Filters
Collection
26 Results
-
Lewis Mark II Aircraft Machine Gun
Technology
Lewis Mark II Aircraft Machine Gun. The action has a small right hand cocking lever, a wooden pistol grip and a leather covered rear spade grip for an oil brush (missing). The receiver top plate is ma...RELAWM13567
-
No 36 Mk I Grenade (Mills Bomb)
Technology
No 36 Mk I grenade. The body is oval shaped and is made from cast iron. The wall is segmented in an attempt to control fragmentation and provide grip. A screw plug is formed on the side for filling t...RELAWM02093
-
Pattern 07 Bayonet : Lance Corporal A Hembury, 16 Battalion AIF
Technology
Pattern 07 Bayonet. The hilt has a hooked quillon muzzle ring crossguard, two piece wooden grips held to the tang by two screw bolts and the pommel has a T section mortice slot and a push button locki...REL/19479.001
-
Scabbard for Pattern 07 bayonet : Lance Corporal A Hembury, 16 Battalion AIF
Technology
Scabbard for Pattern 07 Bayonet. The scabbard has a blued chape and locket, with a tear drop frog stud, attached by wire staples to the brown leather body. The locket throat is stamped '4MD' over '593...REL/19479.002
-
Scabbard Mark II. for Sword Bayonet, Pattern 1907, Mark I.
Technology
Maker: Unknown
The brown leather scabbard with stitching down the back has a steel frog stud locket and chape.REL29069.002
-
Scabbard Mark. II for Sword Bayonet, Pattern 1907, Mark. I : Private W G Hoffman, 32nd Battalion, AIF
Technology
Maker: Mills Equipment Company
Pattern 1907 bayonet scabbard and Pattern 1908 webbing frog. The frog has a belt loop and two web loops on the front through which the scabbard is fitted. On the reverse is a tab with a brass end used...RELAWM07759.005
-
Scabbard Mark II. for Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece : recovered from Ak Bashi, Gallipoli
Technology
Maker: Small Arms Factory, Lithgow
Steel mounted black leather scabbard with a tear drop shape frog stud on the locket. The locket and chape are attached by wire lace.RELAWM00392.002
-
Ship's lifeboat from HMT Devanha which was used during the landings at Gallipoli
Technology
Maker: Unknown
The number 5 timber lifeboat from the P&O ship SS Devanha. The lifeboat is of clinker construction and has single bow and stern posts connected to a heavy exposed keel. The posts are made up of sever...RELAWM04994
-
Shortened Sword Bayonet, Pattern 1907, Mark I. and Scabbard
Technology
Maker: Small Arms Factory, Lithgow
Pattern 07 (shortened) bayonet with scabbard and belt webbing. The blade has been ground down to 23cm and the scabbard modified accordingly. The manufacturer's name (Lithgow) is impressed on one side ...REL/05988
-
Sword Bayonet, Pattern 1907, Mark I. : recovered from Bullecourt
Technology
Maker: Unknown
Generally intact, but heavily corroded Pattern 07 bayonet with a straight cross guard and clearance hole in the pommel. Only a small fragment of wood from the grips remains on the left side.REL/13838
-
Sword Bayonet, Pattern 1907, Mark. I : recovered from Gaba Tepe, Gallipoli
Technology
Maker: Unknown
Remains of a Pattern 07 bayonet. The hilt has plain wooden grips held to the tang with two screw bolts. There is a small hole on one side of the grips. The bayonet is missing its cross guard, muzzle r...RELAWM00327
-
Sword Bayonet, Pattern 1907, Mark I. with hooked on crosspiece
Technology
British Pattern 07 Bayonet. The hilt has a hooked quillon crossguard stamped 216 and the pommel an arrow within a D. The grips are plain wood held to the tang with two screw bolts. The blade is straig...REL/11662
-
Sword Bayonet, Pattern 1907, Mark I. with hooked removed on crosspiece with Scabbard Mark II.
Technology
Maker: Chapman
Bayonet with long, narrow fullers on each side of blade. Ring and mortise slot with locking bolt secures the bayonet to the rifle nosecap. The wooden grips are secured by two screws while the press s...REL/16477
-
Sword Bayonet, Pattern 1907, Mark I. with hooked removed on crosspiece with Scabbard Mark II.
Technology
Maker: Mole
Bayonet with long, narrow fullers on each side of blade. Ring and mortise slot with locking bolt secures the bayonet to the rifle nosecap. The wooden grips are secured by two screws while the press s...REL/16476
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece
Technology
British Pattern 07 Bayonet. The hilt has a hooked quillon crossguard and the pommel is stamped SA.5663. The grips are plain wood held to the tang with two screw bolts. The blade is straight with a sin...REL/05564
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece
Technology
Pattern 07 bayonet. The hilt has plain wooden grips held to the tang with two screw bolts. The cross guard has a muzzle ring and a hooked quillon. The pommel is stamped with an arrow in a D. The blade...REL/07076.001
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece
Technology
British Pattern 07 Bayonet. The hilt has a hooked quillon crossguard and the pommel is stamped NSW 5517. The grips are plain wood held to the tang with two screw bolts. The blade is straight with a si...RELAWM28888
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece : recovered from Ak Bashi, Gallipoli
Technology
Maker: Small Arms Factory, Lithgow
Pattern 07 bayonet with ring and mortise slot with locking bolt to secure the bayonet to the rifle nosecap. The single edged blade is fullered on both sides for about 300 mm. The hilt has plain wooden...RELAWM00392.001
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece : 7th Battalion A.I.F.
Technology
British Pattern 07 Bayonet. The hilt has a hooked quillon crossguard stamped V24031 and the pommel 7A1 with an arrow in a D. The grips are plain wood held to the tang with two screw bolts. The blade i...REL/05563
-
Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece with Scabbard Mark II.
Technology
British Pattern 07 Bayonet. The hilt has a hooked quillon crossguard and the pommel is stamped SA 1445. The grips are plain wood held to the tang with two screw bolts. The blade is straight with a sin...RELAWM13290.001