On the ch...REL32980.100
-
HMAS Brisbane : Gun Cleaning Brush (section of)
Technology
Maker: Unknown
The gun cleaning brush consists of a heavy alloy rod with a 10cm wide band of radial bristles. The centre of the rod is pierced and is fitted at each end with a section of threaded metal rod, projecti...REL32986
-
HMAS Brisbane : Gun Plot Room : Air Duct inspection cover and adjacent tally plate and bracket.
Technology
Maker: Unknown
The air duct inspection cover is a disc shaped assembly, fabricated from sheet alloy, with stamped sections welded as required and a central steel attachment point. The associated bracket/latch is a s...REL32980.021
-
HMAS Brisbane : Gun Plot Room : Air Filter
Technology
Maker: Unknown
The air filter is rectangular sheet metal case. The lid is made of L shaped channel and wire mesh and is retained by four screws. On the rear of the case is a circular hole with four screw holes and a...REL32980.048
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges, located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped end...REL32980.095
-
HMAS Brisbane : Gun Plot Room : Aluminium cover
Technology
Maker: Unknown
The cover is a rectangular alloy sheet with two folded edges located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped ends...REL32980.096
-
HMAS Brisbane : Gun Plot Room : Aluminium floor plate
Technology
Maker: Unknown
Rectangular alloy plate with a cut-out section on one corner. The panel has two irregular holes cut together with two drilled holes. This is believed to be a sample of floor panelling from the GPR. Th...REL32980.086
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 1 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.006
-
HMAS Brisbane : Gun Plot Room : Amplifier Mk 76 Mod 8,
Technology
Maker: Unknown
The Amplifier Mk 76 Mod 8 consists of 2 rectangular consoles placed side-by-side. This is console 2 of 2. The console consists of two cabinets, divided into top and bottom sections. On the top section...REL32980.007
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.088
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.089
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.090
-
HMAS Brisbane : Gun Plot Room : Bookshelf
Technology
Maker: Unknown
The shelf is constructed as an open-topped rectangular metal box. On the inside rear wall is a U channel for fitting a shelf divider. On the front face the end walls have folded edges and are about 1/...REL32980.091
-
HMAS Brisbane : Gun Plot Room : Box of brackets
Technology
Maker: Unknown
A rectangular, red plastic box filled with small brackets and screws, which have been painted white. The box has masking tape over the top upon which is hand-written `Cease Fire Salvo Signal Board'.REL32980.062
-
HMAS Brisbane : Gun Plot Room : Bracket
Technology
Maker: Unknown
The bracket is attached to the wall of the GPR, adjacent to the hull of the ship (opposite door). It consists of two rectangular steel plates welded at the rear to a Z shaped U section channel frame. ...REL32980.102
-
HMAS Brisbane : Gun Plot Room : Cable with plaited plastic covering.
Technology
Maker: Joslyn Sunbank Company LLC
The cable is covered with a finely woven acrylic cover, terminating in two large multi-pinned plugs. On one end of the cable is a large metal 31 pin socket. There is an adjustable metal rim around th...REL32980.077
-
HMAS Brisbane : Gun Plot Room : Cease Fire-CKT 2U
Technology
Maker: Unknown
The Cease Fire Circuit is a pressed brass case, circular in shape and has been painted dark blue. The top of the unit has a square brass panel attached. In the middle of the panel is a brass switch th...REL32980.066
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.081
-
HMAS Brisbane : Gun Plot Room : Chair
Technology
Maker: Unknown
The chair consists of a heavy tubular base terminating at the base in a square mounting bracket with four holes. Attached to the top of the base are two square metal plates incorporating a swivel mech...REL32980.082
-
HMAS Brisbane : Gun Plot Room : Computer Set Control Mk 167 Mod 3
Technology
Maker: Sperry Gyroscope Co
The Computer Set Control is a rectangular metal cabinet. Attached to the front is a set of three angled consoles mounted on a metal frame. The base of the middle console protrudes to make up a table. ...REL32980.005
-
HMAS Brisbane : Gun Plot Room : Control Panel Mk 146 Md 1
Technology
Maker: General Electric
The Control Panel Mk 146 Md 1 is located on the back wall of the gun plot room. It is a rectangular metal cabinet that has been painted grey. On the rear face of the cabinet are eight shock mountings ...REL32980.012
-
HMAS Brisbane : Gun Plot Room : Cover
Technology
Maker: Unknown
The cover is rectangular, made from a folded sheet of alloy, painted grey. It consists of a top and two sides. Each side has four holes for bolting them to the correct piece of equipment. On the top o...REL32980.093
-
HMAS Brisbane : Gun Plot Room : Cover panel
Technology
Maker: Unknown
The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in no partic...REL32980.103
-
HMAS Brisbane : Gun Plot Room : Cover panel
Technology
Maker: Unknown
The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in various l...REL32980.087
-
HMAS Brisbane : Gun Plot Room : Data Processing Set AN/UYK-20(V)
Technology
Maker: Sperry Sperry Univac
The front of the Data Processing Set (DPS) is a square metal unit with a right hinged door at the front, which is called the control monitor. A small control panel containing several switches and indi...REL32980.002
-
HMAS Brisbane : Gun Plot Room : Door
Technology
Maker: Overbeke-Kain Co.
The door from the gun plot room is a rectangular metal door with rounded corners. The front face is a pressed metal sheet. The top right hand corner has a diagonal section painted painted red, and the...REL32980.099
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Hose-McCann Telephone Co. Inc.
The electrical box has a pressed brass body with a square front plate. The plate is brass and provides mounting for two single-pin female electrical supply sockets, which have black plastic leashed (a...REL32980.038
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box consists of a pressed circular brass body, with circular front plate, both painted dark blue. The front plate has a centrally mounted female electrical socket with leashed cover. At...REL32980.068
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Hose-McCann Telephone Co. Inc.
The electrical box has a pressed brass body (painted dark blue) with a square front plate. The front plate is made of brass and provides mounting for two single-pin female electrical sockets. Both soc...REL32980.040
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32980.070
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box has a rectangular metal case with rounded corners, with a pressed metal convex lid. The entire box has been painted white. Around the edges of the box are 10 bolts. There are two, s...REL32980.076
-
HMAS Brisbane : Gun Plot Room : Electrical Box
Technology
Maker: Unknown
The electrical box is attached directly to the wall of the gun plot room. The box is a rectangular grey box, with a removable lid with three cable access points. There are four air-vents ' 2 on the ri...REL32980.013
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box has a pressed circular brass body with a circular front plate. The unit is partially painted dark blue. The front plate has a centrally mounted female electrical socket (cover missi...REL32994
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box consists of a pressed circular brass body, with circular front plate, both painted dark blue. The front plate has a centrally mounted female electrical socket with leashed cover. At...REL32995
-
HMAS Brisbane : Gun Plot Room : Electrical box
Technology
Maker: Unknown
The electrical box has a pressed brass body with a square front plate. The front plate is made brass and provides mounting for two single-pin female electrical sockets, both of which have a black leas...REL32980.039
-
HMAS Brisbane : Gun Plot Room : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32980.046