Filters
Collection
1098 Results
-
Pfalz D.XII Scout Aircraft : Fuselage
Technology
The fuselage of Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The fuselage is constructed from moulded plywood and is covered with a plain linen material which was then...RELAWM04805.001
-
Pfalz D.XII Scout Aircraft horizontal stabiliser fabric
Technology
Maker: Pfalz Flugzeug Werke GmbH
Samples of fabric from the horizontal stabiliser and elevators of Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The samples were removed during restoration work on the ...RELAWM04805.019
-
Pfalz D.XII Scout Aircraft : Port wheel : Wheel cover inner (original)
Technology
Maker: Pfalz Flugzeug Werke GmbH
One circular fabric cover, as fitted to the port wheel inner of Pfalz D.XII 2600/18.RELAWM04805.007.001
-
Pfalz D.XII Scout Aircraft : Port wheel : Wheel cover outer (original)
Technology
Maker: Pfalz Flugzeug Werke GmbH
One circular fabric cover, as fitted to the port wheel outer of Pfalz D.XII 2600/18.RELAWM04805.007.002
-
Pfalz D.XII Scout Aircraft : Propeller
Technology
Maker: Luckenwalde Propellerwerke
Propeller from the Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The propeller bears a silver decal showing a three ringed logo applied to the forward face of each blad...RELAWM04805.009
-
Pfalz D.XII Scout Aircraft : Propeller : Hub front
Technology
Maker: Pfalz Flugzeug Werke GmbH
Propeller hub front from the Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The front section of the hub is a machined steel disc, which fits to the central splined sect...RELAWM04805.009.002
-
Pfalz D.XII Scout Aircraft : Propeller : Hub rear
Technology
Maker: Pfalz Flugzeug Werke GmbH
Propeller hub rear from the Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The front section of the hub is a machined steel disc, which fits to the central splined secti...RELAWM04805.009.003
-
Pfalz D.XII Scout Aircraft : Starboard wheel
Technology
Maker: Pfalz Flugzeug Werke GmbH
The starboard wheel from Pfalz D.XII single engine biplane scout/fighter aircraft, serial no. 2600/18. The wheel assembly consists of a plain steel one-piece rim connected to the hub with steel spokes...RELAWM04805.008
-
Pfalz D.XII Scout Aircraft : Starboard wheel : Wheel cover inner (reproduction)
Technology
Maker: Pfalz Flugzeug Werke GmbH
One circular fabric cover, as fitted to the starboard wheel inner of Pfalz D.XII 2600/18.RELAWM04805.008.001
-
Pfalz D.XII Scout Aircraft : Starboard wheel : Wheel cover outer (reproduction)
Technology
Maker: Pfalz Flugzeug Werke GmbH
One circular fabric cover, as fitted to the starboard wheel outer of Pfalz D.XII 2600/18.RELAWM04805.008.002
-
Piece of fabric from Fokker aircraft : Baron Manfred von Richthofen, Geschwader 1, German Air Service
Technology
Maker: Fokker Aeroplanbau
Consists of a piece of pink blotting paper, a fabric sample and a white envelope. The blotting paper bears numerous imprints in ink and a mark on the right hand side that matches the fabric sample. Th...REL/00926
-
Piece of fabric from Fokker DR1 aircraft : Baron Manfred von Richthofen, Geschwader 1, German Air Service
Technology
Maker: Fokker Aeroplanbau
An approximately rectangular section of fabric, finished with two layers; a light blue/grey layer underneath and a red layer on top. The fabric is marked on the reverse with a circular ink stamp 47mm ...REL/00920.001
-
Piece of Sopwith Pup Propeller : Flight Lieutenant E H Lascelles, No. 66 Squadron Royal Flying Corps
Technology
Maker: Unknown
Wooden propellor hub from a Sopwith Pup biplane. The hub is missing both blades of the propellor, which have been torn off.RELAWM17328
