Filters
Filters (2 applied)
Clear All-
has sound (1)
-
has video (1)
-
Conflict (2)
-
location (1)
-
maker (67)
- Unknown (152)
- Dynalec Corporation (16)
- Stromberg Carlson (9)
- L. C Doane Co. (6)
- Weksler Instruments (6)
- Henschel Corporation (4)
- Hose-McCann Telephone Co. Inc. (4)
- Modern Metal MFG (4)
- Sig-Trans Inc. (4)
- Sperry Univac (4)
- Tabet Manufacturing Company, Inc. (4)
- Barry Controls (3)
- Electric Tachometer Corp (3)
- Jensen Manufacturing Co. (3)
- Moeller Instrument Co. (3)
- Sperry (3)
- Sperry Gyroscope Co (3)
- Turnbull Enterprises Inc (3)
- University Loudspeakers (3)
- University Sound (3)
- 3D Instruments Inc (2)
- Barry Controls Incorporated (2)
- Bendix Corporation Friez Instrument Division (2)
- Betts & Betts (2)
- Comsaco Inc. (2)
- Defoe Shipbuilding Co (2)
- Dynell Electronics Corp (2)
- Electronic Research Associates, INC (2)
- Federal Sign and Signal Corporation (2)
- Francis and Sons (2)
- Hughes Aircraft Company (2)
- Palmer (2)
- Raytheon Company (2)
- Rob Ian Company (2)
- Similux (2)
- Sperry Piedmont Co (2)
- Stanlite Electronics Pty Ltd (2)
- United States Instrument Corp (2)
- Ashcroft (1)
- Baldwin-Lima-Hamilton Corp. (1)
- Bendix (Pioneer Instrument Div) & Sprague Spec. Co (1)
- Chemical Industry Co. Ltd. (1)
- Clampo Products (1)
- DESCO (1)
- FMC Ordnance Division (1)
- Felsenthal Instruments Company (1)
- Francis Searchlights (1)
- General Electric (1)
- JTC (1)
- Joslyn Sunbank Company LLC (1)
- Marine Electric Corporation (1)
- Marine Instrument Co. (1)
- Moeller (1)
- Moore Products Co. (1)
- Overbeke-Kain Co. (1)
- Princo Instruments Inc. (1)
- Radio Engineering Products (1)
- Rascal Acoustics (1)
- Rois Manufacturing Company (1)
- S.H Couch Co Inc (1)
- Staedtler (1)
- Telectro Systems Corp (1)
- The Hygrographic Department of the Admiralty (1)
- The W. H Reisner MFG Co. (1)
- Tombow Pencil Company Limited (1)
- W&G (1)
- Wing Corporation (1)
Show More
Collection
293 Results
-
Captain's chair: HMAS Brisbane bridge
Technology
Maker: Unknown
The chair has a metal base and frame, the seat is upholstered in leather and consists of seat cushion and adjustable back and head- rest. The seat is a Holden Special Vehicle type, with the Holden HSV...REL32979.009
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
Aerial mast base. This base is used in conjunction with the nine Aerial Mast components (REL33079) The base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fit...REL33078
-
HMAS Brisbane : Aerial mast components
Technology
Maker: Unknown
Nine (9) sections of aerial mast component, of different width and length. These components are used in conjunction with the four Aerial Mast bases (REL33078) Some of the sections (5) are covered with...REL33079
-
HMAS Brisbane : Anchor
Technology
Maker: Unknown
The anchor consists of two sections, the first is a cast steel shank with square cross section. At the uppermost part is a single steel pivot channel for connection to the anchor chain. At the base of...REL33094
-
HMAS Brisbane : Bell
Technology
Maker: Unknown
The bell consists of a triangular cast body with a plated finish. The bell is partially cut away at the top, and there is a square hole cut from the upper half of the unit. At the top of the bell are ...REL32998
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Henschel Corporation
The bell unit consists of a pressed metal body with a cover, to which is attached the bell. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. Printed on ...REL33040
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Henschel Corporation
The bell unit consists of a pressed metal body with a cover, to which is attached the bell. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. The cover i...REL33039
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Unknown
The bell unit consists of a pressed metal body, although the cover is missing. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. Printed on one of the br...REL33065
-
HMAS Brisbane : Bell Type IC/B1S4 and cover assembly
Technology
Maker: Hose-McCann Telephone Co. Inc.
