Filters
Filters (3 applied)
Clear All-
has sound (1)
-
Conflict (2)
-
location (1)
-
maker (67)
- Unknown (152)
- Dynalec Corporation (16)
- Stromberg Carlson (9)
- L. C Doane Co. (6)
- Weksler Instruments (6)
- Henschel Corporation (4)
- Hose-McCann Telephone Co. Inc. (4)
- Modern Metal MFG (4)
- Sig-Trans Inc. (4)
- Sperry Univac (4)
- Tabet Manufacturing Company, Inc. (4)
- Barry Controls (3)
- Electric Tachometer Corp (3)
- Jensen Manufacturing Co. (3)
- Moeller Instrument Co. (3)
- Sperry (3)
- Sperry Gyroscope Co (3)
- Turnbull Enterprises Inc (3)
- University Loudspeakers (3)
- University Sound (3)
- 3D Instruments Inc (2)
- Barry Controls Incorporated (2)
- Bendix Corporation Friez Instrument Division (2)
- Betts & Betts (2)
- Comsaco Inc. (2)
- Defoe Shipbuilding Co (2)
- Dynell Electronics Corp (2)
- Electronic Research Associates, INC (2)
- Federal Sign and Signal Corporation (2)
- Francis and Sons (2)
- Hughes Aircraft Company (2)
- Palmer (2)
- Raytheon Company (2)
- Rob Ian Company (2)
- Similux (2)
- Sperry Piedmont Co (2)
- Stanlite Electronics Pty Ltd (2)
- United States Instrument Corp (2)
- Ashcroft (1)
- Baldwin-Lima-Hamilton Corp. (1)
- Bendix (Pioneer Instrument Div) & Sprague Spec. Co (1)
- Chemical Industry Co. Ltd. (1)
- Clampo Products (1)
- DESCO (1)
- FMC Ordnance Division (1)
- Felsenthal Instruments Company (1)
- Francis Searchlights (1)
- General Electric (1)
- JTC (1)
- Joslyn Sunbank Company LLC (1)
- Marine Electric Corporation (1)
- Marine Instrument Co. (1)
- Moeller (1)
- Moore Products Co. (1)
- Overbeke-Kain Co. (1)
- Princo Instruments Inc. (1)
- Radio Engineering Products (1)
- Rascal Acoustics (1)
- Rois Manufacturing Company (1)
- S.H Couch Co Inc (1)
- Staedtler (1)
- Telectro Systems Corp (1)
- The Hygrographic Department of the Admiralty (1)
- The W. H Reisner MFG Co. (1)
- Tombow Pencil Company Limited (1)
- W&G (1)
- Wing Corporation (1)
Show More
Collection
293 Results
-
HMAS Brisbane : Propeller : Propeller
Technology
Maker: Baldwin-Lima-Hamilton Corp.
The propeller is a one piece cast bronze unit with four blades attached to a tapered cylindrical centre. The internal diameter of the centre shaft is 37cm in diameter and has two machined grooves at t...REL32984.001
-
HMAS Brisbane : Propeller : Propeller Fairing
Technology
Maker: Unknown
The propeller fairing is cone-shaped, cast in metal. There are twelve pockets around the base of the fairing which provide access to twelve bolts (only six fitted) that attach the fairing to the main ...REL32984.002
-
HMAS Brisbane : Propeller : Propeller nut
Technology
Maker: Unknown
Cylindrical metal nut used to connect the propeller to the fairing. The nut is heavily rusted. This nut retains the propeller on the propeller shaft. There are seven 55mm wide slots arranged around th...REL32984.005
-
HMAS Brisbane : Push button box
Technology
Maker: Comsaco Inc.
The push button box consists of a cylindrical pressed metal body with two flat sides. At the back is a single welded bracket with two bolt holes. The bracket reads STRESS RELIEVED. The cover is circul...REL33056
-
HMAS Brisbane : Push button box (button missing)
Technology
Maker: Comsaco Inc.
