Filters
Collection
730 Results
-
Maxim MG08/15 Light Machine Gun Lock: 20 Battalion AIF, Mont St Quentin
Technology
German Maxim MG08/15 Light Machine Gun. The MG 08/15 Maxim light machine gun is a short recoil operated, water cooled, full automatic, belt fed weapon. The operating system uses a two part toggle lock...REL/19531.001
-
Maxim MG08/15 Light Machine Gun : Sergeant S R McDougall VC, 47 Battalion, AIF
Technology
The MG 08/15 Maxim machine gun is a short recoil operated, water cooled, fully automatic, belt-fed weapon. The operating system uses a two-part toggle lock connected by a hinge which is located betwee...RELAWM00771
-
Maxim MG08 Machine Gun : 46 Battalion, AIF
Technology
Maxim MG08 heavy machine gun. This gun is missing the top cover, feed block, flash hider and the bolt mechanism but has an armoured top shield. Painted on the left side in white is 'Captured by the 46...RELAWM11058
-
Maxim MG08/15 Machine Gun Lock
Technology
Lock mechanism for Maxim MG08/15 light machine gun. The lock is made from ordnance steel and is made from machined parts that fit together and comprise the operational mechanism that is located in the...RELAWM30192.003
-
Maxim Model 1905 Machine Gun
Technology
Russian Maxim Model 1905 Heavy Machine Gun. The gun has a blackened brass water jacket and is complete with a brass feed block and fusee cover marked 1907 with the manufacturer's name Tul'skiy (Tula) ...RELAWM03907.001
-
Maxim Sledge Mount : Private G Cartwright, 33 Battalion, AIF
Technology
German Maxim MG08 Heavy Machine Gun and Sledge Mount.RELAWM00981.002
-
M1866 Chassepot Bayonet and scabbard : Brigadier General R L Leane
Technology
Maker: St- Etienne Imperial Arsenal
M1866 Chassepot bayonet and brass hilt with a leaf spring secured by a rivet. Stamped on the left side of the cross guard are the numbers '31231', and on the quillon the letter 'B' with another undist...REL36708
-
Message Cable : Sergeant A R H Joyner, 1st Divisional Signal Company AIF
Technology
Maker: Unknown
Length of telephone wire covered in black coloured insulation. Attached to the wire is a tag.RELAWM09344
-
Message Rocket : Lieutenant W H G Geake, AIF Research Section
Technology
Maker: British Munitions Inventions Department
Message rocket consisting of two sections - the head of the rocket that contains the propellant and has a siren whistle at the tip, and the tail which is a thin two-piece tube which carries the smoke ...RELAWM04381
-
Message streamer from Mont St Quentin
Technology
Maker: Unknown
Aircraft message streamer constructed of two equal streamer lengths attached to a cotton weight pocket (weight missing). The streamer lengths are of red, white and blue fabric. The red or tail is plai...RELAWM15926
-
Metal Fragment: removed from an Emden sailor by Captain H B Lewers, Australian Army Medical Corps, AIF
Technology
Maker: Unknown
8 mm fragment of metal removed from the person of a German sailor wounded during the Emden's battle with HMAS Sydney. Kept with a paper envelope, folded in four and badly torn. Front inscription read...REL/03472
-
MG08/15 Machine Gun Belt Drum Magazine
Technology
Maxim MG08/15 100 round drum magazine introduced by the German Army in 1917. The drum magazine is of pressed metal construction and fits on the right side of the Maxim 08/15 machine gun. The magazine ...RELAWM07909
-
Mk IV Female Tank
Technology
Mk IV 'Female' Tank. A First World War British armoured fighting vehicle, weighing 28 tonnes, and carrying a crew of 8 - driver, commander, two gearsmen, and four machine gunners. Manufactured by the ...RELAWM05040.001
-
Mk IV Tank Periscope: Battle of Cambrai
Technology
Periscope of one of the tanks employed in the British surprise attack on Cambrai on 20 November 1917.RELAWM00675
-
Mle 1917 nA Egg Hand Grenade : Sergeant A E Green, 9 Battalion AIF
Technology
Maker: Unknown
Mle 1917 nA Egg Hand Grenade made from cast iron and featuring a centralised fragmentation ring. The fuze is present. There are no markings.REL34884
-
Mle 1917 nA (Var) Egg Hand Grenade : Sergeant A E Green, 9 Battalion AIF
Technology
Maker: Unknown
Mle 1917 nA (Var) Egg Hand Grenade made from cast iron and featuring a centralised fragmentation ring. There is no fuze. There are no markings.REL34883
-
Mle 1892 Revolver
Technology
Maker: Manufacture d'Armes St Etienne
French Model 1892 six shot, double action army revolver. Frame stamped Mre d'Armes St Etienne and the serial number. The barrel top is engraved Mle 1892 and S1902. The grips are two piece checkered wo...REL29399.001
-
37 mm Artillery Cartridge Mle 1916 Infantry Gun
Technology
Cartridge employed by the French Mle 1916 Infantry Gun. The catridge is a rimmed, bottle-necked, brass drawn case that has been extensively embossed with trench art. The trench art features floral pat...REL31806