The unit consists of a circular cover, secured by four screws (missing). The casing of the bell is missing. On the cover is a striker and a post mount for the bell, the bell is brass and attached with...REL33044
-
HMAS Brisbane : Box
Technology
Maker: Unknown
Metal box fabricated from riveted sheet alloy, with a single hinged door hinged on the right hand side with a latch on the left side. The interior of the box is divided into four equal compartments. T...REL32997
-
HMAS Brisbane : Box of sample cables
Technology
Maker: Unknown
Sample of cables of varying lengths, thickness and use.REL33091
-
HMAS Brisbane: Bridge
Technology
Maker: Defoe Shipbuilding Co
Bridge from the HMAS Brisbane. The bridge unit consists of an irregular 10-sided room, made of sheet alloy 7mm thick (approx). The front of the bridge has 13 square Perspex windows. On the left and ri...REL32979.001
-
HMAS Brisbane : Bridge : R.E.R. Hatch Rubbers
Technology
Maker: Defoe Shipbuilding Co
R.E.R. Hatch Rubbers from the Bridge of HMAS Brisbane. There are two lengths of rubber seal. One length is approximately 4 metres long. The other length is approximately 3 metres long. Both rubbers...REL32979.080
-
HMAS Brisbane : Bus Failure Alarm Signal Unit
Technology
Maker: Henschel Corporation
The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left...REL33054
-
HMAS Brisbane : Bus Failure Alarm Signal Unit
Technology
Maker: Henschel Corporation
The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left...REL33055
-
HMAS Brisbane : Cell Location plate
Technology
Maker: Unknown
The plate is rectangular, made of polished stainless steel and has five holes around the edges for bolting it to the relevant equipment. Engraved on the plate is CELL LOCATION, and then Cell No.1 ' Ce...REL33073
-
HMAS Brisbane : Charge/Voltage indicator
Technology
Maker: Unknown
The charge/voltage indicator consists of a piece of flat rectangular metal, painted grey, with a clear plastic tube on the right hand side, held in place by two brackets. Written on the tube is `Maxim...REL32992
-
HMAS Brisbane : Chinagraph pencils (x9)
Technology
Maker: Staedtler Unknown
Nine packets of Chinagraph pencils. There are 10 pencils in each packet. The packets are green (x2), brown (x2), red (x2), white (x2), blue (x1).REL33030
-
HMAS Brisbane : Combat Data Centre : Amplifier
Technology
Maker: Radio Engineering Products
The amplifier consists of a rectangular metal case, painted grey. The front panel is an alloy sheet and is hinged along the front lower edge and is secured with two screws, one in each upper corner. O...REL32982.026
-
HMAS Brisbane : Combat Data Centre : Annunciator Type 1C/E4A
Technology
Maker: S.H Couch Co Inc
The Annunciator consists of a cast alloy rectangular body, with a rectangular front plate, painted grey. There are four mounting points, two on the left rear edge and two on the right rear edge. On th...REL32982.014
-
HMAS Brisbane : Combat Data Centre : Ceiling fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - two white and one infrared, protected by a moulded white plastic cover. There are four mounting points attached to the back of the unit. ...REL32982.006
-
HMAS Brisbane : Combat Data Centre : Chair
Technology
Maker: Turnbull Enterprises Inc
The chair consists of a cylindrical cast column base which mounts on a square floor plate (REL32982.002). The chair is attached to the plate using a pipe collar (REL32980.137). Above the column is a ...REL32982.001
-
HMAS Brisbane : Combat Data Centre : Chair base
Technology
Maker: Unknown
The base is fabricated from alloy sheet, is square in shape and is reinforced below with welded L channel. In the middle of the top surface is a raised circular section into which the base pole of the...REL32982.002
-
HMAS Brisbane : Combat Data Centre : Control Module VCS 945C
Technology
Maker: Stanlite Electronics Pty Ltd
The Control Module is housed in a rectangular metal case. The front of the unit is a square metal plate painted grey and secured by four screws (3 fitted). On this is mounted at the top a moulded plas...REL32982.007
-
HMAS Brisbane : Combat Data Centre : Dark Blue nylon/plastic material.
