Filters
Filters (3 applied)
Clear All- type : Technology (remove)
- has image : yes (remove)
- related units : HMAS Brisbane (1967- 2001) (remove)
-
has sound (1)
-
has video (1)
-
Conflict (2)
-
location (1)
-
maker (66)
- Unknown (148)
- Dynalec Corporation (16)
- Stromberg Carlson (9)
- L. C Doane Co. (6)
- Weksler Instruments (6)
- Henschel Corporation (4)
- Hose-McCann Telephone Co. Inc. (4)
- Modern Metal MFG (4)
- Sig-Trans Inc. (4)
- Sperry Univac (4)
- Tabet Manufacturing Company, Inc. (4)
- Barry Controls (3)
- Electric Tachometer Corp (3)
- Jensen Manufacturing Co. (3)
- Moeller Instrument Co. (3)
- Sperry (3)
- Sperry Gyroscope Co (3)
- Turnbull Enterprises Inc (3)
- University Sound (3)
- 3D Instruments Inc (2)
- Barry Controls Incorporated (2)
- Bendix Corporation Friez Instrument Division (2)
- Betts & Betts (2)
- Comsaco Inc. (2)
- Dynell Electronics Corp (2)
- Electronic Research Associates, INC (2)
- Federal Sign and Signal Corporation (2)
- Francis and Sons (2)
- Hughes Aircraft Company (2)
- Palmer (2)
- Raytheon Company (2)
- Rob Ian Company (2)
- Similux (2)
- Sperry Piedmont Co (2)
- Stanlite Electronics Pty Ltd (2)
- United States Instrument Corp (2)
- University Loudspeakers (2)
- Ashcroft (1)
- Bendix (Pioneer Instrument Div) & Sprague Spec. Co (1)
- Chemical Industry Co. Ltd. (1)
- Clampo Products (1)
- DESCO (1)
- Defoe Shipbuilding Co (1)
- FMC Ordnance Division (1)
- Felsenthal Instruments Company (1)
- Francis Searchlights (1)
- General Electric (1)
- JTC (1)
- Joslyn Sunbank Company LLC (1)
- Marine Electric Corporation (1)
- Marine Instrument Co. (1)
- Moeller (1)
- Moore Products Co. (1)
- Overbeke-Kain Co. (1)
- Princo Instruments Inc. (1)
- Radio Engineering Products (1)
- Rascal Acoustics (1)
- Rois Manufacturing Company (1)
- S.H Couch Co Inc (1)
- Staedtler (1)
- Telectro Systems Corp (1)
- The Hygrographic Department of the Admiralty (1)
- The W. H Reisner MFG Co. (1)
- Tombow Pencil Company Limited (1)
- W&G (1)
- Wing Corporation (1)
Show More
Collection
286 Results
-
HMAS Brisbane : Combat Data Centre Ship's Status Plotting Board
Technology
Maker: Rois Manufacturing Company
The board consists of a rectangular alloy frame containing a clear acrylic sheet. The frame has a box section at the top and bottom. Each box section has six inset lamps to provide edge illumination f...REL32982.044
-
HMAS Brisbane : Combat Data Centre : Socket box
Technology
Maker: Unknown
The socket box consists of a rectangular cast metal case, painted grey. On the front is a cast cover panel secured by four screws. On the front of the panel is an embossed inscription which reads: `So...REL32982.031
-
HMAS Brisbane : Combat Data Centre : Sound Power Circuit Control Box
Technology
Maker: Unknown
The Sound Power Circuit Control Box is a square metal case, painted silver. On the back of the unit are two mounting holes, at the base are two cable clamps - approx 50cm of cable projects. The front ...REL32982.012
-
HMAS Brisbane : Combat Data Centre : Telephone assembly and hand-piece bracket
Technology
Maker: United States Instrument Corp
The assembly is a pressed metal rectangular case, painted grey. At the rear of the case are three welded mounting brackets, each drilled for a single bolt. There is a curved tubular pipe located on th...REL32982.018
-
HMAS Brisbane : Combat Data Centre : Telephone assembly and hand-piece bracket
Technology
Maker: Stromberg Carlson
The Assembly is a pressed metal rectangular case, painted grey. At the rear of the case are three welded mounting brackets, each drilled for a single bolt. A female electrical supply plug is fitted to...REL32982.017
-
HMAS Brisbane : Combat Data Centre : Telephone handset bracket
Technology
Maker: Unknown
The telephone handset bracket is made of two sections, the front is a pressed metal rectangular dish with rounded ends, partially cut away to allow the phone to be inserted. The rear section is anothe...REL32982.008
-
HMAS Brisbane : Combat Data Centre : Wind Direction and Speed Indicator Unit Type B (2of2)
Technology
Maker: Bendix Corporation Friez Instrument Division
The wind direction and speed indicator is a rectangular cast unit with rounded corners and three mounting points, two at the top rear edge and one in the centre of the lower rear edge. Adjacent to the...REL32982.005
-
HMAS Brisbane : Combat Data Centre : Wind Direction and Speed Indicator Unit Type B (1of 2)
Technology
Maker: Bendix (Pioneer Instrument Div) & Sprague Spec. Co Bendix Corporation Friez Instrument Division
The wind direction and speed indicator is a rectangular cast unit with rounded corners and three mounting points, two at the top rear edge and one in the centre of the lower rear edge. Adjacent to the...REL32982.004
-
HMAS Brisbane : Computer Set Control
Technology
Maker: Sperry Gyroscope Co
The Computer Set Control, Mk167 Mod3, is identical to that in the Gun Plot Room (Gun Plot document, #5). The Computer Set Control is a rectangular metal cabinet. Attached to the front is a set of thre...REL33080
-
HMAS Brisbane : Connector Box
Technology
Maker: Tabet Manufacturing Company, Inc.