-
95 mm Lanz Minenwerfer (Smoothbore Mortar)
Technology
Maker: Fabrik Heinrich Lanz & Co, Mannheim Lanz
Lanz smoothbore muzzle loading mortar made from steel. The mortar is mounted on a four legged steel frame which is attached to two wooden anchor blocks. The mortar has a locked breech and pin assembly...RELAWM05060
-
95 mm Lanz Minenwerfer (Smoothbore Mortar)
Technology
Maker: Fabrik Heinrich Lanz & Co, Mannheim
Muzzle loading light trench mortar built on a steel cradle which is attached to a circular steel baseplate. The mortar has a locking handle attached on the right side used to elevate and depress the s...RELAWM05059
-
87 mm Mauser Trench Mortar Barrel
Technology
Maker: Lanz Mauser
German Mauser 87 mm muzzle loading trench mortar made from steel. The barrel is smoothbore and is clamped to a rack which can be elevated and depressed. The breech has the firing mechanism attached....RELAWM05062.001
-
87 mm Mauser Trench Mortar Bipod
Technology
Maker: Lanz Mauser
German Mauser 87 mm trench mortar bipod made from steel. The bipod is made from angled steel and is bolted together. The barrel and frame are attached to the bipod. An elevation lever is attached to ...RELAWM05062.002
-
75 mm M 17 Kolben Smoothbore Mortar
Technology
Maker: Unknown
Muzzle-loading mortar made from steel tubing and cut steel plate and channel. The mortar frame is held together by rivets and bolts. The barrel is supported by a steel frame which allows the barrel to...RELAWM05058
-
75 mm Model 1903 Field Gun : Ottoman Army
Technology
Model 1903 75 mm Field Gun contract used by the Turkish Army during the First World War. This gun was made by Krupp and is one of 558 made to Turkish specifications. The gun is a box trail, horse draw...RELAWM05011.001
-
75 mm Mortier Van Deuren (Trench Mortar)
Technology
Maker: Unknown
Belgium trench mortar made from cast steel and mounted on a wooden baseplate. The Mortar had a barrel with a fixed elevation. Variation in range was achieved by use of different charges of powder in t...RELAWM05053.001
-
37 mm Sockel Flak Anti Aircraft Projectile
Technology
A 37 millimetre Sockel Flak anti aircraft projectile developed toward the end of the First World War for German Army anti aircraft troops. The projectile can be fired in the 3.7 cm Sockel Flak, the 3....REL30609
-
Mobile Sniper Post
Technology
Mobile Sniper Post. Rivetted box shape construction with an angular front having two rifle slots that can be closed with swinging covers and has four eye slits. It is moved on two steel disc wheels th...REL/12494
-
Model bandage winder : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Bandage winder, consisting of a pair of steel 'A' frames at each end, a cranked winder located through two holes at the apex of the frame, and a pair of adjustable supports at the rear, allowing diffe...REL/01573
-
Model collapsible structure : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Model of an oval framework structure which can expand and contract with a scissor-arm concertina action. Model consists of six ovaloid copper forms, each with a large central rectangular cut-out, and ...REL/01577
-
Model 1917 Enfield Rifle
Technology
Model 1917 Enfield bolt action rifle. Receiver stamped U.S. MODEL OF 1917 WINCHESTER and the serial number. Barrel stamped near the muzzle 3-18. Bolt marked W and NS. Full wood stock with a top hand g...REL/05764
-
Model fire fighting sand disc : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Circular disc, made from an inner and an outer ring of 15mm wide cardboard with compartments contained within the resultant ring. These have been filled with sand and the entire assembly has then been...REL/01579.001
-
Model fire fighting sand discs : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Three discs, each made from an inner ring (about 125mm diameter) and an outer ring (about 250mm diameter) of 15mm wide cardboard, the two joined by divisions or spokes of cardboard. One side of the re...REL/01576
-
Model four ounce stretcher : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Prototype, handsewn 4 ounce canvas stretcher consisting of a pair of linen webbing forms, each a square about 275 mm, with a pair of crossbraces which are sewn diagonally across the squares, and exten...REL/01575
-
Model 1917 German stick grenade : Captain D V Mulholland, 3 Machine Gun Company AIF
Technology
German Model 1917 stick grenade. The grenade warhead is made from sheet steel and has an iron belt hook attached to one side. The shaft is made from wood and features an aluminium screw cap at the bas...RELAWM09543.001
-
