Filters
Collection
338 Results
-
HMAS Brisbane : Charge/Voltage indicator
Technology
Maker: Unknown
The charge/voltage indicator consists of a piece of flat rectangular metal, painted grey, with a clear plastic tube on the right hand side, held in place by two brackets. Written on the tube is `Maxim...REL32992
-
HMAS Brisbane : Chinagraph pencils (x9)
Technology
Maker: Staedtler Unknown
Nine packets of Chinagraph pencils. There are 10 pencils in each packet. The packets are green (x2), brown (x2), red (x2), white (x2), blue (x1).REL33030
-
HMAS Brisbane : Combat Data Centre : Amplifier
Technology
Maker: Radio Engineering Products
The amplifier consists of a rectangular metal case, painted grey. The front panel is an alloy sheet and is hinged along the front lower edge and is secured with two screws, one in each upper corner. O...REL32982.026
-
HMAS Brisbane : Combat Data Centre : Annunciator Type 1C/E4A
Technology
Maker: S.H Couch Co Inc
The Annunciator consists of a cast alloy rectangular body, with a rectangular front plate, painted grey. There are four mounting points, two on the left rear edge and two on the right rear edge. On th...REL32982.014
-
HMAS Brisbane : Combat Data Centre : Ceiling fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - two white and one infrared, protected by a moulded white plastic cover. There are four mounting points attached to the back of the unit. ...REL32982.006
-
HMAS Brisbane : Combat Data Centre : Chair
Technology
Maker: Turnbull Enterprises Inc
The chair consists of a cylindrical cast column base which mounts on a square floor plate (REL32982.002). The chair is attached to the plate using a pipe collar (REL32980.137). Above the column is a ...REL32982.001
-
HMAS Brisbane : Combat Data Centre : Chair base
Technology
Maker: Unknown
The base is fabricated from alloy sheet, is square in shape and is reinforced below with welded L channel. In the middle of the top surface is a raised circular section into which the base pole of the...REL32982.002
-
HMAS Brisbane : Combat Data Centre : Control Module VCS 945C
Technology
Maker: Stanlite Electronics Pty Ltd
The Control Module is housed in a rectangular metal case. The front of the unit is a square metal plate painted grey and secured by four screws (3 fitted). On this is mounted at the top a moulded plas...REL32982.007
-
HMAS Brisbane : Combat Data Centre : Dark Blue nylon/plastic material.
Technology
Maker: Unknown
Section of dark blue nylon/plastic material used to cover seats etc. There are several meters of material, which was given to the AWM as a spare. (PROP MATERIAL)REL32982.041
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with bracket
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.010
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with cable
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.009
-
HMAS Brisbane : Combat Data Centre : Fluorescent light
Technology
Maker: Unknown
The fluorescent light has a rectangular metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the middle a...REL32982.003
-
HMAS Brisbane : Combat Data Centre : Intercommunication Station (Intercom system interface).
Technology
Maker: Hughes Aircraft Company
The Intercommunication Station is a large metal rectangular box painted grey. On the front panel of the unit is a variety of dials, switches and indicator lights. On the right and left side is a silve...REL32982.038
-
HMAS Brisbane : Combat Data Centre : Intercommunication station with cables.
Technology
Maker: Unknown
The intercommunication station consists of a rectangular cast metal case, painted grey, with a cast lid, secured by four screws. On the top of the unit are two exit points for cables (unused). On the ...REL32982.030
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.019
-
HMAS Brisbane : Combat Data Centre : Lamp fitting
Technology
Maker: Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, two oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the base is a ...REL32982.028
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.020
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top of t...REL32982.021
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Unknown
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, two oval mounting brackets are riveted to the back of each. At the lower rear edge is a plated metal f...REL32982.027
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Modern Metal MFG
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, three oval mounting brackets are riveted to the back of each. At the lower rear edges is a plated meta...REL32982.022