-
Piece of voice tube from SMS Hindenburg, Scapa Flow: Lieutenant John Alan Kenyon, Royal Naval Air Service
Technology
Maker: Unknown
Long thin steel tube with a flared end. The other end is torn. The original cream paint is scratched and chipped - a rectangle of unpainted metal towards the flared end is impressed with the word "Pei...RELAWM11745
-
Pipe from an Australian water cart : Gallipoli
Technology
Maker: Unknown
Section of steel piping with elbow fittings at each end, which have been screwed onto a shorter length of pipe. Each end of the piece has been crewed into a tee fitting, which then has another piece o...RELAWM00432
-
Pistol Holster : 2nd Lieutenant P G Neeson, 26 Battalion, AIF
Technology
Maker: Unknown
Small leather pistol holster used by 2nd Lieutenant P G Neeson. The holster has a large flap which would have been closed by a 'D' ring and tongue fastening, the ring of which is now missing. The flap...REL30916
-
Pistol holster with spare magazine for Dreyse Model 1907 semi-automatic pistol : Lieutenant E E Paterson, 22 Battalion, AIF
Technology
Maker: Unknown
Dreyse Model 1907 semi-automatic pistol holster with spare magazine. Dark brown leather with a top flap and a single belt loop at the rear. The flap retaining strap is broken off but attached to the ...REL36757.002
-
Plywood from shot-down German aircraft
Technology
Maker: Unknown
Piece of plywood (30 x 40 cm) bearing portion of black German cross national insignia. Donor's description states: "Part of Aeroplane brought down in No Man's Land at Hammel 1918. Note bullet hole. "REL/01326
-
18 pounder Artillery Cartridge Case
Technology
18 pdr artillery straight tapered case made from brass. Stamped on the the base are the calibre, gun and mark of the empty case. The year of manufacture, maker's initials are present and the letters C...REL31676
-
60 pounder Breech Loading Gun - damaged barrel muzzle
Technology
The muzzle end of a 60 pdr B L gun which was blown off due to a premature shell ignition caused by a defective fuze. The metal has been split longitudinally and shows all the damage caused by a catast...RELAWM00601
-
6 pounder Hotchkiss QF Mk II 6 cwt Gun shield
Technology
Maker: Hotchkiss, Elswick Ordnance Company
This gun shield was fitted to a 6 pounder Hotchkiss QF Mk II 6 cwt gun (RELAWM05041). The shield is made from 10 mm steel plate. It is painted grey and bears 'ghost' marks on the inner surface, the ...RELAWM05041.001
-
6 pounder Hotchkiss QF Mk II 6 cwt Male Tank Gun
Technology
This type of gun was used as the main armament on the Mark IV Male tanks during the First World War. The gun features a vertical sliding breech block. The recoil system is of the hydro-spring method. ...RELAWM05041
-
13 pounder Projectile with No 80/44 Time Fuze
Technology
Quick Fire 13 Pounder artillery projectile with Number 80/44 fuze as used by the 13 Pounder Quick Fire Mark 1 Gun during the First World War. The body of the shell is made from forged steel and has be...REL31803
-
10 pounder Screw Breech Mountain Gun
Technology
Maker: Royal Ordnance, London
10 pdr Breech-loading Mountain Gun, mounted on a two-wheeled rivetted steel carriage. The barrel is fitted with an interrupted screw breech, and is divided into two portions with a screwed connector i...REL46085
-
Prismatic compass : Lance Corporal J D Mack, 8 Light Horse Regiment, AIF
Technology
Circular, brass, prismatic compass. The disc shaped lid is detachable and can be fitted to the bottom of the compass when not required. There is a hinging brass vane bolted to the outside circumferenc...REL30423.001
