Filters
Filters (3 applied)
Clear All-
type (2)
-
has sound (1)
-
has video (1)
-
Conflict (4)
-
related places (4)
Collection
152 Results
-
HMAS Brisbane : Combat Data Centre : Red Warning Light
Technology
Maker: Unknown
The red warning light consists of a cylindrical pressed metal body, with a mounting bracket secured to the back. The bracket is rectangular and has two holes. The circular front of the unit is made of...REL32982.011
-
HMAS Brisbane : Combat Data Centre : Remote Chain Selector Unit
Technology
Maker: Unknown
The Remote Chain Selector Unit is a rectangular metal case, with two L shaped metal brackets attached to the rear left and right edges. Each bracket has two bolt holes. On the top of the unit is a rec...REL32982.013
-
HMAS Brisbane : Combat Data Centre : Socket box
Technology
Maker: Unknown
The socket box consists of a rectangular cast metal case, painted grey. On the front is a cast cover panel secured by four screws. On the front of the panel is an embossed inscription which reads: `So...REL32982.031
-
HMAS Brisbane : Combat Data Centre : Sound Power Circuit Control Box
Technology
Maker: Unknown
The Sound Power Circuit Control Box is a square metal case, painted silver. On the back of the unit are two mounting holes, at the base are two cable clamps - approx 50cm of cable projects. The front ...REL32982.012
-
HMAS Brisbane : Combat Data Centre : Telephone handset bracket
Technology
Maker: Unknown
The telephone handset bracket is made of two sections, the front is a pressed metal rectangular dish with rounded ends, partially cut away to allow the phone to be inserted. The rear section is anothe...REL32982.008
-
HMAS Brisbane : Door
Technology
Maker: Unknown
The door consists of two pressed metal panels secured to a welded frame. In the lower half of the door is a hinged access panel secured by two sliding bolts at the top. The door is painted light blue ...REL33090
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042