Filters
Filters (5 applied)
Clear All- has sound : no (remove)
- has video : no (remove)
- type : Technology (remove)
- maker : Unknown (remove)
- related units : Royal Australian Navy (remove)
-
Conflict (7)
-
related places (7)
Collection
159 Results
-
HMAS Brisbane : Set of black metal brackets
Technology
Maker: Unknown
The two brackets are made from a metal L section with a folded tab at each end. The tabs are drilled with for a mounting bolt (bolt fitted). The brackets appear to be a `stay' bracket for a piece of e...REL32988
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33053
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the body and cover have been pain...REL33052
-
HMAS Brisbane : Socket box
Technology
Maker: Unknown
The socket box consists of a multi-sided brass body, with one bracket welded to the back, with two bolt holes. The cover is square and is secured by four screws. Both the cover and body have been pain...REL33051
-
HMAS Brisbane : Spare Target Designation Transmitter (TDT) bellows.
Technology
Maker: Unknown
The spare TDT boot is made of grey rubber and is a concertina structure. It sits between the upper and lower sections of the TDT and maintains waterproof capability. The diameter of the TDT is 15cm.REL32987
-
HMAS Brisbane : Step
Technology
Maker: Unknown
The step consists of a single rectangular steel plate with folded edges and s non-slip paint surface. It is attached to a wedge shaped welded bracket. This in turn bolts to a heavy rod with a right an...REL33087
-
HMAS Brisbane : Steps
Technology
Maker: Unknown
Set of three steps, consisting of two U shaped side channels and three pre-fabricated cast alloy tread, each fitted with four non-slip strips. Each tread is secured by two bolts, at the top of each si...REL33084
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33042
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided pressed metal body, with a circular brass lid, painted gold. Attached to the back of the body are three brackets, each with one bolt hole. Attached to the front of...REL33041
-
HMAS Brisbane : Switch
Technology
Maker: Unknown
The switch consists of a multi-sided brass body, with three brackets welded to the back, each with a single bolt hole. There are two electrical outlets on the side of the body. The cover is square and...REL33047
-
HMAS Brisbane : Tarpaulin
Technology
Maker: Unknown
Green acrylic patterned fabric tarpaulin, with reinforced edge and brass eyelets. Spacing between eyelets is 250mm.REL32980.085
-
HMAS Brisbane : Unknown box
Technology
Maker: Unknown
The unit consists of a pressed brass case, circular in shape. At the back of the box is a single welded bracket with two bolt holes. The bracket reads STRESS RELIEVED. The front of the unit is a press...REL33059
-
HMAS Brisbane : Unknown component
Technology
Maker: Unknown
The component consists of a varnished timber rod. At one end is a brass sleeve, with an inset spring and threaded adjustable ring. Inset at the end is a shaft with notches to allow a locating pin to b...REL33088
-
HMAS Brisbane : Unknown Unit
Technology
Maker: Unknown
The unit has no tag or identifying mark. The unit consists of two heavy steel rods, the tops of which are joined by a metal bracket. The lower half of the rods is enclosed in two cast metal tubes, whi...REL33074
-
HMAS Brisbane : Wooden Box
Technology
Maker: Unknown
The box is of timber construction, is rectangular and has a rectangular wooden lid. The lid is secured by screws. The box is mustard in colour.REL33092
-
Knife and scabbard : Chief Petty Officer Buckingham, HMAS Manoora
Technology
Maker: Unknown
Double edged 'buck' style knife with black plastic checkered grips and an imitation black leather scabbard that has a securing strap around the handle. A white nylon lanyard measuring 192mm is attach...REL33696.001
-
Kukri knife presented to Petty Officer J A Draper by Lance Corporal R Limbu, VC, 2/10 Princess Mary's Own Gurkha Rifles
Technology
Maker: Unknown
Traditional Gurkha kukri knife with heavy inwardly curved single-fullered steel blade with the traditional kauda notch at the base. The formed horn handle has a simple raised band design cut into the ...REL42502
-
Light : HMAS Quiberon
Technology
Maker: Unknown
Brass light from the Q class destroyer HMAS Quiberon. The light was screwed onto one of Quiberon's four 4.7 inch QF MkIX guns to illuminate a central dial. The light is cylindrical in shape with a 10m...REL34530
-
Limpet Mine Mk 1
Technology
Maker: Unknown
Mk 1 Limpet mine made from metal. The mine has six horseshoe magnets attached to the charge and a rope carry handle. There are no markings.REL/19386.001