Technology
Maker: Unknown
Section of dark blue nylon/plastic material used to cover seats etc. There are several meters of material, which was given to the AWM as a spare. (PROP MATERIAL)REL32982.041
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with bracket
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.010
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with cable
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.009
-
HMAS Brisbane : Combat Data Centre : Fluorescent light
Technology
Maker: Unknown
The fluorescent light has a rectangular metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the middle a...REL32982.003
-
HMAS Brisbane : Combat Data Centre : Intercommunication Station (Intercom system interface).
Technology
Maker: Hughes Aircraft Company
The Intercommunication Station is a large metal rectangular box painted grey. On the front panel of the unit is a variety of dials, switches and indicator lights. On the right and left side is a silve...REL32982.038
-
HMAS Brisbane : Combat Data Centre : Intercommunication station with cables.
Technology
Maker: Unknown
The intercommunication station consists of a rectangular cast metal case, painted grey, with a cast lid, secured by four screws. On the top of the unit are two exit points for cables (unused). On the ...REL32982.030
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.019
-
HMAS Brisbane : Combat Data Centre : Lamp fitting
Technology
Maker: Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, two oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the base is a ...REL32982.028
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.020
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top of t...REL32982.021
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Unknown
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, two oval mounting brackets are riveted to the back of each. At the lower rear edge is a plated metal f...REL32982.027
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Modern Metal MFG
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, three oval mounting brackets are riveted to the back of each. At the lower rear edges is a plated meta...REL32982.022
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.024
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.025
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Electronic Research Associates, INC
Loudspeaker in rectangular metal case with rounded corners at the top. The front panel is a flat alloy sheet with a circular cut-out for the speaker. Below is a small knob to increase volume (knob mis...REL32982.023
-
HMAS Brisbane : Combat Data Centre : Loudspeaker, P.M Type 49546
Technology
Maker: University Sound
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take three bolts. On ...REL32982.016
-
HMAS Brisbane : Combat Data Centre : Loudspeaker type 49546
Technology
Maker: University Loudspeakers
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.036
-
HMAS Brisbane : Combat Data Centre : Loudspeaker Type 49546
Technology
Maker: University Loudspeakers
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.032
-
HMAS Brisbane : Combat Data Centre : Loudspeaker type 49546
Technology
Maker: Telectro Systems Corp
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.037
-
HMAS Brisbane : Combat Data Centre : Loudspeaker Type 49646
Technology
Maker: University Sound
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.033
-
HMAS Brisbane : Combat Data Centre : Loudspeaker Type 49646
Technology
Maker: University Sound
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.034
-
HMAS Brisbane : Combat Data Centre : Loudspeaker Type CUL-49546
Technology
Maker: University Loudspeakers
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.015
-
HMAS Brisbane : Combat Data Centre : Panel with equipment
Technology
Maker: Electric Tachometer Corp
The panel is a large rectangular alloy sheet, painted grey, with folded edges on the two short sides and with eight bolt holes on each of the long edges. Attached to the panel are numerous piece of eq...REL32982.029
-
HMAS Brisbane : Combat Data Centre : Panel with equipment
Technology
Maker: Stanlite Electronics Pty Ltd
The panel with equipment is a rectangular alloy sheet, painted grey, with eight bolt holes around the edges. The panel is mounted above the plotting table. The panel has a VCS 945C attached, as well a...REL32982.042
-
HMAS Brisbane : Combat Data Centre : Plot Table
Technology
Maker: Sperry
The table is a large rectangular grey metal unit with a clear Perspex top. It has a heavy cast alloy base, supported in each corner by a shock mount. There are six cable exit elbows on the lower right...REL32982.040
-
HMAS Brisbane : Combat Data Centre : Plotting System Mk NC-2 Mod 1 ' Dead Reckoning Indicator.