-
Projectiles and shrapnel balls : Battleship Hill, Gallipoli
Technology
Collection of four .303 inch calibre projectiles and nine lead shrapnel balls. Six of the balls balls are 12.5 mm in diameter, two are 15 mm in diameter and one is 18 mm in diameter. All are misshapen...RELAWM07828.002
-
Propeller for German SSW Riesenflugzeug aircraft
Technology
Wooden laminated twin bladed propeller fitted to a German multi-engined R plane. Fabricated from 16 laminations, each lamination 12mm thick. Possibly from the same aircraft as RELAWM11639. Stamped...RELAWM11638
-
Propeller for 200HP Benz Aircraft Engine (Germany)
Technology
Maker: Becker Luftschrauben
German aircraft propeller for 200hp Benz engine. Light coloured laminated wood, 9 feet X 9 inches in length with steel hub fitting. Stamped on hub is the following: 'no 3831 200 P.S Benz D.297 stq.'...RELAWM11303
-
Propeller for 220HP Mercedes Aircraft Engine (Germany)
Technology
Maker: ETA
German Aircraft Propeller for 220HP Mercedes Engine. 3300 mm (10 feet 9 inches) in length, blades 300 mm (12 inches) in width. Wooden laminated construction, with a dark brown appearance. The wooden ...RELAWM11304
-
Propeller Tip: Air Mechanic First Class R Humphery, No. 2 Squadron Australian Flying Corps
Technology
Maker: Humphery, Richard Sir W. G. Armstrong, Whitworth and Company, Limited
Tip cut from laminated wooden propeller and fashioned into a photograph frame by 750 Private Richard Humphery, 1st Air Mechanic Australian Flying Corps. The propeller is believed to have been a four-b...REL34271
-
Propeller Tip: Air Mechanic First Class R Humphery, 2 Squadron Australian Flying Corps
Technology
Maker: Humphery, Richard
Tip cut from laminated wooden propeller and fashioned into a photograph frame by 750 Private Richard Humphery, 1st Air Mechanic, Australian Flying Corps. The propeller is believed to have been a four-...REL34272
-
Prussian Infantry Officer's Sword Scabbard
Technology
Prussian Infantry Officer's Sword Scabbard. Straight nickel plated scabbard with two loose rings attached to bands at 60 mm and 150 mm from the throat.REL/07278.002
-
Pulley from an observation balloon from USS New York
Technology
PULLEY, PART OF OBSERVATION BALLOON FROM USS 'NEW YORK' WHICH BROKE ADRIFT IN FIRTH OF FORTH IN 1918 AND DRIFTED ONTO THE BOWS OF HMAS SYDNEY. This object is a complicated pulley block that resemble...REL/00855
-
Railway locomotive brass manufacturers plate : 1 Squadron AFC bombing raid, Rayak
Technology
Maker: Saechsische (Sächsische) Maschinenfabrik vormals Richard Hartmann
Rectangular cast brass manufacturer's plaque with raised lettering, reading : 'SAECHS. MASCHINENFABRIK / VORM RICH. HARTMANN / ACTIEN-GESELLSCHAFT / 1906 CHEMNITZ. NO 3000'. There is a mounting hole i...RELAWM00447
-
Rbl. F. 14 Artillery Dial Sight and 10 cm K 14 sight carrier (Germany)
Technology
Maker: Fried Krupp AG (1903-1943)
Artillery panoramic sight, (Rundblick fernrohr) for a 10 cm K 14, secured in its sight holder. The sight Consists of a short telescope bent at right angles and surmounted by a moveable head. The head...RELAWM01937
-
Rbl. F. 16 Artillery Dial Sight (Germany)
Technology
The Rbl.F. 16 is a panorama sight (Rundblickfernrohr ) which consists of a short telescope bent at right angles and surmounted by a moveable head. The head is fixed on a horizontal graduated table and...RELAWM01936.002
-
Rbl. F. 16 Artillery Dial Sight (Germany)
Technology