Model life raft frame: Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Expanding/contracting structure consisting of 155 mm long lengths of 5 mm diameter bamboo, pinned together at each end, and in the middle, to operate in a scissors motion. When expanded, the structure...REL/01570
-
Model mobile bridge : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Model of a mobile folding bridge consisting of a trio of pivoting, scissor-action wooden U-frames, one of which is fitted with a pair of folded tin stub axles and wheels with rubber tyres. One of the ...REL/01571
-
Model 1915 nA Hand Grenade (Kugelhandgranate) : Sergeant A E Green, 9 Battalion AIF
Technology
Maker: Unknown
The 1915 nA hand grenade is ball shaped grenade made of cast iron with large external segments. There are no markings.REL34882.001
-
Model of a repaired well at Khalassa, Palestine
Technology
Maker: Unknown
Cross-sectional model showing a bell-shaped water well and pump. The model includes a cross-section of the bedrock as well as the desert sand above. The well sits within a depression and is lined with...RELAWM04187
-
Model of dummy tank used in Hindenburg Outpost Line Attack : 4 Field Company, AEME, AIF
Technology
Maker: 4th Field Company Australian Engineers Greenaway, John Forbes Meaker, Leslie Wilfred
Model of a Mark V tank in approximately 1/10 scale, featuring a braced wooden framework and a pair of large operating wheels (about 220mm in diameter) located centrally, which extend some 30mm through...RELAWM00955
-
Model of submarine HMAS AE1
Technology
Maker: SD Model Makers
Model of the submarine HMAS AE1 realised in 1:48 scale, mounted on a wooden base on two nickel plated stands. The model's hull is made from Philippines mahogany with accessories made from brass. The u...REL48093
-
Model of the Cerisy to Chipilly bridge : Private Seccombe, 3 Pioneer Battalion, AIF
Technology
Maker: Seccombe, Cecil Stanley
Model bridge hand crafted from wood, brass and other metals. The model is mounted on a rectangular block of polished wood with a engraved brass plaque attached to the front. The plaque reads 'MODEL OF...RELAWM04189
-
Model Pharmacy and Treatment Coach no 43F: British hospital train, Western Front
Technology
Maker: Swindon Railway Works
This model, built in 1 1/2 inch to the foot (1:8) scale, is of a First World War pharmacy and treatment coach. The underframe is of steel and brass, the body and roof of wood, with additional details ...RELAWM04318
-
Model portable waste incinerator : Sergeant A Worsfold, AIF Research Section, Imber Court Experimental Grounds
Technology
Maker: Worsfold, Alexander
Model made from flat sheets of 1 mm thick copper, forming an elongated vertical box. Each side panel is wired to its neighbour at the top and bottom with a celluloid viewing panel let into the proper ...REL/01572
-
Model prototype De Mole Tank
Technology
Maker: De Mole, Lancelot Eldin Williams and Benwell
A 1/8 scale model of the lower hull and running gear of a tracked fighting vehicle designed by Lancelot 'Lance' De Mole. A contemporary photograph of the model - J00300 - is also held by the Memorial....RELAWM01900
-
Model 1892 Service Revolver
Technology
French Model 1892 six shot, double action army revolver. Frame stamped Mre d'Armes St Etienne and the serial number. The barrel top is engraved Mle 1892. The grips are two piece checkered wood and the...REL/15437.001
-
Model Ship : HIJMS 'Ibuki'
Technology
Maker: Unknown
Model of the Japanese battle cruiser 'Ibuki' in approximately 1:96 scale, constructed from material salvaged from the original ship and built at Kure, Japan. Finished in black and red laquer and depic...RELAWM08039
-
Model Ship: HMAT Orvieto
Technology
Maker: Workman Clark & Company
Large wooden hulled maker's model of the Royal Mail Ship Orvieto. The model is finished in enamel paints in the livery of the Orient Steam Navigation Company, the lower hull below the waterline in an ...RELAWM09634
-
Model Ship : River Class Torpedo Boat Destroyer HMAS Yarra (I)
Technology
Maker: Walker, John B
Hand made scale model of HMAS Yarra (I) in a scale of 1/4 inch to the foot (1:48 scale). The hull is shaped from a composite of wooden sections, with a pair of low wooden funnels. The model is painted...RELAWM14986
-
Model Ship SMS Emden : Quartermaster, SMS Emden
Technology
Hand made model of SMS Emden, realised in wood, brass, copper and wire, in approximately 1:150 scale. The hull is carved from wood, and features teak decking, full rigging, gun turrets, separate lifeb...RELAWM14258
-
Model 1916 Spigot Grenade Launcher (Granatenwerfer)
Technology
Maker: Firma Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
Model 1916 spigot grenade launcher (Granatenwerfer) made from ordnance steel. The grenade launcher features a spigot shaft and body which is attached to a base plate. An elevation scale is attached t...RELAWM01833