Technology
Maker: Sperry Piedmont Co
The Plotting System is a large square unit housed in metal case painted grey. The front panel is black and contains a variety of dials and indicator lights. On the left hand side of the front panel ar...REL32982.039
-
HMAS Brisbane : Combat Data Centre : Red Warning Light
Technology
Maker: Unknown
The red warning light consists of a cylindrical pressed metal body, with a mounting bracket secured to the back. The bracket is rectangular and has two holes. The circular front of the unit is made of...REL32982.011
-
HMAS Brisbane : Combat Data Centre : Remote Chain Selector Unit
Technology
Maker: Unknown
The Remote Chain Selector Unit is a rectangular metal case, with two L shaped metal brackets attached to the rear left and right edges. Each bracket has two bolt holes. On the top of the unit is a rec...REL32982.013
-
HMAS Brisbane : Combat Data Centre Ship's Status Plotting Board
Technology
Maker: The W. H Reisner MFG Co.
The board consists of a rectangular alloy frame containing a clear acrylic sheet. The frame has a box section at the top and bottom. Each box section has six inset lamps to provide edge illumination f...REL32982.045
-
HMAS Brisbane : Combat Data Centre Ship's Status Plotting Board
Technology
Maker: Rois Manufacturing Company
The board consists of a rectangular alloy frame containing a clear acrylic sheet. The frame has a box section at the top and bottom. Each box section has six inset lamps to provide edge illumination f...REL32982.044
-
HMAS Brisbane : Combat Data Centre : Socket box
Technology
Maker: Unknown
The socket box consists of a rectangular cast metal case, painted grey. On the front is a cast cover panel secured by four screws. On the front of the panel is an embossed inscription which reads: `So...REL32982.031
-
HMAS Brisbane : Combat Data Centre : Sound Power Circuit Control Box
Technology
Maker: Unknown
The Sound Power Circuit Control Box is a square metal case, painted silver. On the back of the unit are two mounting holes, at the base are two cable clamps - approx 50cm of cable projects. The front ...REL32982.012
-
HMAS Brisbane : Combat Data Centre : Telephone assembly and hand-piece bracket
Technology
Maker: United States Instrument Corp
The assembly is a pressed metal rectangular case, painted grey. At the rear of the case are three welded mounting brackets, each drilled for a single bolt. There is a curved tubular pipe located on th...REL32982.018
-
HMAS Brisbane : Combat Data Centre : Telephone assembly and hand-piece bracket
Technology
Maker: Stromberg Carlson
The Assembly is a pressed metal rectangular case, painted grey. At the rear of the case are three welded mounting brackets, each drilled for a single bolt. A female electrical supply plug is fitted to...REL32982.017
-
HMAS Brisbane : Combat Data Centre : Telephone handset bracket
Technology
Maker: Unknown
The telephone handset bracket is made of two sections, the front is a pressed metal rectangular dish with rounded ends, partially cut away to allow the phone to be inserted. The rear section is anothe...REL32982.008
-
HMAS Brisbane : Combat Data Centre : Wind Direction and Speed Indicator Unit Type B (2of2)
Technology
Maker: Bendix Corporation Friez Instrument Division
The wind direction and speed indicator is a rectangular cast unit with rounded corners and three mounting points, two at the top rear edge and one in the centre of the lower rear edge. Adjacent to the...REL32982.005
-
HMAS Brisbane : Combat Data Centre : Wind Direction and Speed Indicator Unit Type B (1of 2)
Technology
Maker: Bendix (Pioneer Instrument Div) & Sprague Spec. Co Bendix Corporation Friez Instrument Division
The wind direction and speed indicator is a rectangular cast unit with rounded corners and three mounting points, two at the top rear edge and one in the centre of the lower rear edge. Adjacent to the...REL32982.004
-
HMAS Brisbane : Computer Set Control
Technology
Maker: Sperry Gyroscope Co
The Computer Set Control, Mk167 Mod3, is identical to that in the Gun Plot Room (Gun Plot document, #5). The Computer Set Control is a rectangular metal cabinet. Attached to the front is a set of thre...REL33080
-
HMAS Brisbane : Connector Box
Technology
Maker: Tabet Manufacturing Company, Inc.
