Filters
Collection
361 Results
-
Al Hussein Scud Missile Nose Cone
Technology
Maker: Unknown
Al Hussein Scud missile penetrator nose cone made from hardened steel, spitzer shaped and painted matt black. 'B244 1000-20 3172 83' is impressed into the nose cone. ' X3' is painted in white on the n...REL22595
-
AS350B Squirrel N22-017
Technology
Maker: Aérospatiale
Light utility helicopter RAN AS350 Squirrel N22-017. '864'. Aerospatiale build number 1744. Delivered to the Navy on 24 March 1984. Embarked aboard the RAN's frigates until replaced by the S-70B-2 ...AWM2017.1022.1
-
Captain's chair: HMAS Brisbane bridge
Technology
Maker: Unknown
The chair has a metal base and frame, the seat is upholstered in leather and consists of seat cushion and adjustable back and head- rest. The seat is a Holden Special Vehicle type, with the Holden HSV...REL32979.009
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
The aerial mast base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fitted with a large hexagonal nut. At the base is welded an alloy disc drilled for four bo...REL33184
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
The aerial mast base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fitted with a large hexagonal nut. At the base is welded an alloy disc drilled for four bo...REL33185
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
Aerial mast base. This base is used in conjunction with the nine Aerial Mast components (REL33079) The base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fit...REL33078
-
HMAS Brisbane : Aerial mast base
Technology
Maker: Unknown
The aerial mast base is cylindrical, and consists of a tubular alloy section which is threaded at the top and fitted with a large hexagonal nut. At the base is welded an alloy disc drilled for four bo...REL33186
-
HMAS Brisbane : Aerial mast components
Technology
Maker: Unknown
Nine (9) sections of aerial mast component, of different width and length. These components are used in conjunction with the four Aerial Mast bases (REL33078) Some of the sections (5) are covered with...REL33079
-
HMAS Brisbane : Anchor
Technology
Maker: Unknown
The anchor consists of two sections, the first is a cast steel shank with square cross section. At the uppermost part is a single steel pivot channel for connection to the anchor chain. At the base of...REL33094
-
HMAS Brisbane : Bell
Technology
Maker: Unknown
The bell consists of a triangular cast body with a plated finish. The bell is partially cut away at the top, and there is a square hole cut from the upper half of the unit. At the top of the bell are ...REL32998
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Henschel Corporation
The bell unit consists of a pressed metal body with a cover, to which is attached the bell. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. Printed on ...REL33040
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Henschel Corporation
The bell unit consists of a pressed metal body with a cover, to which is attached the bell. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. The cover i...REL33039
-
HMAS Brisbane : Bell Type IC/B2S4
Technology
Maker: Unknown
The bell unit consists of a pressed metal body, although the cover is missing. The unit is circular in shape. The body has three welded brackets, each with a single bolt hole. Printed on one of the br...REL33065
-
HMAS Brisbane : Bell Type IC/B1S4 and cover assembly
Technology
Maker: Hose-McCann Telephone Co. Inc.
The unit consists of a circular cover, secured by four screws (missing). The casing of the bell is missing. On the cover is a striker and a post mount for the bell, the bell is brass and attached with...REL33044
-
HMAS Brisbane : Bell Type IC/B1S4 and cover assembly
Technology
Maker: Hose-McCann Telephone Co. Inc.
The unit consists of a circular cover, secured by four screws (missing). The casing of the bell is missing. On the cover is a striker and a post mount for the bell, the bell is brass and attached with...REL33204
-
HMAS Brisbane : Bell Type IC/B1S4 and cover assembly
Technology
Maker: Hose-McCann Telephone Co. Inc.
