Filters
Collection
23 Results
-
A garland trench mortar in a post on Silt Spur at Anzac, occupied by the 10th Battalion. ...
Photograph
Maker: Unknown
A garland trench mortar in a post on Silt Spur at Anzac, occupied by the 10th Battalion. Sergeant Alexander William Lauchlan McNeil [MacNeil] is at the gun.A02166
-
A member of the 28th Battalion fires a trench mortar in a front line trench on the Apex, ...
Photograph
Maker: Unknown
A member of the 28th Battalion fires a trench mortar in a front line trench on the Apex, Gallipoli.C02423
-
7.6 cm leichte Minenwerfer 1916 n/a in Flachbahn-Lafette
Technology
Maker: Unknown
Model 1916 trench mortar mounted on a turntable that is attached to a metal baseplate. The mortar can rotated through 360 degrees. The barrel is rifled and is fitted with hydraulic recoil recuperator...REL/04285
-
7.6 cm leichte Minenwerfer 1916 n/a Trench Mortar Clinometer and charge range scale
Technology
Maker: Unknown
Trench Mortar Clinometer and charge range scale with three main components: - a steel range adjusting arm marked with inscribed hatches and range distances. Slightly corroded. - A steel clamp wh...RELAWM11608
-
7.6 cm leichter Minenwerfer 1914 a/A Trench Mortar
Technology
Maker: Unknown
Early model 76 millimeter trench mortar. The mortar consists of a short rifled barrel with three recoil cylinders attached to the outside of the barrel. The baseplate is rectangular in shape and has t...RELAWM05069
-
7.6 cm Minenwerfer (Trench Mortar) Shell
Technology
Maker: Unknown
Empty German light trench mortar shell.RELAWM07696
-
Firing lanyard for Model 1916 Grenade Launcher (Granatenwerfer 16)
Technology
Maker: Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
Twine firing lanyard approximetely 5010 mm in length and 3-4mm thick. Attached to one end is a steel clip and swivel ring approximately 100 mm. At the other end is a wooden toggle made of turned wood ...RELAWM10972.002
-
Garland trench mortar bomb : The Nek, Gallipoli
Technology
Maker: Unknown
Remains of a Garland mortar grenade. It consists of the cast iron case of the grenade, similar in shape to a mushroom. The metal is corroded and retains some of the soil in which it was found.RELAWM07819
-
Grenade Howitzer Mark 1 (Garland Mortar)
Technology
Maker: Unknown
Smooth bore trench mortar with fixed barrel set at approximately 45 degrees. The barrel is made from steel which is attached to a brass breech piece with powder recess, bolted onto a wooden block that...RELAWM00373
-
Howitzers and Trench Mortors captured from the Turks during the Allied advance through Palestine.
Photograph
Maker: Unknown
Howitzers and Trench Mortors captured from the Turks during the Allied advance through Palestine.J00955
-
3 inch Stokes Mortar Barrel
Technology
Maker: Unknown
3 inch Stokes Mortar barrel made from ordnance steel. The barrel is smoothbore and has a fixed firing pin in the base.RELAWM05056.001
-
3 inch Stokes Mortar Baseplate
Technology
Maker: Unknown
3 inch Stokes Mortar baseplate made from ordnance steel.RELAWM05056.002
-
3 inch Stokes Mortar Bipod
Technology
Maker: Unknown
3 inch Stokes mortar bipod made from ordnance steel. The bipod is foldable and features leg stays. The sight support bracket, cradle and elevating and traversing bracket are missing. The bipod is pain...RELAWM05056.003
-
Japanese mortar charge case from Gallipoli
Technology
Maker: Unknown
Mortar charge case used in a Japanese trench mortar. The mortar was manned by personnel of the Royal Garrison Artillery at Anzac.RELAWM00368
-
Major Felix Gordon Giles Commanding Officer of the 10th Battalion, standing outside the dugout of ...
Photograph
Maker: Unknown
Major Felix Gordon Giles Commanding Officer of the 10th Battalion, standing outside the dugout of the Commanding Officer of the 10th Battalion, holding an improvised Turkish 'stick' mortar, made of a ...A02159
-
75 mm M 17 Kolben Smoothbore Mortar
Technology
Maker: Unknown
Muzzle-loading mortar made from steel tubing and cut steel plate and channel. The mortar frame is held together by rivets and bolts. The barrel is supported by a steel frame which allows the barrel to...RELAWM05058
-
75 mm Mortier Van Deuren (Trench Mortar)
Technology
Maker: Unknown
Belgium trench mortar made from cast steel and mounted on a wooden baseplate. The Mortar had a barrel with a fixed elevation. Variation in range was achieved by use of different charges of powder in t...RELAWM05053.001
-
Model 1916 Grenade Launcher (Granatenwerfer 16)
Technology
Maker: Firma Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
The Model 1916 grenade launcher (Granatenwerfer) is a spigot type weapon made from cast steel. The spigot contains a firing pin which is cocked by a lever on the side of the weapon with the propellant...RELAWM10972.001
-
Mortiér de 58 mm No 2 (Trench Mortar - France)
Technology
Maker: Unknown
French 58 millimeter mortar designed to fire a finned projectile. The mortar is made from cast steel, and is smooth-bored and has a simple elevating mechanism built onto the carriage. The elevation i...RELAWM05052
-
Piece of shrapnel in box : Brigadier J Monash, 4 Australian Infantry Brigade, AIF
Heraldry
Maker: Unknown
Small piece of shrapnel in a cardboard box. The recatangular box has a removable lid and is made from yellow and red cardboard. The top of the box has a white label stuck to it which reads 'SPECIALLY ...RELAWM15083