The push button box consists of a cylindrical pressed metal body with two flat sides. At the back is a single welded bracket with two bolt holes. The bracket reads STRESS RELIEVED. The cover is circul...REL33057
-
HMAS Brisbane : Push button box (no cover)
Technology
Maker: Unknown
The back of the single push-button switch console is circular in shape, and made of brass. There is a single bracket attached to the back of the switch with STRESS RELIEVED printed on it.REL33058
-
HMAS Brisbane : RAAF Aircrew Checklist Book
Technology
Maker: Unknown
The RAAF Aircrew Checklist Book is A5 in size, and has a blue vinyl cover and back. The words `RAAF Aircrew Checklist' are written in gold on the front cover, as well as A276 Rev.77 Stock No. 7510'66-...REL33029
-
HMAS Brisbane : Rope
Technology
Maker: Unknown
Three-strand natural fibre rope with loop on end.REL33020
-
HMAS Brisbane : Rope
Technology
Maker: Unknown
Section of brown rope from the HMAS Brisbane with a karabiner attached to the end. The rope is made of synthetic fibres.REL33019
-
HMAS Brisbane : Seat
Technology
Maker: Unknown
The seat consists of a shaped seat pan, with grey cloth padding. This is attached to a U shaped bracket, which connects to a rectangular back plate via two pivot points and a locking arm. On the back ...REL33085
-
HMAS Brisbane : Seat Bracket
Technology
Maker: Unknown
Heavy plate bracket, rectangular in shape with two rectangular sections machined from one end. It is used in associated with the Observer's Seat (REL33085). Mounted on the plate at this end is an adju...REL33086
-
HMAS Brisbane : Selector box (front panel only)
Technology
Maker: United States Instrument Corp
The selector box front panel is rectangular, is made of pressed metal, with a hole in each corner. The unit has been painted grey. Mounted on the front of the cover is a rotating selector dial with a ...REL33021
-
HMAS Brisbane : Set of black metal brackets
Technology
Maker: Unknown
The two brackets are made from a metal L section with a folded tab at each end. The tabs are drilled with for a mounting bolt (bolt fitted). The brackets appear to be a `stay' bracket for a piece of e...REL32988
-
HMAS Brisbane : Ships Course Indicator
Technology
Maker: Sperry Piedmont Co
The Ships Course Indicator consists of a heavy cast base, a gimbal mounting attached to the top of the base and the repeater compass. The top of the indicator is heavy glass, underneath this viewing f...REL33077
-
HMAS Brisbane : Signaling Projector
Technology
Maker: Francis Searchlights
The signaling projector consists of cylindrical lamp-housing with cast and machined front and back plates. The body is supported in a large `Y' shaped bracket, which is in turn attached to an adjustab...REL32985
-
HMAS Brisbane : Signal Lantern
Technology
Maker: Francis and Sons
The signal lantern is an Admiralty Pattern 16466 Heather Mk II design, Serial No. 399. The lantern is small black unit, with a six-sided body with hinged cover and a cylindrical lamp attachment. Insid...REL32981.025
-
HMAS Brisbane : Signal Lantern
Technology
Maker: Francis and Sons
The signal lantern is small black unit, with a six-sided body with hinged cover and a cylindrical lamp attachment. Inside the cover is a plate reading: Admiralty PATT 16466, Heather Mk. 11. SIG. LANTE...REL32981.026
-
HMAS Brisbane : Single Microphone mouthpiece and cord.
Technology
Maker: Dynalec Corporation
The microphone unit consists of a tear-shaped black bakelite body, fitted with a microphone and operating switch. The switch is a black rectangular button mounted on top of the unit, the microphone is...REL32996
-
HMAS Brisbane : Single Microphone mouthpiece and cord.
Technology
Maker: Dynalec Corporation
The microphone unit consists of a tear-shaped black bakelite body, fitted with a microphone and operating switch. The switch is a black rectangular button mounted on top of the unit. The microphone is...REL33046
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33053
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33052
-
HMAS Brisbane : Socket box
Technology
Maker: Tabet Manufacturing Company, Inc.
The switch consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes, also written on the bracket is STRESS RELIEVED. The cover is square and is secured by four sc...REL33049
-
HMAS Brisbane : Socket box
Technology
Maker: Tabet Manufacturing Company, Inc.
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Attached to the front plate is a recta...REL33048
-
HMAS Brisbane : Socket Box
Technology
Maker: Hose-McCann Telephone Co. Inc.