The Rbl.F. 16 is a panorama sight (Rundblickfernrohr ) which consists of a short telescope bent at right angles and surmounted by a moveable head. The head is fixed on a horizontal graduated table and...RELAWM01936.001
-
Rbl. F. 16 Artillery Dial Sight (Germany)
Technology
Maker: Hensoldt and Sohne Optische Werke AG
The Rbl.F. 16 was a panorama sight (Rundblickfernrohr ) which consisted of a short telescope bent at right angles and surmounted by a moveable head. The head was fixed on a horizontal graduated table ...REL/07181.001
-
Rbl. F. 16 Artillery Sight : Bombardier G S Duke, 31 Battery, 8 Field Artillery Brigade, AIF
Technology
Maker: Goerz, Berlin
Optical artillery sight for use on First World War German field guns. The sight is made from machined steel, brass and optical quality glass. The sight components are screwed together using slotted he...REL34588
-
Rbl. F. 16 panoramic artillery sight
Technology
Maker: C P Goerz, Berlin E Esdaile & Sons
Brass and steel dial sight, converted from a German Rbl.F. 16 sight, captured during the First World War. The lower viewing aperture is missing the rubber eye rest but the sight is otherwise complete....REL32801
-
Rbl. F. 16 panoramic artillery sight
Technology
Maker: Hensoldt & Sohn, Wetzler
The Rbl.F. 16 was a panorama sight (Rundblickfernrohr ) which consisted of a short telescope bent at right angles and surmounted by a moveable head. The head was fixed on a horizontal graduated table ...REL24624
-
Rear drive flange, British Mark II tank: Bullecourt
Technology
Maker: Unknown
Rear drive exterior bearing plate flange from a Mark II British tank. Corroded.REL47915
-
Red fabric from fuselage of Baron Manfred von Richthofen's Fokker DR1
Technology
Maker: Fokker Aeroplanbau
Piece of fabric from the wing of a Fokker DR1 aircraft. One side is covered with red paint, which appears to have been applied as the first coat over the underlying linen. The red paint is an almost e...REL/00938.001
-
Red painted piece of Fokker wing strut : Baron Manfred von Richthofen, Geschwader 1, German Air Service
Technology
A length of wing strut removed from Rittmeister Manfred Albrecht Freiherr von Richthofen's Fokker Dr1 triplane soon after he was shot down on 21 April 1918. The strut, of distinct aerofoil shape, has ...RELAWM16029
-
Remains of a Lewis Light Machine Gun found at Pozieres : 6 Battalion, AIF
Technology
Maker: Birmingham Small Arms Co Ltd
Remains of a Lewis Light Machine Gun. Badly rusted and damaged. Missing the butt and barrel jacket. The barrel and cooling fins are bent from possibly being run over by a vehicle. The centre disc from...RELAWM07657
-
Remains of a Pattern 1907 bayonet scabbard : Gallipoli
Technology
Maker: Unknown
Remains of a Pattern 1907 bayonet scabbard, which consists of the locket and frog stud. The item is rusted overall (inert), with additional heavy corroded on one side and the back. The remains of drie...REL/10076
-
Remains of a pitcher grenade : Gallipoli
Technology
Maker: Unknown
Remains of a fragmentation grenade, similar in design to the Battye bomb, or the No. 13 or No. 14 pitcher grenade. The main body of the grenade is intact, but the igniter is absent. The sides of the b...RELAWM00434
-
Remains of a shovel : Lone Pine, Gallipoli
Technology
Maker: Isaac Nash & Sons Ltd
Remains of a general purpose flat point plain back strap pattern spade. The front strap is impressed with 'NASH & SONS / 1915' and the number '3' at an angle to the other text, but in larger script. S...RELAWM00395
-
Remains of a Webley Revolver : 15 Battalion, AIF
Technology
Remains of a Webley Revolver. Two parts being the breech section of the barrel frame and the blown apart cylinder.RELAWM00729
