Filters
Filters (4 applied)
Clear All- has image : yes (remove)
- has sound : no (remove)
- related units : RAN Destroyers (remove)
- type : Technology (remove)
-
has video (1)
-
Conflict (2)
-
location (1)
-
maker (66)
- Unknown (148)
- Dynalec Corporation (16)
- Stromberg Carlson (9)
- L. C Doane Co. (6)
- Weksler Instruments (6)
- Henschel Corporation (4)
- Hose-McCann Telephone Co. Inc. (4)
- Modern Metal MFG (4)
- Sig-Trans Inc. (4)
- Sperry Univac (4)
- Tabet Manufacturing Company, Inc. (4)
- Barry Controls (3)
- Electric Tachometer Corp (3)
- Jensen Manufacturing Co. (3)
- Moeller Instrument Co. (3)
- Sperry (3)
- Sperry Gyroscope Co (3)
- Turnbull Enterprises Inc (3)
- University Sound (3)
- 3D Instruments Inc (2)
- Barry Controls Incorporated (2)
- Bendix Corporation Friez Instrument Division (2)
- Betts & Betts (2)
- Comsaco Inc. (2)
- Dynell Electronics Corp (2)
- Electronic Research Associates, INC (2)
- Federal Sign and Signal Corporation (2)
- Francis and Sons (2)
- Hughes Aircraft Company (2)
- Palmer (2)
- Raytheon Company (2)
- Rob Ian Company (2)
- Similux (2)
- Sperry Piedmont Co (2)
- Stanlite Electronics Pty Ltd (2)
- United States Instrument Corp (2)
- University Loudspeakers (2)
- Ashcroft (1)
- Bendix (Pioneer Instrument Div) & Sprague Spec. Co (1)
- Chemical Industry Co. Ltd. (1)
- Clampo Products (1)
- DESCO (1)
- Defoe Shipbuilding Co (1)
- FMC Ordnance Division (1)
- Felsenthal Instruments Company (1)
- Francis Searchlights (1)
- General Electric (1)
- JTC (1)
- Joslyn Sunbank Company LLC (1)
- Marine Electric Corporation (1)
- Marine Instrument Co. (1)
- Moeller (1)
- Moore Products Co. (1)
- Overbeke-Kain Co. (1)
- Princo Instruments Inc. (1)
- Radio Engineering Products (1)
- Rascal Acoustics (1)
- Rois Manufacturing Company (1)
- S.H Couch Co Inc (1)
- Staedtler (1)
- Telectro Systems Corp (1)
- The Hygrographic Department of the Admiralty (1)
- The W. H Reisner MFG Co. (1)
- Tombow Pencil Company Limited (1)
- W&G (1)
- Wing Corporation (1)
Show More
Collection
286 Results
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-100. There is a red arrow at 74,...REL32981.014
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a white front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-600 PSIG. There is a red arrow at ...REL32981.017
-
HMAS Brisbane : Engine Room : Engine Order Indicator gauge
Technology
Maker: Sig-Trans Inc.
The engine order indicator gauge has a rectangular cover with six screw holes and an inset circular acrylic disc in the middle. Below the disc is a nomenclature plate that reads: Engine Order Equipmen...REL32981.022
-
HMAS Brisbane : Engine Room : Engine Order Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The engine order equipment indicator-transmitter consists of a cast alloy rectangular case, with a rectangular cover, secured by four screws. In the upper part of the cover is an acrylic disc, above a...REL32981.027
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body with a grey rim. The face is white and is protected by an acrylic Perspex disc, calibrated from 0-1000 PSIG. There is a red indicator line at 500. Nome...REL32981.007
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Electric Tachometer Corp
The propeller revolution indicator-transmitter consists of a rectangular case alloy case with rounded corners. There are cable access holes on the top and bottom of the unit. A cast alloy cover is att...REL32981.039
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The propeller revolution indicator/transmitter consists of a cast alloy body, painted grey. The front cover is a rectangular alloy sheet, secured by eight screws. On the cover of the unit are three in...REL32981.023
-
HMAS Brisbane : Engine Room : Rudder Angle Indicator
Technology
Maker: Sig-Trans Inc.
The rudder angle indicator has a rectangular cover with 5 screw holes and an inset circular acrylic disc in the middle. Above the disc is a black plaque reading RUDDER ANGLE IND. Below the disc is a n...REL32981.021
-
HMAS Brisbane : Engine Room : Salinity Indicator
Technology
Maker: Marine Electric Corporation Unknown
The salinity indicator consists of a rectangular steel case. At the rear, four attachment brackets have been cut. A rectangular access panel was mounted on the bottom (missing). The cover is hinged on...REL32981.028
-
HMAS Brisbane : Engine Room : Siren Type 1C/S2S
Technology
Maker: Federal Sign and Signal Corporation
The siren consists of a cylindrical cast alloy case and circular front cover with cut-outs. The circular cover also has `Federal Sign and Signal Corp ' Blue Island Illinois' engraved on the metal. The...REL32981.032
-
HMAS Brisbane : Engine Room : Status Board No.1 Engine room
Technology
Maker: Unknown
The status board is located in the HMAS Brisbane Engine Room. The board is made up of a rectangular piece of wood, covered with a rectangular piece of white plastic, which is glued to the front. On th...REL32981.001