The connector box is square in shape, made of brass and has three brackets attached to the back, one of which reads STRESS RELEIVED. There are no dials or switched on the console, although a nomenclat...REL33061
-
HMAS Brisbane : Door
Technology
Maker: Unknown
The door consists of two pressed metal panels secured to a welded frame. In the lower half of the door is a hinged access panel secured by two sliding bolts at the top. The door is painted light blue ...REL33090
-
HMAS Brisbane : Double Microphone holder
Technology
Maker: Unknown
The double microphone holder is a flat panel of metal, rectangular in shape, although with the two top corners rounded and the lower two pointed. In the middle of the panel are two brackets, slightly ...REL33022
-
HMAS Brisbane : Emergency Lamp
Technology
Maker: Unknown
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL33024
-
HMAS Brisbane : Engine Room : Ahead Control Wheel
Technology
Maker: Unknown
The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a...REL32981.037
-
HMAS Brisbane : Engine Room : Air filtration system.
Technology
Maker: Moore Products Co.
The air filtration system consists of three individual units joined together by copper pipes. The first unit is an air filter regulator, type 91F60/RH. Part of the label is obscured by a metal bracket...REL32981.034
-
HMAS Brisbane : Engine Room : Alarm Bell (x2)
Technology
Maker: Unknown
Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari...REL32981.005
-
HMAS Brisbane : Engine Room : Alarm Panel and Horn
Technology
Maker: Federal Sign and Signal Corporation Wing Corporation
Alarm Panel and horn. The panel consists of is a grey rectangular metal case. At the back are two welded brackets drilled with three bolt holes. At the bottom are two cable fittings, the cover is reta...REL32981.036
-
HMAS Brisbane : Engine Room : Astern Control Wheel
Technology
Maker: Unknown
The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a...REL32981.038
-
HMAS Brisbane : Engine Room : Bell assembly (section of) PORT
Technology
Maker: Unknown
This unit is circular in shape, made of metal and painted grey. On the front of the unit is engraved H-McC and 0000-S6504-74542. A grey metal bracket is also attached to the front of the unit. There a...REL32981.030
-
HMAS Brisbane : Engine Room : Boiler Maintenance Log Board
Technology
Maker: Unknown
The boiler maintenance log board consists of a rectangular piece of ply-wood with an acrylic cover. Under the acrylic cover is a piece of laminated paper chart with spaces for filling in daily mainten...REL32981.033
-
HMAS Brisbane : Engine Room : Dummy Log Speed Transmitter
Technology
Maker: Electric Tachometer Corp
The Dummy Log Speed Transmitter Type I consists of a rectangular cast case with a rectangular cover secured by four screws. At the rear of the unit is one cable fitting. In the upper part of the cover...REL32981.029
-
HMAS Brisbane : Engine Room : Electrical Box
Technology
Maker: Palmer Unknown
The electrical box consists of a rectangular brass case with rounded corners. At the back are two welded brass U channels drilled with three bolt holes. At the top and bottom of the case are two cable...REL32981.035
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body, and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-3000 PSIG. There is a red indicat...REL32981.020
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Moeller Instrument Co.
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-30. There is a red indicator ar...REL32981.013
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and an ochre front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-200 PSIG. There is a red line at...REL32981.016
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body and an orange front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-2000 PSIG. There is a red indica...REL32981.011
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-300 PSIG. There is a single black i...REL32981.019
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Ashcroft
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a red line at 12...REL32981.018
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Weksler Instruments
The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-1000. There is a red line at 600, ...REL32981.015
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: 3D Instruments Inc
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a single black in...REL32981.012
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 30-0-100. There is a red arrow at 74,...REL32981.014
-
HMAS Brisbane : Engine Room : Engine gauge
Technology
Maker: Moeller Instrument Co.