-
Remains of binoculars : Deadman's Ridge, Gallipoli
Technology
Maker: Unknown
Remains from the eyepiece end of a damaged pair of binoculars. The binoculars are badly misshapen and are coated with a layer of dried mud. No glass lenses are present. Part of the white metal (possi...REL/00835.002
-
Remains of 'cricket ball' grenades : Gallipoli Mission
Technology
Maker: Unknown
One whole 'cricket ball' grenade and two pieces of shrapnel, all rusted. The body of the grenade is complete, and includes the screw in plate which once held the fuse. The grenade is missing the fuse ...REL/09588
-
Renault FT Light Tank
Technology
Maker: Renault
Light two man tank with rivetted flat armoured plates. It has a fully rotating, manually operated, one man turret which has been fitted with an 8mm Hotchkiss machine gun. This turret is the first m...RELAWM05039.001
-
Republica Mexicana silver dollar : Surgeon-Lieutenant A C R Todd, HMAS Sydney
Technology
Maker: Unknown
Republic of Mexico silver dollar coin, salvaged from the SMS Emden. Coin displays extensive staining, including rust stains.REL31589
-
Republica Mexicana silver dollar : Surgeon-Lieutenant A C R Todd, HMAS Sydney
Technology
Maker: Unknown
Republic of Mexico silver dollar, salvaged from the SMS Emden.REL31588
-
Revolver holster : Lieutenant Colonel C H D Evans, New Zealand Cyclist Battalion
Technology
Maker: Unknown
Brown leather holster designed to carry a Mk VI Webley revolver on a Mk II Sam Browne belt. The holster is made from one piece of leather and stitched together on the curved side. The curved flap open...REL29635.002
-
Richtkreis 0-5800 scale indirect fire Turkish howitzer sight : Lieutenant H I Wikner, 7 Light Horse Regiment, AIF
Technology
Brass indirect fire gun sight, as fitted to German manufactured howitzers. The sight is shaped in the form of a 180 degree protractor. Two scales are engraved around the curved edge. These are etched ...RELAWM16625
-
Rigging Information Plate : Pfalz D.XII Scout
Technology
Maker: Unknown
Metal plate impressed with information concerning the rigging of the Pfalz Scout. Plate reads 'VERSPANNUNGSSCHEMA DXII / (illustration of Pfalz D.XII) / a 2040mm b 2010mm c 2300mm d 2280mm Hubkabel /...REL/00501
-
Right hand hood side panel for FWD Model B Four Wheel Drive Truck
Technology
Maker: Wisconsin Motor Manufacturing Co
Right hand hood side panel for FWD Model B Four Wheel Drive Truck.REL33289.002
-
Right wheel from 17 cm mittlerer Minenwerfer n/a (trench mortar) : Captain G F Lowther, 18 Battalion, AIF
Technology
Right wheel removed from German 17 cm mittlerer Minenwerfer neuer art (medium trench mortar, new model).RELAWM05013.003
-
Robbins Duddley Push Dagger : Private P G Shaw, 5 Pioneer Battalion, AIF
Technology
Maker: Robbins Ltd
Robbins Duddley Push Dagger combination trench dagger and knuckle duster fighting knife. Aluminium grip that has moulded finger grooves and a steel knuckle guard. It has a plain double edged stilletto...RELAWM09813
-
Rocket whistle
Technology
Metal rocket consisting of detachable head designed to create a whistle in flight, a main body section (length 22-cm. diameter . 3.5-cm.) marked "BMO 10/18"; and a hollow spigot tail. Overall length 4...REL/02923
-
Roller or idler axle with plate from side frame, British Mark II tank : Bullecourt
Technology
Maker: Unknown
Solid steel axle still attached to a torn section of plating from a tank side frame. Corrosion.REL47936
-
Ross Mark III Rifle : German Army (captured)
Technology
