Filters
Collection
286 Results
-
HMAS Brisbane : Door
Technology
Maker: Unknown
The door consists of two pressed metal panels secured to a welded frame. In the lower half of the door is a hinged access panel secured by two sliding bolts at the top. The door is painted light blue ...REL33090
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Air filtration system.
Technology
Maker: Moore Products Co.
The air filtration system consists of three individual units joined together by copper pipes. The first unit is an air filter regulator, type 91F60/RH. Part of the label is obscured by a metal bracket...REL32981.034
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Alarm Panel and Horn
Technology
Maker: Federal Sign and Signal Corporation Wing Corporation
Alarm Panel and horn. The panel consists of is a grey rectangular metal case. At the back are two welded brackets drilled with three bolt holes. At the bottom are two cable fittings, the cover is reta...REL32981.036
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Dummy Log Speed Transmitter
Technology
Maker: Electric Tachometer Corp
The Dummy Log Speed Transmitter Type I consists of a rectangular cast case with a rectangular cover secured by four screws. At the rear of the unit is one cable fitting. In the upper part of the cover...REL32981.029
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body, and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-3000 PSIG. There is a red indicat...REL32981.020
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Moeller Instrument Co.
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-30. There is a red indicator ar...REL32981.013
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and an ochre front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-200 PSIG. There is a red line at...REL32981.016
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body and an orange front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-2000 PSIG. There is a red indica...REL32981.011
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-300 PSIG. There is a single black i...REL32981.019
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Ashcroft
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a red line at 12...REL32981.018
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-1000. There is a red line at 600, ...REL32981.015
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a single black in...REL32981.012