Filters
Filters (3 applied)
Clear All-
type (2)
-
has sound (1)
-
has video (1)
-
Conflict (2)
Collection
6 Results
-
7.6 cm leichte Minenwerfer 1916 n/a Trench Mortar Clinometer and charge range scale
Technology
Maker: Unknown
Trench Mortar Clinometer and charge range scale with three main components: - a steel range adjusting arm marked with inscribed hatches and range distances. Slightly corroded. - A steel clamp wh...RELAWM11608
-
7.6 cm leichter Minenwerfer 1914 a/A Trench Mortar
Technology
Maker: Unknown
Early model 76 millimeter trench mortar. The mortar consists of a short rifled barrel with three recoil cylinders attached to the outside of the barrel. The baseplate is rectangular in shape and has t...RELAWM05069
-
7.6 cm Minenwerfer (Trench Mortar) Shell
Technology
Maker: Unknown
Empty German light trench mortar shell.RELAWM07696
-
Firing lanyard for Model 1916 Grenade Launcher (Granatenwerfer 16)
Technology
Maker: Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
Twine firing lanyard approximetely 5010 mm in length and 3-4mm thick. Attached to one end is a steel clip and swivel ring approximately 100 mm. At the other end is a wooden toggle made of turned wood ...RELAWM10972.002
-
Model 1916 Grenade Launcher (Granatenwerfer 16)
Technology
Maker: Firma Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
The Model 1916 grenade launcher (Granatenwerfer) is a spigot type weapon made from cast steel. The spigot contains a firing pin which is cocked by a lever on the side of the weapon with the propellant...RELAWM10972.001
-
The Australian War Records Section's trophy store at Millwall Docks, showing a collection of ...
Photograph
Maker: Unknown
The Australian War Records Section's trophy store at Millwall Docks, showing a collection of captured German trench mortars (minenwerfers) and hundreds of MG08 and MG08/15 machine guns and accessories...D00780