The gauge is circular with a machined alloy body and a white front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-600 PSIG. There is a red arrow at ...REL32981.017
-
HMAS Brisbane : Engine Room : Engine Order Indicator gauge
Technology
Maker: Sig-Trans Inc.
The engine order indicator gauge has a rectangular cover with six screw holes and an inset circular acrylic disc in the middle. Below the disc is a nomenclature plate that reads: Engine Order Equipmen...REL32981.022
-
HMAS Brisbane : Engine Room : Engine Order Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The engine order equipment indicator-transmitter consists of a cast alloy rectangular case, with a rectangular cover, secured by four screws. In the upper part of the cover is an acrylic disc, above a...REL32981.027
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i...REL32981.003
-
HMAS Brisbane : Engine Room : Gauge Board
Technology
Maker: Unknown
The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b...REL32981.002
-
HMAS Brisbane : Engine Room : Gauge Board labels
Technology
Maker: Unknown
Selection of gauge plates/labels from engine room gauge board (2 of 2). The plates are black plastic with white writing, rectangular in shape. They say -H.P Element 1st Stage Temp, Gland Steam, T/D Co...REL32981.010
-
HMAS Brisbane : Engine Room : Gauge Board Plate.
Technology
Maker: Unknown
Rectangular sheet of alloy with a thin layer of stainless steel bonded to the top surface. The markings are engraved on the top layer. They read: `H.M.A.S BRISBANE ' MAIN ENGINE CONDITIONS ' and then ...REL32981.009
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The gauge board valve body is a grey metal unit, circular in shape, with a large moveable metal pole attached to the top. On the front of the valve is a brass indicator panel. At the top of the panel ...REL32981.040
-
HMAS Brisbane : Engine Room : Gauge Board Valve body
Technology
Maker: Unknown
The valve body is a cylindrical L shaped section of metal pipe, painted white. Both ends of the pipe are sealed ' having been bolted closed. A large screw protrudes from the base of the unit.REL32981.042
-
HMAS Brisbane : Engine Room : Gauge board valve body
Technology
Maker: Unknown
The gauge board valve body is a circular, grey metal unit. On the front of the valve is a brass indicator panel. At the top of the panel is engraved SHUT, while at the bottom of the panel is engraved ...REL32981.041
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Unknown Weksler Instruments
The gauge is circular, with a machined alloy body and a grey rim. The face is white and is protected by an acrylic Perspex disc. It is calibrated from 0-1000 and has a red line indicator at 350. Nomen...REL32981.006
-
HMAS Brisbane : Engine Room : Gauge from Engine Board
Technology
Maker: Weksler Instruments
The gauge is circular with a machined alloy body with a grey rim. The face is white and is protected by an acrylic Perspex disc, calibrated from 0-1000 PSIG. There is a red indicator line at 500. Nome...REL32981.007
-
HMAS Brisbane : Engine Room : Light and Warning Sign
Technology
Maker: Unknown
The fluorescent light has a rectangular pressed metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the ...REL32981.004
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator Gauge
Technology
Maker: Unknown
The propeller revolution indicator gauge has a square cast alloy cover, with an inset circular acrylic disc in the middle. The cast alloy body of the unit is attached to the Engine Room gauge board. T...REL32981.024
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Electric Tachometer Corp
The propeller revolution indicator-transmitter consists of a rectangular case alloy case with rounded corners. There are cable access holes on the top and bottom of the unit. A cast alloy cover is att...REL32981.039
-
HMAS Brisbane : Engine Room : Propeller Revolution Indicator-Transmitter
Technology
Maker: Sig-Trans Inc.
The propeller revolution indicator/transmitter consists of a cast alloy body, painted grey. The front cover is a rectangular alloy sheet, secured by eight screws. On the cover of the unit are three in...REL32981.023