Canadian Ross Mark III bolt action rifle. Receiver marked ROSS RIFLE CO. CANADA M10 PATENTED over a crossed flags proof mark. The butt is stamped with the Quebec arsenal mark, III and the serial numbe...RELAWM00584
-
Royal Aircraft Factory SE5a scout / fighter aircraft
Technology
SE5a scout / fighter. It is a single-engined wood and fabric single-seat aircraft. Powerplant - Wolseley Viper V8 200 hp, Serial No. 74908, (installed) stationary 8 cylinder, upright 90-degree Vee wat...RELAWM11091
-
Royal Air Force Ceremonial Sword and Scabbard
Technology
Royal Air Force Ceremonial Sword and Scabbard. The hilt is a gilt brass half basket guard that has the GVR royal cypher and a crown over a flying eagle as the oval cartouche badge. The grip is white f...REL/19317
-
Royal Australian Navy AE2 'E' Class submarine 1:72 scale model
Technology
Maker: Cutting Edge Models Thales Australia
Model in 1:72 scale of the AE2 submarine, made from chemiwood (a urethane-based resin product), with fittings made from plastic, brass and other metals. The model is finished above the waterline in pa...REL37382.001
-
Royal Standard No. 5 Typewriter : Major General W Holmes and Brigadier General E A Wisdom
Technology
Maker: Royal Typewriter Company Inc
The Royal Standard No. 5 Typewriter is a flat bed design with 4 rows of keys. The space bar is made of wood and has a wear mark where the right thumb of the users would have struck it. The ribbon reel...RELAWM09438
-
RSC Model 1917 Rifle : French Army
Technology
RSC Model 1917 self loading rifle. Tubular receiver with a large right hand cocking lever and knurled end cap. Barrel stamped MA.T 1917. Two piece wooden stock (butt and fore end). Butt stamped Novemb...RELAWM03746
-
Russian Pattern 1881 Cossack Trooper's Shasqua Sword and Scabbard
Technology
Russian Pattern 1881 Cossack Trooper's sword and scabbard. The hilt has a brass ferrule and a pommel in the shape of a birds beak with a hole for a wrist strap. The wooden grips have diagonal grooves....REL/16728
-
Russian Prisoner of War hacksaw : Private H Horner, 3 Machine Gun Company, AIF
Technology
Maker: Unknown
Steel hacksaw hand-made from a corset busk. The saw is fitted with a 10 mm wide blade serrated along the top edge only. Metal arms are attached to the blade at right angles, which then fit into wooden...RELAWM01033
-
Savage Model 1915 Pistol: Portugese Military Forces
Technology
Savage Model 1915 Semi Automatic Pistol. Barrel marked with the company name, address and 1905 patent date. Left side of the frame is engraved SAVAGE. Black plastic checkered grips with the company tr...RELAWM03784.001
-
Savage Model 1915 Semi Automatic Pistol
Technology
Savage Model 1915 Semi Automatic Pistol. Barrel slide, with a groove along the top, is marked on the with the company name, address and .380 over the 1905 patent date and .9mm. The left side of the fr...REL/02165.001
-
Savage Model 1915 Semi Automatic Pistol : firing pin assembly and spring retainer
Technology
Firing pin assembly and spring retainer removed from Savage Model 1915 Semi Automatic Pistol for exhibition.REL/02165.002
-
Scabbard for Pattern 07 bayonet : Lance Corporal A Hembury, 16 Battalion AIF
Technology
Scabbard for Pattern 07 Bayonet. The scabbard has a blued chape and locket, with a tear drop frog stud, attached by wire staples to the brown leather body. The locket throat is stamped '4MD' over '593...REL/19479.002
-
Scabbard Mark. I for Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece
Technology
Pattern 07 bayonet scabbard and pattern 08 webbing frog.REL/07076.002
-
Scabbard Mark II. for Sword Bayonet, Pattern 1907, Mark I.