The connector box is square in shape, made of brass and has three brackets attached to the back, one of which reads STRESS RELEIVED. There are no dials or switched on the console, although a nomenclat...REL33061
-
HMAS Brisbane : Door
Technology
Maker: Unknown
The door consists of two pressed metal panels secured to a welded frame. In the lower half of the door is a hinged access panel secured by two sliding bolts at the top. The door is painted light blue ...REL33090
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Air filtration system.
Technology
Maker: Moore Products Co.
The air filtration system consists of three individual units joined together by copper pipes. The first unit is an air filter regulator, type 91F60/RH. Part of the label is obscured by a metal bracket...REL32981.034
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Alarm Panel and Horn
Technology
Maker: Federal Sign and Signal Corporation Wing Corporation
Alarm Panel and horn. The panel consists of is a grey rectangular metal case. At the back are two welded brackets drilled with three bolt holes. At the bottom are two cable fittings, the cover is reta...REL32981.036
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Dummy Log Speed Transmitter
Technology
Maker: Electric Tachometer Corp
The Dummy Log Speed Transmitter Type I consists of a rectangular cast case with a rectangular cover secured by four screws. At the rear of the unit is one cable fitting. In the upper part of the cover...REL32981.029
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body, and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-3000 PSIG. There is a red indicat...REL32981.020
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Moeller Instrument Co.
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-30. There is a red indicator ar...REL32981.013
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and an ochre front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-200 PSIG. There is a red line at...REL32981.016
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body and an orange front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-2000 PSIG. There is a red indica...REL32981.011
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-300 PSIG. There is a single black i...REL32981.019
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Ashcroft
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a red line at 12...REL32981.018
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-1000. There is a red line at 600, ...REL32981.015
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a single black in...REL32981.012
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-100. There is a red arrow at 74,...REL32981.014
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a white front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-600 PSIG. There is a red arrow at ...REL32981.017
-
HMAS Brisbane : Engine Room : Engine Order Indicator gauge
Technology
Maker: Sig-Trans Inc.
The engine order indicator gauge has a rectangular cover with six screw holes and an inset circular acrylic disc in the middle. Below the disc is a nomenclature plate that reads: Engine Order Equipmen...REL32981.022
-
HMAS Brisbane : Engine Room : Engine Order Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The engine order equipment indicator-transmitter consists of a cast alloy rectangular case, with a rectangular cover, secured by four screws. In the upper part of the cover is an acrylic disc, above a...REL32981.027
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body with a grey rim. The face is white and is protected by an acrylic Perspex disc, calibrated from 0-1000 PSIG. There is a red indicator line at 500. Nome...REL32981.007
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Electric Tachometer Corp
The propeller revolution indicator-transmitter consists of a rectangular case alloy case with rounded corners. There are cable access holes on the top and bottom of the unit. A cast alloy cover is att...REL32981.039
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The propeller revolution indicator/transmitter consists of a cast alloy body, painted grey. The front cover is a rectangular alloy sheet, secured by eight screws. On the cover of the unit are three in...REL32981.023
-
HMAS Brisbane : Engine Room : Rudder Angle Indicator
Technology
Maker: Sig-Trans Inc.
The rudder angle indicator has a rectangular cover with 5 screw holes and an inset circular acrylic disc in the middle. Above the disc is a black plaque reading RUDDER ANGLE IND. Below the disc is a n...REL32981.021
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Siren Type 1C/S2S
Technology
Maker: Federal Sign and Signal Corporation
The siren consists of a cylindrical cast alloy case and circular front cover with cut-outs. The circular cover also has `Federal Sign and Signal Corp ' Blue Island Illinois' engraved on the metal. The...REL32981.032
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001