The unit consists of a circular cover, secured by four screws (missing). The casing of the bell is missing. On the cover is a striker and a post mount for the bell, the bell is brass and attached with...REL33203
-
HMAS Brisbane : Box
Technology
Maker: Unknown
Metal box fabricated from riveted sheet alloy, with a single hinged door hinged on the right hand side with a latch on the left side. The interior of the box is divided into four equal compartments. T...REL32997
-
HMAS Brisbane : Box of sample cables
Technology
Maker: Unknown
Sample of cables of varying lengths, thickness and use.REL33091
-
HMAS Brisbane: Bridge
Technology
Maker: Defoe Shipbuilding Co
Bridge from the HMAS Brisbane. The bridge unit consists of an irregular 10-sided room, made of sheet alloy 7mm thick (approx). The front of the bridge has 13 square Perspex windows. On the left and ri...REL32979.001
-
HMAS Brisbane : Bridge : Original Signals Hut window with etched Navy vessel call signs
Technology
Maker: Defoe Shipbuilding Co
Original Signals Hut window with etched Navy vessel call signs. This relic consists of a 4 mm thick panel of perspex measuring 55 cm x 55 cm. There is evidence of silicone based sealant in patches a...REL32979.081
-
HMAS Brisbane : Bridge : R.E.R. Hatch Rubbers
Technology
Maker: Defoe Shipbuilding Co
R.E.R. Hatch Rubbers from the Bridge of HMAS Brisbane. There are two lengths of rubber seal. One length is approximately 4 metres long. The other length is approximately 3 metres long. Both rubbers...REL32979.080
-
HMAS Brisbane : Bus Failure Alarm Signal Unit
Technology
Maker: Henschel Corporation
The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left...REL33054
-
HMAS Brisbane : Bus Failure Alarm Signal Unit
Technology
Maker: Henschel Corporation
The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left...REL33055
-
HMAS Brisbane : Cell Location plate
Technology
Maker: Unknown
The plate is rectangular, made of polished stainless steel and has five holes around the edges for bolting it to the relevant equipment. Engraved on the plate is CELL LOCATION, and then Cell No.1 ' Ce...REL33073
-
HMAS Brisbane : Charge/Voltage indicator
Technology
Maker: Unknown
The charge/voltage indicator consists of a piece of flat rectangular metal, painted grey, with a clear plastic tube on the right hand side, held in place by two brackets. Written on the tube is `Maxim...REL32992
-
HMAS Brisbane : Chinagraph pencils (x9)
Technology
Maker: Staedtler Unknown
Nine packets of Chinagraph pencils. There are 10 pencils in each packet. The packets are green (x2), brown (x2), red (x2), white (x2), blue (x1).REL33030
-
HMAS Brisbane : Combat Data Centre : Amplifier
Technology
Maker: Radio Engineering Products
The amplifier consists of a rectangular metal case, painted grey. The front panel is an alloy sheet and is hinged along the front lower edge and is secured with two screws, one in each upper corner. O...REL32982.026
-
HMAS Brisbane : Combat Data Centre : Annunciator Type 1C/E4A
Technology
Maker: S.H Couch Co Inc
The Annunciator consists of a cast alloy rectangular body, with a rectangular front plate, painted grey. There are four mounting points, two on the left rear edge and two on the right rear edge. On th...REL32982.014
-
HMAS Brisbane : Combat Data Centre : Ceiling fluorescent light
Technology
Maker: Unknown
Rectangular metal casing containing three fluorescent lights - two white and one infrared, protected by a moulded white plastic cover. There are four mounting points attached to the back of the unit. ...REL32982.006
-
HMAS Brisbane : Combat Data Centre : Chair
Technology
Maker: Turnbull Enterprises Inc
The chair consists of a cylindrical cast column base which mounts on a square floor plate (REL32982.002). The chair is attached to the plate using a pipe collar (REL32980.137). Above the column is a ...REL32982.001
-
HMAS Brisbane : Combat Data Centre : Chair base
Technology
Maker: Unknown
The base is fabricated from alloy sheet, is square in shape and is reinforced below with welded L channel. In the middle of the top surface is a raised circular section into which the base pole of the...REL32982.002
-
HMAS Brisbane : Combat Data Centre : Control Module VCS 945C
Technology
Maker: Stanlite Electronics Pty Ltd
The Control Module is housed in a rectangular metal case. The front of the unit is a square metal plate painted grey and secured by four screws (3 fitted). On this is mounted at the top a moulded plas...REL32982.007
-
HMAS Brisbane : Combat Data Centre : Dark Blue nylon/plastic material.