Technology
Maker: Unknown
The brown leather scabbard with stitching down the back has a steel frog stud locket and chape.REL29069.002
-
Scabbard Mark. II for Sword Bayonet, Pattern 1907, Mark. I : Private W G Hoffman, 32nd Battalion, AIF
Technology
Maker: Mills Equipment Company
Pattern 1907 bayonet scabbard and Pattern 1908 webbing frog. The frog has a belt loop and two web loops on the front through which the scabbard is fitted. On the reverse is a tab with a brass end used...RELAWM07759.005
-
Scabbard Mark II. for Sword Bayonet, Pattern 1907, Mark I. with hook on crosspiece : recovered from Ak Bashi, Gallipoli
Technology
Maker: Small Arms Factory, Lithgow
Steel mounted black leather scabbard with a tear drop shape frog stud on the locket. The locket and chape are attached by wire lace.RELAWM00392.002
-
Schofield Smith & Wesson Model 1875 Revolver
Technology
Smith & Wesson single action, six shot 'Russian' revolver. Break frame action marked Smith & Wesson Mod 1875 Russian. The barrel top rib has the manufacturers address and patent dates between 1865 - 1...RELAWM27437
-
Schusstafel fur Wurfgranate 15 (Baseplate for Grenade Launcher 1915)
Technology
Maker: Firma Alfred Wolff, Berlin Rheinischen Metallwaren und Maschinenfabrik, Dusseldorf Unknown
Model 1915 grenade launcher baseplate made from steel. The baseplate features a locking handle for the spigot mortar, a carry handle and an aluminium range scale plate. Markings - range scale figures.RELAWM01834
-
Schusstafel fur Wurfgranate 15 (Baseplate for Grenade Launcher 1915)
Technology
Maker: Maschinenfabrik Alfred Wolff
Steel base plate assembly for a model 1915 Wurfgranate. The base plate is fabricated from two main components, an angle iron which digs into the ground, and base plate which is pivoted onto the angle ...RELAWM10981
-
Schwarzlose M07/12 Machine Gun
Technology
Schwarzlose M07/12 Heavy Machine Gun. Water cooled jacket with a large cone flash hider at the muzzle. It has fold down wooden grips and is overall painted dark green. It is stamped on the left side W...RELAWM20109.001
-
Schwarzlose M7/12 Machine Gun Condensor Can
Technology
Schwarzlose M7/12 Machine Gun Condensor Can. The recessed top contains a filler cap and an inlet tap. The front has a square section key bar. Overall painted olive green.RELAWM20110
-
Schwarzlose M07/12 Machine Gun Tripod
Technology
Schwarzlose M07/12 Machine Gun Tripod. Folding tubular steel construction with bracing struts between the adjustable front legs and the single rear leg. A bracket on the rear leg is ajustable for elev...RELAWM20109.002
-
Scythe Blade
Technology
Scythe Blade. Tapering curved steel blade with a turned back edge. The side is etched with a coat of arms followed by K.K.PRIV.OB.OST.LANDESPAB.V.P.Z and a chalis surrounded with sun rays. The short s...RELAWM00879
-
Sectioned 9.2 inch Shrapnel Howitzer shell
Technology
Maker: Unknown
Sectioned 9.2 inch Shrapnel Howitzer shell. At top are two 23mm thick lines in light brown paint. Also stamped in white paint is "9.2". There is a 45mm thick copper driving band at the bottom. The sh...RELAWM07149
-
Section from German pre-fabricated observation post from Assevillers, near Peronne
Technology
Maker: Unknown
One of six component parts of a pre-fabricated bullet-proof steel observation post. The post is made from 5 interlocking rings of steel and a domed cap. This component is the fourth section down from ...RELAWM04477.002
-
Section of German aircraft lozenge fabric : Gunner R A Agassiz, 17 Battery, 6 Field Artillery Brigade, AIF
Technology
Maker: Unknown
Irregularly cut rectangle of printed lozenge aircraft linen, labelled on the reverse in blue ink: 'Portion of wing of a German aeroplane brought down near the British Lines. SOMME AUGUST 1918'. A mach...REL45732