The socket box consists of a multi-sided brass body and cover. The cover is square and is secured by four screws. Attached to the front plate is a rectangular frame with a white plastic card inserted....REL33060
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the cover and body have been pain...REL33051
-
HMAS Brisbane : Socket box (cover only)
Technology
Maker: Tabet Manufacturing Company, Inc.
The socket box cover is square in shape and made of brass. The cover is square and is secured by four screws. Attached to the front plate is a rectangular frame with a white plastic card inserted. Bel...REL33050
-
HMAS Brisbane : Spare Target Designation Transmitter (TDT) bellows.
Technology
Maker: Unknown
The spare TDT boot is made of grey rubber and is a concertina structure. It sits between the upper and lower sections of the TDT and maintains waterproof capability. The diameter of the TDT is 15cm.REL32987
-
HMAS Brisbane : Star Finder and Identifier
Technology
Maker: Similux
The star finder and identifier set is contained within a black vinyl slip-case with a single clip at the top. The set consists of eleven circular templates, including nine altitude-azimuth templates (...REL33033
-
HMAS Brisbane : Star Finder and Identifier
Technology
Maker: Similux
The star finder and identifier set is contained within a black vinyl slip-case with a single clip at the top. The set consists of eleven circular templates, including nine altitude-azimuth templates (...REL33034
-
HMAS Brisbane : Star Finder and Identifier
Technology
Maker: The Hygrographic Department of the Admiralty
The Star Finder and Identifier N.P 323 set consists of a square cardboard slip cover and square star chart (labeled N.P.323), (Northern and Southern Hemispheres) and eight transparent square templates...REL33036
-
HMAS Brisbane : Step
Technology
Maker: Unknown
The step consists of a single rectangular steel plate with folded edges and s non-slip paint surface. It is attached to a wedge shaped welded bracket. This in turn bolts to a heavy rod with a right an...REL33087
-
HMAS Brisbane : Steps
Technology
Maker: Unknown
Set of three steps, consisting of two U shaped side channels and three pre-fabricated cast alloy tread, each fitted with four non-slip strips. Each tread is secured by two bolts, at the top of each si...REL33084
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33042
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33041
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided brass body, with three brackets welded to the back, each with a single bolt hole. There are two electrical outlets on the side of the body. The cover is square and...REL33047
-
HMAS Brisbane : Tarpaulin
Technology
Maker: Unknown
Green acrylic patterned fabric tarpaulin, with reinforced edge and brass eyelets. Spacing between eyelets is 250mm.REL32980.085
-
HMAS Brisbane : Three arm Protractor
Technology
Maker: Marine Instrument Co.
The three arm protractor is a clear plastic unit, shaped like an paddle, with two movable `arms' attached, which assist with correct measurements. The two arms each have a small black circular handle....REL33038
-
HMAS Brisbane : Unknown box
Technology
Maker: Unknown
The unit consists of a pressed brass case, circular in shape. At the back of the box is a single welded bracket with two bolt holes. The bracket reads STRESS RELIEVED. The front of the unit is a press...REL33059
-
HMAS Brisbane : Unknown component
Technology
Maker: Unknown
The component consists of a varnished timber rod. At one end is a brass sleeve, with an inset spring and threaded adjustable ring. Inset at the end is a shaft with notches to allow a locating pin to b...REL33088
-
HMAS Brisbane : Unknown Unit
Technology
Maker: Unknown
The unit has no tag or identifying mark. The unit consists of two heavy steel rods, the tops of which are joined by a metal bracket. The lower half of the rods is enclosed in two cast metal tubes, whi...REL33074
-
HMAS Brisbane : Warning Stickers (Set of three)
Technology
Maker: Chemical Industry Co. Ltd.
Set of three warning stickers. The stickers are rectangular, with a bright yellow background and black writing. On the left of the sticker is a triangle with a radiation symbol in the middle. On the r...REL33032
-
HMAS Brisbane : 'W&G Douglas' Combined Protractor and Parallel Rule
Technology
Maker: W&G
'W&G 'Douglas' Combined Protractor and Parallel Rule is a square, see-through piece of plastic with combined protractor and parallel lines drawn on it. The square also has `Blundell Harling England', ...REL33037
-
HMAS Brisbane : Wooden Box
Technology
Maker: Unknown
The box is of timber construction, is rectangular and has a rectangular wooden lid. The lid is secured by screws. The box is mustard in colour.REL33092