Technology
Maker: Unknown
Section of dark blue nylon/plastic material used to cover seats etc. There are several meters of material, which was given to the AWM as a spare. (PROP MATERIAL)REL32982.041
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with bracket
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.010
-
HMAS Brisbane : Combat Data Centre : Emergency light unit with cable
Technology
Maker: Rob Ian Company
The emergency lamp has a rectangular metal case, painted yellow. The front is bakelite (also painted yellow) and is attached with four screws. The lamp is inset and covered by a heavy glass lens. In t...REL32982.009
-
HMAS Brisbane : Combat Data Centre : Fluorescent light
Technology
Maker: Unknown
The fluorescent light has a rectangular metal case. On the upper surface are six screws and two large bolts (fitted). On the lower surface there are two cover sections at the ends, and in the middle a...REL32982.003
-
HMAS Brisbane : Combat Data Centre : Intercommunication Station (Intercom system interface).
Technology
Maker: Hughes Aircraft Company
The Intercommunication Station is a large metal rectangular box painted grey. On the front panel of the unit is a variety of dials, switches and indicator lights. On the right and left side is a silve...REL32982.038
-
HMAS Brisbane : Combat Data Centre : Intercommunication station with cables.
Technology
Maker: Unknown
The intercommunication station consists of a rectangular cast metal case, painted grey, with a cast lid, secured by four screws. On the top of the unit are two exit points for cables (unused). On the ...REL32982.030
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.019
-
HMAS Brisbane : Combat Data Centre : Lamp fitting
Technology
Maker: Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, two oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the base is a ...REL32982.028
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top is a...REL32982.020
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting
Technology
Maker: Modern Metal MFG Unknown
The lamp consists of a pressed metal rectangular case with rounded corners, three oval mounting brackets are riveted to the back. At the lower rear edge is a plated metal flick-switch, at the top of t...REL32982.021
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Unknown
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, two oval mounting brackets are riveted to the back of each. At the lower rear edge is a plated metal f...REL32982.027
-
HMAS Brisbane : Combat Data Centre : Lamp Fitting (double)
Technology
Maker: Modern Metal MFG
The lamp fitting (double) consists of a two pressed metal rectangular cases with rounded corners, three oval mounting brackets are riveted to the back of each. At the lower rear edges is a plated meta...REL32982.022
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.024
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Unknown
Loudspeaker housed in a rectangular metal case with rounded corners. The speaker has a grey metal base and front. The two pieces are screwed together via four bolts, one in each corner. On the front o...REL32982.025
-
HMAS Brisbane : Combat Data Centre : Loudspeaker
Technology
Maker: Electronic Research Associates, INC
Loudspeaker in rectangular metal case with rounded corners at the top. The front panel is a flat alloy sheet with a circular cut-out for the speaker. Below is a small knob to increase volume (knob mis...REL32982.023
-
HMAS Brisbane : Combat Data Centre : Loudspeaker, P.M Type 49546
Technology
Maker: University Sound
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take three bolts. On ...REL32982.016
-
HMAS Brisbane : Combat Data Centre : Loudspeaker type 49546
Technology
Maker: University Loudspeakers
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.036
-
HMAS Brisbane : Combat Data Centre : Loudspeaker Type 49546
Technology
Maker: University Loudspeakers
The loudspeaker has a cast body consisting of a cylindrical front section and a rectangular rear section. At the rear left and right edges are projecting flanges, each drilled to take two bolts. On th...REL32982.032