-
Section of lozenge camouflage fabric : Albatros D.V, Fliegerabteilung 300 'Pascha', Imperial German Air Service
Technology
Maker: Unknown
Piece of five colour German lozenge fabric from Albatros D.V shot down on 2 August 1918, at 12.10pm (z) two miles (3.2 kilometers) north east of Ez Duba BY AFC, No.1 Squadron aircraft piloted by Lt Mc...REL/01354
-
Section of night lozenge camouflage aircraft fabric : Imperial German Air Service
Technology
Maker: Unknown
22.5 x 20.5 cm piece of linen fabric cut from the flying surface of a German aircraft. The uppermost (external) surface is almost black in appearance, to the extent that the different lozenge colours...REL/05646
-
Serial 306 Hunslet 4-6-0 T, narrow gauge locomotive : British Army
Technology
War Department, standard narrow gauge, 4-6-0 locomotive engine. Works number '1218' and War Department number '306'. The locomotive has been fully restored to represent service on the Western Front du...REL29508
-
Shell case salvaged from German raider Seeadler : Officer Steward E B Stidston, HMAS Encounter
Technology
Maker: Poltewerk, Magdeburg
105 mm fired brass shell case. The base is impressed with the following markings: 'III*; crown over M; POLTE; XI 1911; MAGDEBURG; 42'.RELAWM15157
-
Ship badge : HMCS Victoria and HMAS Parramatta
Technology
Maker: Unknown
Cast iron ships badge. The central medallion features the bust of a young woman, with the name 'VICTORIA' in raised letters around the border. On either side is a flag, with a bar beneath the central ...RELAWM09404
-
Shipbuilder's model : Ambulance Transport 'Warilda'
Technology
Maker: William Beardmore & Company
A 1/30 scale full hull shipbuilder’s model of H.M.A.T. 'Warilda', painted to represent its service as an Ambulance Transport, with sawtooth dazzle camouflage. The model measures 4092mm in length and s...RELAWM00277
-
Ship model : HMAS Australia (I)
Technology
Maker: John Brown & Co Ltd
Scale model of the Indefatigable class battlecruiser, HMAS 'Australia', built by John Brown and Co Ltd, Sheffield and Clyde Bank in 1:64th scale. Most of the small fittings are made from soldered bras...RELAWM09096
-
Ships engine room clock : SS Devanha
Technology
Brass engine room clock from the SS Devanha. The clock is marked in Roman numerals and is equipped with a bevelled glass cover within a circular hinged brass frame. Printed on the clock face is text w...REL32383
-
Ship's lifeboat from HMT Devanha which was used during the landings at Gallipoli
Technology
Maker: Unknown
The number 5 timber lifeboat from the P&O ship SS Devanha. The lifeboat is of clinker construction and has single bow and stern posts connected to a heavy exposed keel. The posts are made up of sever...RELAWM04994
-
Ship's structural training model of SMS Emden showing bulkhead, decks and fire control
Technology
Maker: Unknown
Large model of the internal structure of the hull and superstructure of the light cruiser SMS 'Emden'. The model is based on a solid cast steel keel frame, running the length of the model, with integr...RELAWM00279
-
Ship's wheel from HIJMS 'Ibuki'
Technology
Maker: Kure Naval Arsenal
Circular wooden spoked wheel, with eight carved balustered spokes, reinforced around its front and rear circumferences with brass banding. There appear to be Japanese markings on this band. The centra...RELAWM08238
-
Shortened Sword Bayonet, Pattern 1907, Mark I. and Scabbard
Technology
Maker: Small Arms Factory, Lithgow
Pattern 07 (shortened) bayonet with scabbard and belt webbing. The blade has been ground down to 23cm and the scabbard modified accordingly. The manufacturer's name (Lithgow) is impressed on one side ...REL/05988